Mada za sehemu hiiPerforming boringMada 2
- Performing drilling
- Performing reaming
Reaming is a machining process used to enlarge and finish holes to precise dimensions with a smooth surface finish. After a hole has been drilled or bored, it is often slightly undersized and has a rough surface. A reamer is a rotary cutting tool with multiple cutting edges that removes a small amount of material to achieve the exact required diameter and a high-quality finish. Reaming is commonly used in aerospace, automotive, and manufacturing industries where precision is critical.
Different reamer types are designed for specific applications and materials:
1. Spiral-Fluted Reamers
These reamers have helical flutes and are ideal for hard-chipping materials like stainless steel. The helical design distributes cutting forces evenly and helps evacuate chips, especially in blind holes.
2. Straight-Fluted Reamers
These have flutes parallel to the reamer's central axis. They work best with materials that produce minimal chips, such as brass and cast iron. They are suitable for through-holes where chips can fall through.
3. Taper Pin Reamers
These have a tapered body where the diameter decreases from root to tip. They are used to create holes for taper pins and are available in various sizes and taper angles.
4. Shell Reamers
Shell reamers consist of a sleeve with cutting flutes on the outside, fitted onto a reaming arbor. They are suitable for larger holes (typically greater than ¾ inch) and are more economical than other types.
5. Hand Reamers
Hand reamers are designed for manual operation rather than machine use. They feature helical flutes for chip evacuation and a slight taper for easy insertion. Hand reaming is less accurate than machine reaming but is commonly used in fabrication shops.
6. Floating Reamers
Floating reamers use a special holder with bearings that isolate the reamer from machine tool errors. This setup eliminates problems caused by spindle misalignment, thermal expansion, and axial offset.
Reamers serve several important purposes in machining:
- Precision sizing: They enlarge holes to exact diameters, ensuring dimensional accuracy after drilling.
- Improved surface finish: They create smooth, uniform surfaces inside holes.
- Better fastener fit: They ensure holes are correctly sized for bolts and screws.
- Accurate bearing holes: They produce precise holes for bearings and bushings.
- Cleaning up drilled holes: They remove irregularities and burrs left from drilling.
- Creating chamfers: Some reamers create beveled edges at hole entrances for easier component insertion.
Requirements
- Lathe machine with accessories
- Reamer (appropriate type for the job)
- Chuck or tailstock to hold the reamer
- Cutting fluid
- Vernier caliper or bore gauge for measurement
- Safety gear: safety glasses, gloves, cotton gloves, safety boots, overall, helmet
Procedure
Step 1: Preparation and Safety Wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and protective clothing. Ensure the work area is clean and well-lit, and the machine is in good working condition.
Step 2: Select the Appropriate Reamer Choose the correct type of reamer based on the material, hole size, and required surface finish. Ensure the reamer size matches the desired final diameter. Remember that the hole should already be drilled slightly undersized before reaming — typically about 0.2–0.3 mm smaller than the final size.
Step 3: Prepare the Workpiece Secure the workpiece properly using a chuck to prevent movement during reaming. Ensure the drilled hole is properly centered, clean, and free of burrs or debris.
Step 4: Align the Reamer Align the reamer perfectly straight with the drilled hole. Misalignment causes oversized or tapered holes. For machine reaming, align the reamer in the spindle or tailstock. For hand reaming, align it manually.
Step 5: Apply Cutting Fluid Apply cutting fluid to both the reamer and the hole to reduce friction, prevent overheating, and improve the surface finish.
Step 6: Ream the Hole For machine reaming, set the machine to a slower speed than drilling and feed steadily. Avoid excessive force. For hand reaming, turn the reamer clockwise in a continuous motion using a tap wrench. Never reverse direction while reaming, as this damages cutting edges.
Step 7: Complete the Process Continue reaming until the reamer passes through the hole or reaches desired depth. Withdraw the reamer slowly while it rotates to avoid leaving marks.
Step 8: Inspect the Hole Check the reamed hole for diameter accuracy, surface finish, and roundness using vernier calipers, micrometers, or bore gauges. Repeat if necessary.
Step 9: Deburr and Clean Remove any burrs or sharp edges around the hole. Clean the hole and workpiece to remove metal chips.
Step 10: Final Checks and Maintenance Clean the reamer, remove chips, and store properly. Perform routine machine maintenance.
A student has drilled an 8.0 mm diameter hole in a mild steel plate but needs a 10.0 mm hole for a 10 mm bolt. The student selects a 10.0 mm machine reamer. The hole is first drilled to 9.7 mm (slightly undersized), then reamed to exactly 10.0 mm using the procedure above. The reaming removes 0.15 mm from the radius, creating a smooth hole that fits the bolt precisely.
In Tanzania, reaming is used in workshops that repair agricultural machinery such as tractors and irrigation pumps. When a hole in a machine component becomes worn or damaged, a mechanic may drill it slightly undersized and then ream it to the correct size for a new bearing or bolt. For example, when repairing a maize milling machine at a local workshop in Arusha, a mechanic would ream holes to ensure bearings fit tightly, preventing vibration and extending the machine's life — important for small-scale farmers who depend on these machines for their livelihoods.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Interpret drawings.
- Select tools and equipment.
- Perform reaming
- Deburr work piece.
- Observe safety precautions.
- Clean tools and equipment.
- Store tools and equipment.
Tathmini ya matokeo
Work piece reamed according to. given technical specifications.
Tathmini ya maarifa
Knowledge evidence: Detailed knowledge of:
Method used: Students should explain how reaming is performed on lathe machine.
Principles: Students should explain the principle of:
- Reaming work piece.
Theories: Students should explain:
- Important of reaming
- Procedure to follow when reaming
- Importance of applying coolant when machining.
Circumstantial knowledge:
Detailed knowledge about:
- Safety requirements while reaming on lathe machine.
- Safe handling of work tools, equipment and work piece.
- Waste disposal.
Swali
What is the main purpose of reaming in machining operations?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado