Mada za sehemu hiiPerforming tyres serviceMada 3
- Replacing worn tyres
- Repairing punctures
- Refilling tyres pressure
Maintaining the correct tyre pressure is essential for motorcycle safety, performance, and tyre longevity. Under-inflated or over-inflated tyres can cause poor handling, increased fuel consumption, and faster tyre wear. As a motorcycle mechanic, you must know how to check and refill tyre pressure correctly.
Before starting the tyre pressure service, gather all necessary tools and equipment:
- Tyre pressure gauge (analog or digital)
- Air compressor with regulated output
- Service manual for the motorcycle
- Tool kit (for removing valve cap)
- Safety gear: overall, safety boots, safety clear glasses
Always observe safety measures when working with tyres and compressed air:
- Wear safety boots to protect your feet from heavy objects
- Wear safety clear glasses to protect your eyes from debris or air bursts
- Wear overalls to protect your clothing
- Ensure the motorcycle is on a stable stand before checking tyres
- Never exceed the manufacturer's recommended pressure
Step 1: Read the Service Manual
Consult the motorcycle service manual to find the correct tyre pressure for both front and rear tyres. The recommended pressure is usually given in psi (pounds per square inch) or kPa (kilopascals).
Step 2: Check Current Tyre Pressure
- Remove the valve cap from the tyre valve stem
- Press the tyre pressure gauge firmly onto the valve stem
- Read the pressure reading on the gauge
- Compare the reading with the manufacturer's recommended pressure
Step 3: Adjust Tyre Pressure
If the pressure is too low (under-inflated):
- Connect the air compressor hose to the valve stem
- Inflate the tyre in short bursts, checking the pressure after each burst
- Stop inflating when the correct pressure is reached
If the pressure is too high (over-inflated):
- Press the centre pin on the valve stem briefly to release air
- Re-check the pressure until it reaches the correct value
Step 4: Final Check and Completion
- Re-check the tyre pressure after adjusting
- Replace the valve cap tightly on the valve stem
- Repeat the process for the other tyre if needed
A motorcycle's rear tyre has a current pressure of 28 psi, but the service manual recommends 32 psi for the rear tyre. The mechanic needs to add 4 psi to reach the correct pressure.
The mechanic:
- Connects the air compressor to the valve stem
- Inflates the tyre in short bursts, checking after each burst
- Stops when the gauge reads 32 psi
- Removes the hose and replaces the valve cap
The tyre is now correctly inflated and ready for safe riding.
- Not checking pressure when the tyre is cold (pressure increases when tyre is warm)
- Over-inflating the tyre beyond the recommended limit
- Using a damaged or inaccurate pressure gauge
- Forgetting to replace the valve cap after refilling
In Tanzania, motorcycle riders commonly use their bikes for transport business (bodaboda) and delivery services. A correctly inflated tyre saves fuel — with petrol costing around TSh 3,000 per litre, maintaining proper tyre pressure can help a bodaboda rider reduce daily fuel costs by several thousand shillings. Additionally, proper tyre pressure extends tyre life, which is important because quality motorcycle tyres can cost TSh 80,000 or more in local markets.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools and equipment
- Check tyre
- Adjust tyre
- Test tyre
- Observe safety precautions
- Store clean tools, equipment and workplace
- Store tools and equipment
- Properly dispose wastes
Tathmini ya matokeo
Tyres pressure refiled as per manufactures guideline.
Tathmini ya maarifa
Knowledge evidence: Detailed knowledge of
Method used: The student should explain how to: Refill tyre pressure
Principles: The explain principles of: Refilling tyre
Theories: The explain: -
- Importance of Refilling tyres
- Effects of under inflation and over
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions while refilling
- Safe handling of tools and equipment
Swali
What is the first step in the procedure for refilling tyre pressure?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado