Mada za sehemu hiiPerforming filingMada 3
- Performing flat filing
- Performing radii filing
- Performing angle filing
Performing Angle Filing
Angle filing is a bench work technique used to create precise angles or corners on metal workpieces by removing excess material using a file. This skill is essential in motorcycle mechanics for shaping and finishing metal components to exact specifications.
Angle filing involves the removal of excess or unwanted materials from a workpiece to create precise angles or corners. It is done by manually scraping the metal surface with a file—a handheld tool with abrasive teeth. The goal is to achieve specific angle measurements required by technical drawings, ensuring that parts fit together correctly during assembly or repair work.
Before performing angle filing, gather the following tools and materials:
Tools and Equipment:
- Work bench
- Angle file (flat file or triangular file)
- Bench vice
- Try square
- Steel rule
- Centre punch
- Scriber
- Divider
Materials:
- Oil (for lubrication)
- Cotton waste (for cleaning)
- Workpiece (metal to be filed)
Safety Gears:
- Safety boots
- Overall (workwear)
- Leather gloves
- Safety goggles
Follow these systematic steps to perform angle filing correctly:
Step 1: Safety First
- Wear all required personal protective equipment (PPE): safety boots, overall, leather gloves, and safety goggles.
Step 2: Interpret the Drawing
- Read and understand the technical drawing showing the required angle dimensions.
- Identify the specific angle to be filed (such as 45°, 90°, or V-shape).
Step 3: Mark the Angle
- Use a scriber, steel rule, and divider to mark the angle on the workpiece.
- Use a centre punch to create starting points for filing.
Step 4: Select the Right File
- Choose an appropriate file based on the type of angle required:
- Flat file: for wide angles and flat surfaces
- Triangular (three-square) file: for internal corners and acute angles
- Half-round file: for curved angles
Step 5: Clamp the Workpiece
- Secure the workpiece firmly in the bench vice.
- Ensure the marked area is accessible and protruding above the vice jaws.
Step 6: Perform Angle Filing
- Hold the file firmly with both hands.
- Position the file at the marked angle on the workpiece.
- Apply even pressure while pushing the file forward in smooth, controlled strokes.
- Lift the file on the return stroke to prevent damage.
- Continue filing until the unwanted material is removed and the desired angle is approached.
Step 7: Check Angle According to Drawing
- Use a try square or protractor to verify the filed angle matches the technical specification.
- Make minor adjustments if the angle is not accurate.
Step 8: Clean and Store Tools
- Remove all metal filings from the workpiece using cotton waste.
- Clean the file with a file card to remove debris from the teeth.
- Return all tools and equipment to their proper storage locations.
Task: Create a V-shape angle on a mild steel workpiece of 150mm × 50mm × 12mm.
Procedure:
- Mark two lines on the workpiece that will form a 90° V-shape (45° on each side of the center).
- Clamp the workpiece securely in the vice with the marked area facing upward.
- Select a flat file for rough filing and a triangular file for finishing the V-shape.
- File along both marked lines, removing material gradually.
- Check the angle frequently using a try square.
- Continue until the V-shape is complete and the angle measures 90°.
Proper maintenance ensures tools remain effective and safe to use:
Cleaning:
- Clean the file regularly using a file card, wire brush, or compressed air to remove metal filings from the teeth.
- Never use oil on the cutting face of a file—it causes the file to slide instead of cutting.
Storage:
- Store files in a dry environment to prevent rusting.
- Use a file rack or drawer to keep files organized and protected from damage.
Handling:
- Always handle files with clean hands to prevent oil transfer.
- Never use a file without a proper handle—the tang can cause serious injury.
Inspection:
- Check files periodically for signs of wear, damage, or dulling.
- Replace files that show significant wear or damaged teeth.
Rust Removal:
- If rust appears, remove it promptly using a wire brush or abrasive pad.
- Apply a rust inhibitor after cleaning.
- NEVER use a file without a handle—serious injury may result if the tang penetrates your hand.
- Use a file brush (file card) to clean the file, not your hand—metal chips can cause painful infections.
- Files are brittle—do not use them as hammers or strike them, as they may shatter and cause flying chips.
- Never wipe filings away with your bare hand.
- Keep fingers away from the file teeth while cleaning.
In Tanzania, angle filing is a valuable skill for motorcycle mechanics in local repair shops. For example, when repairing a damaged motorcycle frame or fabricating custom brackets for farm equipment, a mechanic in Arusha or Dar es Salaam would use angle filing to create precise 45° or 90° joints that ensure structural strength and proper fit. This technique is also used by metalworkers at small workshops to modify agricultural tools, ensuring that repaired equipment functions safely and efficiently for farmers.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret drawings.
- Select tools
- Take measurements and marking
- perform angle filing on work piece
- Check for accuracy
- Observe safety precautions.
- Clean tools, work piece and work place
- Store tools, equipment and machines
Tathmini ya matokeo
Angle filing performed as per provided worksheet
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how: perform angle filing
Principles: The the principles of:
- Performing angle filling
- angle filling process.
Theories: The student should explain: Uses of angle filling tools and equipment
- Safety precautions while performing angle filling process. Safe handling of work
Swali
What is the main purpose of angle filing in motorcycle mechanics?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado