Mada za sehemu hiiServicing electrical wiring systemMada 2
- Checking electrical switches and relays
- Checking lighting system
Checking Electrical Switches and Relays
A vehicle's electrical system relies on switches and relays to control the flow of electricity to various components. When these devices fail, the affected system stops working. This study note explains how to identify, check, and troubleshoot faulty switches and relays in vehicle electrical systems.
The vehicle body supports the layout of the electrical system, which is involved in generating, storing, supplying, and consuming electric energy to make the vehicle operate efficiently. The flow of electricity is controlled by switches and relays.
An electrical switch is a device used to turn on (closed) or turn off (open) the flow of electricity in a vehicle's electric circuit. A relay is an electronically controlled switch that uses a small electrical input to control a larger electrical circuit, allowing a low-power switch to operate high-power devices safely.
The vehicle electrical system has four major groups of parts:
Storage Part (Battery)
A vehicle battery is an electrochemical device that converts chemical energy into electrical energy. The battery consists of six cells that store electrical energy. Its main role is to deliver electric energy used in the vehicle, especially when the engine is not running.
Electric Generator (Alternator)
The alternator is a power generator that uses mechanical energy from the engine, through electromagnetic principles, to produce electrical energy. The energy generated powers vehicle systems while running, and excess energy is sent to the battery for storage.
Consumer
The vehicle electrical consumers are all devices and systems that draw energy from the vehicle's electrical system. These include:
- Starting system (cranks the engine)
- Lighting system (headlights, tail lights)
- Ignition system
- Accessories (radio, wipers, horns, air conditioner)
Electrical Circuit (Wiring)
Electrical circuits are the layouts of routed wires that transfer electric energy from the source to various electrical components. The wires are joined with connectors that can be disconnected for service. Each circuit serves a specific function.
Circuit Control Devices
These devices control the flow of electricity or break the circuit to protect components from damage. A fuse is a safety device that protects wiring and circuits by breaking the electric circuit when current exceeds a safe level.
An automotive electrical system has switches used to control the flow of electric power. Switches turn circuits on or off, allowing the driver or vehicle systems to control electrical components.
Mechanical Switches
Mechanical switches are manually operated and require human intervention. The main types used in vehicles are:
- Keylock switches – operated by the vehicle key
- Rocker switches – flipped up or down by hand
- Push button switches – pressed to activate
Electronic/Auto Electronics Switches
Electronic switches operate automatically without direct human intervention. The main types are:
Transistor switch: An electronic device made of semiconductor materials with at least three terminals (emitter, base, and collector). When current is applied to one pair of terminals, it controls current through the other pair.
Relay switch: An electronically controlled switch (solid-state) that takes a small electrical input to switch a high-powered circuit. Relays control power windows, headlights, and other high-power circuits that normal switches cannot handle alone.
Switches and relays may fail due to:
- Burned contacts – caused by electric arcing and overload
- Wear – from frequent use over time
- Dirt accumulation – deposit of dust, oil, and water vapour
- Electrical faults – problems in other circuit components causing discontinuity
The following tools are used during checkup:
- Screwdrivers (for unscrewing)
- Spanners (for bolts)
- Combination pliers (gripping and cutting)
- Cutter pliers (cutting wires)
- Soldering gun and solder wire (for joints)
- DC test light – tests continuity and presence of DC voltage
- Multimeter – measures resistance, current, volts, and frequency (both DC and AC)
Follow these steps under proper supervision:
- Select proper materials, tools, and equipment.
- Wear personal protective equipment (overall, safety boots, gloves).
- Observe safety precautions.
- Park the vehicle in a safe position with wheel chocks applied.
- Identify and locate the faulty switches.
- Turn off the vehicle ignition switch.
- Disconnect battery power – always remove the negative terminal first.
- Use proper tools to disconnect the switch from the circuit.
- Check for voltage supply and continuity using a multimeter or DC test light.
- Identify and replace faulty switches or relays.
- Reconnect the battery.
- Test the system to confirm proper operation.
- Clean the working area and store tools according to workshop regulations.
Problem: A vehicle's headlights do not turn on when the driver operates the combination switch.
Checking procedure using a multimeter:
- Ensure the ignition is off and battery negative terminal is disconnected.
- Locate the headlight relay (usually in the fuse/relay box under the hood).
- Set the multimeter to continuity (Ω) mode.
- Check if the relay has continuity between its terminals when not energized – no continuity indicates a faulty relay.
- If the relay is good, check the combination switch for continuity when operated – absence of continuity means the switch is faulty.
- Replace the faulty component and reconnect the battery.
- Test the headlights to confirm they work properly.
In Tanzania, a mechanic at a local garage in Dar es Salaam or Arusha uses these skills daily when customers bring vehicles with non-working headlights, windscreen wipers, or horn problems. For example, a taxi driver in Mwanza whose hazard lights have stopped flashing will need the mechanic to check the hazard switch and related relays—skills directly learned from this topic. The mechanic uses a multimeter (costing around TSh 50,000-150,000) to diagnose whether the switch, relay, or wiring is faulty before replacing only the necessary part, saving the customer money.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select relevant safety gears, tools and equipment
- Use service manual
- Repair electrical parts
- Check relays
- Check electrical switches light
- Observe safety precautions
- Clean tools, equipment and work place
- Store tools and equipment
Tathmini ya matokeo
The electrical switches and relays conform to technical specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The student should elaborate how to:
- Check relays and switches
- Measure electrical components
Principles: The student should state the principles of checking and performing measurements of relays and switches
Theories: The student should:
- Define the concept of vehicle electrical wiring system
- Explain the layout of electrical system
- Define light combined switch
- Explain the functions of relays and switches
- Distinguish types of switches and relays
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions to be observed while doing the task
Swali
What is the main function of an electrical relay in a vehicle?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado