Mada za sehemu hiiServicing animal draught implementsMada 4
- Lubricating implement
- Dismantling implements
- Assembling implements
- Repairing cats
Lubrication is the process of applying oil or grease to the moving parts of animal-drawn implements to reduce friction, prevent wear and tear, and protect against rust and corrosion.
Lubricants create a protective barrier between metal surfaces that rub against each other. Without lubrication, the metal parts wear out quickly, become stiff, and may seize up completely. In Tanzania's climate, where implements are exposed to dust, moisture, and high temperatures, regular lubrication extends the life of ploughs, harrows, carts, and other draught animal equipment.
Grease
Grease is a thick, semi-solid lubricant that sticks well to surfaces. It is ideal for:
- Bearings and joints that carry heavy loads
- Slow-moving parts that need long-lasting lubrication
- Dirty environments where oil would wash away
Grease is applied using a grease gun to fittings on the implement.
Oil
Oil is a liquid lubricant that flows easily into small spaces. It is best for:
- Chains and gears that move quickly
- Tight clearances that need penetration
- Parts requiring frequent lubrication
Oil is applied using an oil can or spray bottle.
The following components of draught animal implements require regular lubrication:
- Bearings and bushings – enable smooth rotation of wheels and joints
- Pivot points and hinges – allow parts to move freely without friction
- Axles and shafts – reduce wear from constant turning
- Gears and chains – prevent metal-on-metal contact
- Blades and cutting edges – benefit from light oil coating to prevent rust
Follow these eight steps to lubricate a draught animal implement properly:
Step 1: Gather Materials and Tools
Collect the required items before starting:
- Grease or oil (depending on the part)
- Grease gun or oil can
- Clean rags or cloths
- Wire brush or scraper
- Gloves and safety glasses
Step 2: Inspect the Implement
Check the implement for visible damage, rust, or dirt buildup. Identify all moving parts, joints, hinges, and areas where metal surfaces touch. Locate all points that need lubrication.
Step 3: Clean the Parts
Remove dirt, dust, old lubricant, and rust from the parts using a wire brush or scraper. Ensure surfaces are clean and dry before applying new lubricant. Contaminants mixed with fresh lubricant can cause more wear.
Step 4: Select the Appropriate Lubricant
Choose the correct type for the component:
- Grease for bearings, heavy-load parts, and slow-moving components
- Oil for chains, gears, fast-moving parts, and areas needing frequent lubrication
Consider the operating conditions such as temperature and moisture.
Step 5: Apply the Lubricant
For grease:
- Load the grease gun with appropriate grease
- Attach the nozzle to the grease fitting
- Pump until fresh grease appears at the edges
- Wipe off excess grease
For oil:
- Apply a few drops directly to chains, gears, or moving joints
- Ensure oil penetrates all tight spaces
- Spread evenly and wipe away excess
Step 6: Check Coverage
Operate the parts manually to ensure the lubricant spreads evenly. Listen for unusual noises or resistance that might indicate insufficient lubrication.
Step 7: Re-assemble and Test
If any parts were removed for cleaning, reassemble them according to the manufacturer's guidelines. Test the implement to ensure it moves smoothly without excessive friction or noise.
Step 8: Final Inspection
Check that all parts are properly lubricated with no leaks or missed points. Remove any remaining dirt or excess lubricant.
A mould board plough used in many Tanzanian farms has several points requiring lubrication. The wheel bearing needs grease applied with a grease gun. The pivot point where the plough frame connects to the beam requires oil to move freely when turning at the end of the field. After ploughing a field in Morogoro, a farmer should clean the plough, apply lubricant to these points, and check that the share and mould board are lightly oiled to prevent rust during storage.
A smallholder farmer in Mbeya who uses an ox-drawn mould board plough for preparing maize fields should regularly lubricate the wheel bearings and pivot points before each planting season. By spending about TSh 5,000 on grease and oil, the farmer can prevent costly repairs and ensure the plough works efficiently throughout the season, saving time and labor when preparing their shamba.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Interpret drawings.
- Select tools and materials.
- Conduct inspection of implements.
- Perform Lubrication implement
- Observe safety.
- Clean tools, equipment and work place.
- Store tools and equipment.
Tathmini ya matokeo
Draught animal implements lubricated conform to technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: Students should explain how to:
- Perform lubrication of implement.
Principles: Students should explain the principle of:
- Perform lubrication of implement.
Theories: Students should explain:
- Draught animal implements.
- Different types of animal drawn implements.
- Explain the use of each implements
- Adjustments required for each implement.
- Farm operation done by draught animals implements
- Perform lubrication of implement
- How to use draught animal.
Circumstantial knowledge:
Detailed knowledge about:
- Safety requirements while perform lubrication of implement of draught animal implements.
- Safe handling of working tools and equipment.
- Waste disposal.
Swali
What is the main purpose of lubricating animal draught implements?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado