Mada za sehemu hiiServicing animal draught plantersMada 3
- Servicing end wheel planter
- Servicing press wheel planters
- Carrying out relevant adjustments on planters
Proper adjustments and calibrations ensure that a planter works correctly and plants seeds at the right depth, spacing, and rate. When a planter is well-adjusted, farmers get uniform crop emergence, better yields, and avoid wasting seeds. This section covers the key adjustments every agro-mechanic must know how to make on animal-drawn planters.
The purpose of seed depth adjustment is to plant seeds at the correct depth for good germination. Different crops need different planting depths — for example, maize seeds should be planted about 1–2 inches (2.5–5 cm) deep.
How to adjust seed depth:
- Use the manual depth control mechanism found on most planters. This mechanism adjusts how deep the furrow openers cut into the soil.
- Use depth stops or adjustable linkages on the row units to set the desired depth.
- After planting, check the actual depth using a soil probe or ruler. If seeds are too shallow or too deep, adjust the settings again.
Row spacing adjustment ensures proper distance between rows. This helps crops get enough sunlight, nutrients, and water, and makes field management tasks like weeding easier.
How to adjust row spacing:
- Reposition the row units on the planter frame to change the distance between them. Some planters have adjustable spacing mechanisms.
- After planting, measure the distance between rows in the field. If spacing is uneven, adjust the row units again.
Seed rate adjustment controls how many seeds are planted per unit area. The correct seed rate achieves the desired plant population without overcrowding or wasting seeds.
How to adjust seed rate:
- Change the settings on the seed metering mechanism. This may involve switching seed plates or discs, or adjusting gears or dials that control seed flow.
- Calibrate the planter to verify the seed rate. Collect seeds dispensed over a known distance and count them. Compare the actual rate with the desired rate, then adjust the metering mechanism accordingly.
Press wheel adjustment ensures that press wheels apply the right amount of pressure to compact soil over planted seeds. Good soil-to-seed contact helps moisture reach the seed and improves germination.
How to adjust press wheels:
- Use adjustment bolts or hydraulic controls to change the pressure settings on the press wheels. Higher pressure compacts soil more firmly.
- Check that press wheels are properly aligned with the furrow and make even contact with the soil. Misaligned wheels can cause uneven compaction.
Furrow openers create the trench where seeds are placed. Adjusting them ensures the trench is the right size and shape for the specific crop and soil conditions.
How to adjust furrow openers:
- Use depth stops or angle adjustments on the row units to change how deep and at what angle the openers cut into the soil.
- In loose, sandy soil, openers may need to cut deeper to create a stable trench. In heavier clay soil, a shallower angle may work better.
Seed metering calibration confirms that the planter delivers the correct number of seeds per unit area. This is essential for achieving the target plant population.
Steps to calibrate the seed metering system:
- Measure seeds dispensed — Drive the planter over a known distance (such as 10 meters) while collecting seeds from one row unit in a container. Count the seeds collected.
- Compare with desired rate — Calculate the expected number of seeds for that distance based on the recommended seed rate. If the collected number is higher or lower, adjustment is needed.
- Adjust the mechanism — Change seed plates, discs, or settings on the metering system to increase or decrease seed flow. Repeat the test until the actual rate matches the desired rate.
After making adjustments, test the planter to ensure seeds are actually placed at the correct depth and spacing.
How to check accuracy:
- Conduct a planting test in a small area of the field.
- Dig up several seeds and measure the depth using a ruler or soil probe.
- Measure the distance between adjacent seeds in a row.
- Compare measurements with the intended settings. If there are errors, adjust seed depth, spacing, or metering settings and test again.
If the planter has a fertiliser hopper, calibrate it to apply the correct amount of fertiliser along with seeds.
How to calibrate fertiliser application:
- Collect fertiliser dispensed over a known distance or time period.
- Weigh the collected fertiliser and compare with the recommended application rate.
- Adjust the fertiliser metering system to increase or decrease flow until the applied rate matches the recommendation.
Field conditions such as soil type, moisture content, and terrain affect how a planter performs. Always check and adjust the planter when moving to a new field or when conditions change.
What to check:
- Test seed placement, depth, and spacing in the actual field conditions.
- In dry, hard soil, furrow openers may need deeper adjustment.
- In wet, soft soil, reduce pressure on press wheels to prevent over-compaction.
- Make incremental adjustments and re-test until performance is satisfactory.
A farmer wants to plant maize at a rate of 25 kg per acre. Using a planter with 4 row units, you need to verify that each row unit plants the correct amount of seed.
- You collect seeds from one row unit over a 10-meter test run and count 85 seeds.
- The spacing between rows is 75 cm (0.75 m). The area covered by 10 meters of one row is: 10 m × 0.75 m = 7.5 m².
- You calculate that the seed rate is too low. You adjust the seed plate to a larger opening and repeat the test.
- On the second test, you collect 110 seeds over the same distance. This is closer to the target. You make a small final adjustment and confirm the rate is now correct.
In Tanzania, small-scale farmers in regions like Morogoro or Shinyanga often use animal-drawn planters for planting maize, beans, and sunflower. If a farmer notices uneven emergence in their field — some plants are coming up too shallow and others too deep — they can apply the seed depth adjustment procedure described above to correct the problem. This saves the farmer from buying more seeds to replant failed areas and helps ensure a better harvest that can be sold at local markets like the Morogoro town market to earn income.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Select tools and materials.
- Inspect the planter.
- Perform final adjustments.
- Observe safety precautions.
- Test the planter.
- Clean tools, equipment and work place
- Store tools and planter.
Tathmini ya matokeo
Draught animal planter adjusted as per technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: Students should explain how to:
- Adjust gear system on end and press wheel planter
Principles: Students should explain the principle of:
- Adjust gear system on end and press wheel planter
Theories: Students should:
- Important of Carry out relevant adjustments on planters
- Procedure for Carry out relevant adjustments on planters
Circumstantial knowledge:
Detailed knowledge about:
- Safety requirements while Important of Carry out relevant adjustments on planters
- Safe handling of working tools and equipment.
- Waste disposal.
Swali
What is the main purpose of adjusting seed depth on an animal-drawn planter?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado