Step 1: Prepare the Work Area
Clean the pole area thoroughly to remove dirt, old sealant, and debris. This ensures you can see any damage or misalignment clearly.
Step 2: Visual Inspection
Examine the pole or frame carefully by sight. Look for:
- Visible bends or dents
- Uneven surfaces
- Signs of previous repair or damage
Step 3: Check Straightness Using a Strung Chord
This is the most common method for checking straightness:
- Tie a length of strung chord to a fixed point at one end of the pole
- Stretch the chord tightly along the length of the pole
- Observe the gap between the chord and the pole surface at multiple points
- If the chord touches the pole evenly along its entire length, the pole is straight
- Any gap indicates a bend or uneven area that must be corrected
Step 4: Measure and Record
Use a measuring tape to measure any gaps or irregularities. Record these measurements to determine how much correction is needed.
Step 5: Straighten if Necessary
If the pole is not straight, use appropriate tools such as soft hammers, panel hammers, or specialized frame straightening tools to gently push the metal back into alignment. Re-check with the strung chord after each adjustment.
Step 6: Final Verification
After straightening, perform the strung chord check again to confirm the pole is now straight before proceeding with windscreen or vent glass installation.