Mada za sehemu hiiServicing forage harvestersMada 3
- Servicing reciprocating (cutter bar) mower/racers
- Servicing rotary mower / racers
- Carrying out relevant adjustment
A reciprocating mower, also called a cutter bar mower, is a machine used for cutting grass, weeds, or crops in large areas such as pastures, fields, and hay farms. Its main feature is a blade mechanism that moves back and forth (reciprocating motion) to cut vegetation in a scissor-like action. This type of mower is commonly attached to or pulled by a tractor.
The reciprocating mower uses a series of blades mounted on a long horizontal bar called the cutter bar. The bar moves back and forth through a mechanical linkage connected to the tractor's engine or motor. As the blades move reciprocally, they slice through grass and vegetation efficiently. The blades are sharp and designed to cut cleanly through the material.
Reciprocating cutter bars are used for:
- Grass mowing — cutting large areas of grass in pastures and fields
- Hay cutting — cutting hay crops before drying and baling
- weed control — managing weeds and overgrown vegetation
- Efficiency — handles tough and dense vegetation effectively
- Durability — built to withstand heavy use in rugged conditions
- Versatility — usable from small lawns to large fields
- Pull-behind mowers — towed by a tractor or vehicle
- Mounted mowers — attached directly to a tractor and operated from the tractor's controls
| Part | Function |
|---|---|
| Cutter bar | Long horizontal bar that houses the blades; moves back and forth |
| Blades | Cut the grass as the bar moves; may be straight or serrated |
| Pitman arm | Connects crankshaft to cutter bar; converts rotational to reciprocating motion |
| Crankshaft | Provides the rotating motion for reciprocating action |
| Gear mechanism | Transfers rotational motion to reciprocating motion |
| Guard | Protective cover shielding blades and moving parts |
| Drive belt/chain | Transmits power from engine to crankshaft |
| Adjusters | Set cutting height and blade tension |
- Blade dullness — reduces cutting efficiency
- Jamming — debris clogs the mechanism
- Alignment issues — causes uneven cutting
- Wear and tear — moving parts require regular inspection
- Overheating — from prolonged use in dense or wet conditions
- Safety concerns — moving parts pose risks if not properly maintained
Follow these nine steps to service a reciprocating mower:
Step 1: Safety First
Disconnect the mower from electricity or fuel source before starting any maintenance. Wear protective gear including gloves, safety glasses, safety boots, and overalls.
Step 2: Cleaning
Clear grass, dirt, and debris from the mower deck, cutter bar, and around the engine. Use a brush or compressed air to clean blades and moving parts. Avoid using high-pressure water on electrical components.
Step 3: Inspecting Damaged Parts
Check for wear or damage. Ensure blades are sharp and properly aligned. Sharpen or replace dull blades. Inspect the cutter bar for cracks or damage. Check that it is securely mounted and moves freely. Examine belts and cables for wear or fraying. Replace any damaged parts.
Step 4: Lubricating Moving Parts
Apply appropriate lubricant to the cutter bar's moving parts. Use the grease gun to grease bearings. Check the owner's manual for recommended lubricant types and amounts. Lubrication reduces friction and wear.
Step 5: Adjusting the Parts
Ensure the cutter bar has proper tension — not too tight nor too loose. Adjust according to manufacturer specifications. Ensure blades are correctly aligned with the cutter bar to prevent uneven cutting and increased wear.
Step 6: Checking Fluids
If the mower has an engine with oil, check the oil level and condition. Change the oil if dirty or if long time has passed. For gas-powered mowers, ensure the fuel is fresh. Old or contaminated fuel causes performance problems.
Step 7: Tightening Fasteners
Check and tighten all bolts, screws, and fasteners. Vibration during operation can loosen them over time.
Step 8: Testing
Start the mower and let it run for a few minutes. Listen for unusual noises and check for smooth operation.
Step 9: Storage
Store the mower in a dry, clean area to prevent rust and damage. If storing for extended period, drain the fuel or use a fuel stabilizer.
- Wrench set
- Pliers
- Sharpening file or grinder
- Grease gun
- Lubricating oil
- Replacement blades or guards
- Cleaning brush
- Safety gear (gloves, goggles, boots, overalls)
In Tanzania, small-scale farmers in regions like Morogoro or Manyara who grow hay for their livestock can use reciprocating mowers to cut grass efficiently during the dry season. After harvesting, they can service the mower by cleaning debris, sharpening blades, and lubricating moving parts to ensure it works properly when preparing feed for their cattle or goats, which helps maintain animal health and reduces manual labor.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Select tools, equipment and safety gears.
- Perform Servicing of reciprocating (Cutter bar) mower/rac ers.
- Observe safety precautions.
- Test forage harvesters.
- Clean tools and equipment.
- Store tools and equipment.
Tathmini ya matokeo
A serviced reciprocating (Cutter bar) mower/racer conforms to technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: Students should explain reciprocating (Cutter bar) mower/racer dismantling and servicing.
Principles: Students should explain the principle of:
- Dismantling and reciprocating (Cutter bar) mower/racer
- Lubrication
- Connecting to P.T.O.
Theories: Students should explain:
- Types of reciprocating (Cutter bar) mower/racer
- Components of reciprocating (Cutter bar) mower/racer
- Angular motion characteristics / linear motion.
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions while performing the task.
- Safe handling of working tools and equipment.
- Waste disposal.
Swali
What is the very first step to follow when servicing a reciprocating (cutter bar) mower?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado