Mada za sehemu hiiPerforming boringMada 2
- Performing drilling
- Performing reaming
Performing Drilling
Drilling is a machining operation used to create a hole in a workpiece by using a drill bit. It is one of the most common operations performed on a lathe machine and is essential for producing holes that allow bolts, screws, or other fasteners to pass through metal components.
Before drilling a full-size hole, a centre drill (also called a countersink bit) is used to start the hole. This creates a small, guided opening that prevents the larger drill bit from deflecting or wandering offcentre during operation.
Drilling is widely used in many industries and applications:
- Manufacturing: Creating holes for bolts, screws, and other fasteners in metal components
- Automotive and aerospace industries: Producing holes for assembling vehicle and aircraft parts
- Construction: Installing fixtures, wiring, and plumbing components
- Mining and oil industries: Creating holes for extracting resources
- General fabrication: Making holes in metal, wood, plastic, and concrete for various purposes
The following tools and materials are needed to perform drilling on a lathe machine:
- Lathe machine with tailstock
- Drill chuck (fits into the tailstock)
- Centre drill bit
- Drill bits (various sizes)
- Chuck key
- Vernier caliper
- Measuring tape
- Mild steel rod (workpiece)
- Cutting fluid
- Safety gear: safety goggles, ear plugs, overcoat or overall, safety boots
- Working drawing
Follow these eight steps to perform drilling on a lathe machine:
-
Wear appropriate safety gear – Put on safety glasses, gloves, ear plugs, and protective clothing before starting.
-
Check the workpiece dimensions – Measure the raw workpiece using a vernier caliper and interpret the working drawing to understand the required hole size and position.
-
Secure the workpiece – Mount the workpiece onto the lathe chuck and tighten it firmly using the chuck key. Ensure it is properly centred.
-
Attach the drill chuck – Insert the drill chuck into the tailstock of the lathe and secure it in place.
-
Mount the centre drill – Insert the centre drill bit into the drilling chuck and tighten it firmly.
-
Position the tailstock – Switch on the lathe and slowly move the tailstock (with the centre drill) close to the workpiece.
-
Mark the starting point – Use the centre drill to create a small indentation at the exact hole position. This guides the larger drill bit.
-
Drill the hole – Remove the centre drill and replace it with a suitable drill bit of the required diameter. Apply cutting fluid to the drilling point and continue drilling until the desired hole depth is achieved.
A student needs to drill a 10 mm diameter hole through a mild steel rod of 20 mm diameter on the lathe machine.
Solution:
- First, mount the workpiece (20 mm rod) firmly in the three-jaw chuck.
- Attach the drill chuck to the tailstock.
- Insert a centre drill (e.g., 4 mm) into the chuck and tighten.
- Start the lathe at a suitable speed and bring the centre drill to the workpiece end.
- Create a centre spot to mark the exact hole position.
- Remove the centre drill and insert a 10 mm drill bit.
- Apply cutting fluid and drill through the workpiece.
- Measure the hole with the vernier caliper to confirm the 10 mm diameter.
- Always wear safety goggles to protect eyes from flying metal chips
- Wear ear plugs when operating the lathe machine
- Ensure the workpiece is firmly secured before starting
- Keep hands away from rotating parts
- Use cutting fluid to prevent overheating of the drill bit
- Switch off the machine before making adjustments
In Tanzania, drilling skills are essential for local mechanics and metalworkers who repair farming equipment such as water pumps, ploughs, and irrigation system components. For example, a mechanic in Morogoro may need to drill holes in metal brackets to attach new fasteners when repairing a generator or bicycle, enabling the equipment to function again for daily use.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Interpret drawings.
- Select tools and equipment.
- Perform boring.
- Deburr work piece.
- Observe safety precautions.
- Clean tools and equipment.
- Store tools and equipment.
Tathmini ya matokeo
Work piece drilled according to given technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: Students should explain how drilling is performed on lathe machine.
Principles: Students should explain the principle of:
- Holding work piece on lathe machine.
- Drilling work piece.
- Taking accurate measurements.
- Manual sharpening of cutting tools.
Theories: Students should explain:
- Important of drilling
- Procedure to follow when drilling
Circumstantial knowledge:
Detailed knowledge about:
- Safety requirements while drilling on lathe machine.
- Safe handling of work tools, equipment and work piece.
- Waste disposal.
Swali
What is the primary purpose of using a centre drill before drilling a full-size hole on a lathe machine?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado