Mada za sehemu hiiServicing electrical wiring systemMada 2
- Checking electrical switches and relays
- Checking lighting system
Checking Vehicle Lighting System
The vehicle lighting system provides illumination during darkness and foggy conditions, and it also serves as a communication tool between drivers and other road users. As a technician, you must be able to check and ensure that all lighting circuits are functioning properly for safety on the road.
The lighting system consists of six main components that work together:
- Battery – The main power source that supplies electricity to the lighting system whether the engine is running or not
- Wires – Thin copper conductors that carry electricity from one point to another within the system
- Fuse – A safety device that protects the electrical system from damage caused by high current
- Controlling switch (combination switch) – The switch used to turn lights on or off and to select high or low beams
- Relay – An automatic switch that uses small power to control a large power circuit; it also protects the combination switch
- Bulbs/Lamps – Light-emitting components that glow when they receive electricity
The vehicle lighting system has several circuits, each serving a different function:
- Headlight system circuit – Produces light for night driving. It includes low beam (short distance) and high beam (long distance) options
- Turn signal lights – Flashing lights that indicate the direction a driver intends to turn
- Hazard lights – Flashing lights on both sides that warn other road users of an emergency or hazard
- Parking lights (sidelights) – White or amber lights at the front and rear corners that keep the vehicle visible when parked
- Brake lights – Red lights at the rear that illuminate when the brake pedal is pressed
- Reverse lights – White lights at the rear that illuminate when the vehicle is in reverse gear
Follow these steps to check the lighting system properly:
Step 1: Prepare the Vehicle and Tools
- Park the vehicle on a level surface and apply wheel chocks
- Wear personal protective equipment (overall, safety boots, gloves)
- Gather required tools: multimeter, test light, screwdrivers, combination pliers, circuit cleaner
Step 2: Check the Bulbs
- Visually inspect each bulb for signs of corrosion, cracks, or discolouration
- Test each bulb by turning on the respective switch
- Replace any damaged or non-working bulbs
Step 3: Check the Headlight Housing
- Inspect the housing for cracks, damage, or corrosion
- Ensure the lens is not obscured by dirt or damage
- Replace or repair the housing if any damage is found
Step 4: Inspect the Electrical System
- Check all fuses for burnout or damage
- Test relays for proper operation
- Inspect connectors and wiring harnesses for loose connections or corrosion
- Check the combination switch for proper operation
- Use a multimeter to test for voltage, continuity, and resistance
Step 5: Check Specific Circuits
- Headlights: Test both high and low beams
- Turn signals: Check both left and right flashing
- Brake lights: Press the brake pedal and verify rear illumination
- Parking lights: Turn on parking lights and check all corners
A driver in Dar es Salaam reports that the brake lights are not working when the brake pedal is pressed. As a technician, you would:
- First, check if the brake light bulbs are damaged or burned out
- Use a multimeter to test for voltage at the brake light bulb socket when the pedal is pressed
- If no voltage is present, check the brake light fuse for continuity
- Test the brake light switch (located near the brake pedal) for proper operation
- Inspect all wiring connections for loose or corroded terminals
- Replace any faulty components found during the inspection
This systematic approach ensures that the actual cause of the problem is identified and fixed.
- Burned or damaged bulbs
- Blown fuses due to electrical overload
- Faulty relays that fail to switch on
- Worn or damaged switches
- Loose or corroded electrical connections
- Broken or damaged wiring harnesses
In Tanzania, a small mechanic workshop in Mwanza or Arusha relies on properly functioning vehicle lighting systems to pass vehicle inspection at the NIDA (National Identification Authority) testing centers. When a taxi driver from a local market brings a vehicle for inspection, the technician checks all lighting circuits—including headlights, brake lights, and turn signals—to ensure they meet road safety requirements. Using a multimeter (costing around TSh 50,000-80,000), the technician can quickly diagnose faulty bulbs, fuses, or wiring issues, repair them, and help the driver obtain a roadworthy certificate needed for public transport operations.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Interpret lighting circuit diagrams
- Check signal turning and hazard light circuit
- Check reverse light circuit
- Check brake light circuit
- Observe safety precautions
- Clean tools, equipment and workplace
- Store tools and equipment
Tathmini ya matokeo
The light system conforms to technical specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The student should provide a detailed account on how to:
- Check lighting system
- Measure electrical components
Principles: The student should explain the principles of checking lighting system
Theories: The student should:
- Explain layout of electrical system
- Distinguish types of electrical lights
- Elaborate the functions of electrical system
- Elaborate functions of lighting system
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions to be observed while doing the task
Swali
Which of the following is NOT a component of the vehicle lighting system?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado