Mada za sehemu hiiReplacing tyresMada 3
- Replacing worn tyre
- Refilling pressure and foam material in tyre
- Performing tyre rotation
Maintaining proper tyre pressure and foam material is essential for vehicle safety, fuel efficiency, and tyre durability. Under-inflated or over-inflated tyres can cause poor handling, increased fuel consumption, and premature wear. Foam material is sometimes used in special applications to provide additional support or reduce vibration.
Before starting any tyre work, gather the following tools:
- Vehicle with wheels
- Stopper/blocks (to secure the vehicle)
- Jack and wheel spanner
- Air compressor
- Pressure gauge
- Tyre lever
- Foam material (if required)
- Safety gear: gloves, safety boots, overall, safety clear glasses, mask
Always follow these safety rules when working with tyres:
- Park the vehicle on level ground and apply the handbrake
- Place stoppers/blocks around the wheels to prevent rolling
- Wear protective clothing: overall, safety boots, gloves, safety glasses, and mask
- Ensure the vehicle is securely supported before working underneath
- Do not exceed the manufacturer's recommended tyre pressure
- Keep face and body away from the valve stem when checking or inflating
Step 1: Inspect the Tyre
Before checking pressure, visually inspect the tyre for:
- Cuts, cracks, or punctures on the tread and sidewall
- Bulges or uneven wear
- Foreign objects lodged in the tyre
Step 2: Remove the Valve Cap
Turn the valve cap counterclockwise to remove it. Keep the cap in a safe place.
Step 3: Check the Pressure
- Place the pressure gauge firmly onto the valve stem
- Press down evenly to create a seal
- Read the pressure value on the gauge
- Compare with the recommended pressure (usually found on a sticker in the driver's door jamb or in the vehicle manual)
Example
If a tyre shows a reading of 25 PSI but the vehicle manufacturer recommends 32 PSI, the tyre is under-inflated by 7 PSI. The driver needs to add air until the correct pressure is reached.
Step 1: Connect the Air Compressor
Attach the air hose connector to the valve stem firmly.
Step 2: Inflate the Tyre
- Turn on the air compressor
- Watch the pressure gauge closely
- Inflate in short bursts, checking the pressure after each burst
- Stop inflating when the recommended pressure is reached
Step 3: Check the Pressure Again
After inflating, use the pressure gauge to verify the final reading matches the recommended value.
Step 4: Reinstall the Valve Cap
Screw the valve cap back on tightly to prevent dirt and moisture from entering.
Foam material (foam inserts or tyre foam) may be used in some applications, such as:
- Preventing flat tyres in slow-moving vehicles
- Providing extra cushioning
- Reducing vibration
Step 1: Deflate the Tyre
If the tyre has air, release it by pressing the valve core with a tool or depressing the valve stem.
Step 2: Apply the Foam Material
- Follow the manufacturer's instructions for the specific foam product
- Insert the foam material into the tyre using a tyre lever if necessary
- Ensure even distribution inside the tyre
Step 3: Inflate the Tyre
Inflate the tyre to the recommended pressure as described above.
Step 4: Check for Proper Fit
Ensure the tyre sits evenly on the rim and the foam material does not cause uneven inflation.
- Check tyre pressure when tyres are cold for accurate readings
- Use the correct pressure specified by the vehicle manufacturer
- Always wear safety gear when working with tyres
- Inspect tyres regularly for damage before inflating
- Keep valve caps secure to protect the valve stem
In Tanzania, taxi and daladala drivers regularly check tyre pressure at local garages to ensure passenger safety and save fuel. For example, a driver in Dar es Salaam maintaining correct tyre pressure can save money on fuel costs, which is important when operating small businesses like a motorcycle taxi (bodaboda) where every shilling counts. Properly inflated tyres also last longer, reducing the need for frequent replacements which can be expensive for Tanzanian families.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools and equipment
- Inspect tyres for under pressure
- refill pressure and foam material in tyre Observe safety precautions
- Clean tools, equipment and work place
- Store tools and equipment
Tathmini ya matokeo
Refilled pressure and foam material tyre conforms to technical specifications and standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to refill pressure and foam material in tyre
Principles: The student should explain the principles involved refilling pressure and foam material in tyre
Theories: The student should explain:
- Functions of pressure and foam material in tyres
- Importance of refilling pressure and foam material in tyre
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions
- Manufacturer’s services manual book
Swali
When should tyre pressure be checked to get an accurate reading?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado