Mada za sehemu hiiMeasuring electric quantitiesMada 4
- Measuring voltage in the circuit
- Measuring current in the circuit
- Measuring resistance in the circuit
- Measuring power in the circuit
Measuring Voltage in the Circuit
Voltage is a measure of electric potential difference between two points in an electrical circuit. In simpler terms, it is the force or pressure that pushes electric current through a wire or component. The symbol for voltage is V, and its SI unit is the volt (V).
Voltage is essential for the operation of all electrical and electronic devices in a vehicle. Without sufficient voltage, electrical components such as lights, sensors, and the starter motor will not function properly.
The instrument used to measure voltage is called a voltmeter or a digital multimeter (DMM). A multimeter is a versatile tool that can measure voltage, current, resistance, and other electrical quantities.
Digital Multimeter (DMM)
A digital multimeter is an essential tool for automotive electrical work. It combines several measurement functions into one device. The main parts include:
- Display: The LCD screen where measurement readings appear
- Function Dial: A rotary switch to select the type of measurement (V, A, Ω)
- Range Selector: Allows selection of the appropriate measurement range
- Test Leads: Red (positive) and black (negative) probes for connecting to the circuit
- Ports: Input sockets, usually labeled COM (common), VΩmA, and sometimes 10A
Connecting the Voltmeter
When measuring voltage, the voltmeter or multimeter must be connected in parallel (across) the component or section of the circuit whose voltage you want to measure. This means connecting one lead to each side of the component.
Follow these steps to measure voltage in a circuit safely:
- Insert the red test lead into the VΩmA receptacle.
- Insert the black test lead into the COM receptacle.
- Rotate the selector to the DCV (Direct Current Voltage) position for battery testing.
- Select an appropriate voltage range (choose a range higher than the expected voltage).
- Connect the red lead to the positive (+) terminal of the battery or component.
- Connect the black lead to the negative (–) terminal.
- Turn on the circuit if necessary and read the voltage displayed on the screen.
- Record the reading and switch off the multimeter after use.
A 12V car battery is connected to a headlamp. Use a digital multimeter to measure the voltage across the lamp terminals.
Solution:
- Set the multimeter to DCV mode with a range of 20V.
- Connect the red lead to the positive terminal of the lamp.
- Connect the black lead to the negative terminal of the lamp.
- The multimeter displays 12.0V (or close to 12V if the battery is fully charged).
This shows that the full battery voltage is available across the lamp terminals.
- Voltage is measured in volts (V).
- Use a voltmeter or multimeter to measure voltage.
- Always connect the voltmeter in parallel with the component.
- Red lead connects to positive (+); black lead connects to negative (–).
- Select a voltage range higher than the expected voltage to avoid damaging the meter.
- Always ensure the circuit is de-energized before making connections when required.
In Tanzania, auto-electricians use voltage measurement daily to diagnose battery and charging system problems in vehicles. For example, when a car won't start in Dar es Salaam, a mechanic tests the battery voltage with a multimeter—if it reads below 12.4V, the battery needs charging or replacement. This skill is essential for small garage owners and mechanics working on matatus, trucks, and private vehicles across the country.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment, materials and relevant PPE
- Connect simple electric circuits
- Identify measuring points
- Measure electrical voltage
- Observe safety
- Clean tools, equipment and work place
- Store tools and equipment
Tathmini ya matokeo
Measured voltage values conform to standard values
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Measure components voltages
Principles: The student should explain principle involved in measuring voltage in the circuit
Theories: The student should explain:
- Procedure for measuring voltage in a circuit or component
- Meaning of Electromotive Force (EMF)
- Voltage Drop (V,d)
- Potential Difference (P d)
- Application of colour codes
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions
- First aid
- Workshop rules and regulations
Swali
What is the SI unit of voltage?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado