Mada za sehemu hiiPerforming fillingMada 3
- Performing flat filing
- Performing radii filing
- Performing angle filing
Angle Filing in Bench Work
Angle filing is a bench work skill used to create or refine angled surfaces on metal workpieces. It involves using a file to remove material and shape the work piece to a specific angle required for proper fit and function. This skill is essential in auto-electric mechanics when fitting components, creating mounts, or adjusting electrical equipment brackets.
Angle filing serves several important purposes in workshop practice:
- Creating precise angled surfaces for proper component alignment
- Fitting electrical components and mounts to correct specifications
- Removing burrs and rough edges from cut metal
- Adjusting brackets and mounting plates for automotive electrical systems
Before performing angle filing, ensure you have the following tools:
- Flat file and half-round file
- Try square for checking angles
- Steel rule for measuring
- Scriber for marking
- File card for cleaning the file
- Marking gauge or divider
- Work bench with a vice
Always observe these safety measures when performing angle filing:
- Wear safety clear glasses to protect eyes from metal filings
- Wear gloves to protect hands from sharp edges
- Wear safety boots to protect feet from dropped objects
- Secure the workpiece firmly in a vice
- File only in a forward motion; never pull the file back toward you
- Use a file card to clean the file regularly
- Keep your work area clean and free of debris
Step 1: Marking the Workpiece
- Measure and mark the required angle on the workpiece using a steel rule and scriber
- Use a protractor or bevel protractor to set the correct angle
- Draw clear guidelines along the marking lines
- Mark waste material with an "X" to indicate which side to remove
Step 2: Securing the Workpiece
- Place the workpiece securely in a vice on the work bench
- Ensure the marked area is accessible and protrudes above the vice jaws
- Check that the workpiece will not move during filing
Step 3: Rough Filing
- Select an appropriate file (flat file for flat angles, half-round for curved)
- Hold the file at the marked angle
- File along the waste material using long, even strokes
- Remove material gradually, checking frequently
- Stop when you are approximately 1mm from the guideline
Step 4: Finish Filing
- Switch to a finer file for the final passes
- File carefully, just touching the guideline
- Use the try square to check the angle periodically
- Continue until the angle matches the required specification
Step 5: Cleaning and Checking
- Remove all burrs and sharp edges
- Use a file card to clean the file
- Check the finished angle with a try square or protractor
- Verify dimensions with a steel rule
A student needs to file a metal bracket to a 45-degree angle for mounting an alternator:
- Measure the metal strip: 10mm × 200mm
- Mark a 45-degree line using a bevel protractor
- Secure the bracket in the vice
- Use a flat file to remove material along the marked line
- Check periodically with a try square
- Continue filing until the angle is exactly 45 degrees
- Remove burrs and clean the surface
| Angle | Application |
|---|---|
| 90 degrees | Right-angle brackets for mounting boxes |
| 45 degrees | Chamfered edges for easy wire routing |
| 30 degrees | Slanted mounts for battery terminals |
In Tanzania, angle filing is used when repairing vehicle electrical systems at local garages and workshops. For example, when a mechanic at a garage in Mwanza needs to repair a mounting bracket for a car alternator, they use angle filing to create a proper 45-degree fit. This ensures the alternator is mounted securely, allowing the vehicle's charging system to work reliably and preventing breakdowns on Tanzanian roads.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret drawings
- Select tools and equipment
- Take measurements and marking
- File work piece
- Grind work piece
- Check for accuracy
- Observe safety precautions
- Clean tools, work piece and work place
- Store tools, equipment and work piece
Tathmini ya matokeo
Angle filled work piece conforms to drawing and specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Perform angle filing
Principles: The student should explain the principles involved in preforming angle filing:
Theories: The student should:
- Explain applications of angle filled workpiece
- Proper use of files and equipment
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions Workshop rules and precautions
Swali
What is the primary purpose of angle filing in auto-electric mechanics?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado