Mada za sehemu hiiPerforming resistance weldingMada 1
- Performing resistance welding
Performing Resistance Welding
Resistance welding is a technique of joining two metals together by generating heat through the electrical resistance at the junction of the metals. The ends of the metal to be joined are heated to a plastic or molten state at the point of contact, then pressed together under intense mechanical pressure to fuse them into a single unit.
This process is widely used in manufacturing because it is fast, produces strong joints, and does not require filler materials.
The heat generated during resistance welding follows the formula:
H=I2R×t
Where:
- H = heat generated (joules)
- I = current flowing through the electrodes (amperes)
- R = contact resistance at the interface (ohms)
- t = time the current flows (seconds)
The process works because when electric current passes through two metal pieces pressed together, the resistance at the contact point converts electrical energy into heat. This heat melts the metals at the junction, and the pressure fuses them together.
How It Works
- The metal components are positioned between two electrode tips
- The electrodes apply pressure to hold the parts firmly in place
- An electric current passes through the workpieces via the electrodes
- Resistance at the contact point generates heat (Joule heating effect)
- The heat causes the metal to soften and melt
- Pressure fuses the molten metals into one solid piece
Spot Welding
Spot welding joins two thin metal sheets by applying pressure and heat at specific points. The electrodes concentrate current at the contact points, melting the interface and fusing the sheets together. This is commonly used in automotive body construction and appliance manufacturing.
Seam Welding
Seam welding uses roller electrodes instead of pointed electrodes to produce a continuous series of spot welds, creating a watertight seam. It is used for joining edges of sheets to form tanks or containers.
Projection Welding
Projection welding uses raised protrusions (projections) on one of the workpieces to concentrate the current and heat at specific points. The projections collapse under pressure during welding, creating strong joints at predetermined locations.
Butt Welding
Butt welding joins the ends of two metal pieces together by applying heat and pressure along the meeting surfaces. This is commonly used for joining rods, bars, and pipe sections.
Flash Welding
Flash welding involves bringing two workpieces close together while current flows, creating sparks (flashing) that heat the surfaces. The pieces are then quickly forced together to form a forge weld.
Resistance Upset Welding
This process joins two cylindrical parts end-to-end by heating the ends with resistance current while applying axial pressure to upset (compress) the heated metal.
- Resistance welding machine
- Copper electrodes
- Electrode alignment tools
- Surface cleaning tools (wire brushes, grinders)
- Workbench
- Measuring and marking tools
- Personal Protective Equipment (PPE)
Safety Gear
- Welding shield
- Leather gloves
- Leather apron
- Safety boots
- Safety clear glasses
- Overall
- Helmet
-
Clean the surfaces — Use a wire brush or grinder to clean metal surfaces. Proper cleaning ensures good electrical contact and accurate welding.
-
Set up the machine — Install clean, properly aligned electrodes on the resistance welding machine.
-
Adjust parameters — Set the welding current, time, electrode force, and hold time according to the material type and thickness being welded.
-
Position workpieces — Place the metal pieces between the electrodes, ensuring they are properly aligned.
-
Apply pressure and initiate current — Press the workpieces together and activate the welding current. Hold the pressure briefly after the current stops to allow the weld to solidify.
-
Inspect the weld — Check the weld visually for quality. The weld should show proper fusion without cracks or excessive discoloration.
-
Clean electrodes — Regular cleaning of electrodes maintains good electrical conductivity and weld quality.
If a resistance welding machine uses a current of 5,000 amperes (I = 5000 A), the contact resistance is 0.0003 ohms (R = 0.0003 Ω), and the welding time is 0.01 seconds (t = 0.01 s), the heat generated is:
H=(5000)2×0.0003×0.01 H=25,000,000×0.0003×0.01 H=750 joules
This heat is sufficient to melt the metal at the contact point and create a strong weld joint.
- Fast and automated process
- No filler material needed
- Produces strong, consistent joints
- No visible smoke or flames
- Economical for mass production
- Localized heat minimises distortion
- Automotive industry (car body panels)
- Manufacturing of appliances (refrigerators, washing machines)
- Construction of metal containers and tanks
- Electrical equipment assembly
In Tanzania, resistance welding (particularly spot welding) is used in local workshops that repair vehicle bodies and manufacture metal doors, windows, and gates. For example, a small welding workshop in Mwanza repairing truck bodies would use spot welding to join thin sheet metal panels efficiently, creating strong joints without needing additional filler materials — saving time and money while producing durable repairs for local customers.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Interpret working drawings.
- Select tools and equipment
- Perform resistance welding process.
- Observe safety precautions.
- Clean tools, equipment, work piece and work place.
- Store tools and equipment.
Tathmini ya matokeo
Resistance welded parts conform to technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: Students should explain how resistance welding is performed
Principles: Students should explain the principle of:
- Operation of resistance welding equipment.
- Resistance welding.
- Aligning equidistantly copper electrodes to work pieces on chucks.
Theories: Students should explain:
- Main parts of resistance welding equipment and their functions.
- Importance of setting suitable current and time according to plate thickness.
- Meaning of hold time, squeeze time and off period time.
- Requirements of resistance welding electrodes.
- Resistance welding variables.
- Selection of resistance welding process.
- Joint design.
- Metallurgical effects on welded joint.
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions while performing resistance welding
- Safe handling of work tool, equipment and work place.
- Waste disposal.
Swali
What is the principle of resistance welding?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado