Mada za sehemu hiiPerforming maintenance of tillage machineryMada 6
Primary tillage implements such as mouldboard ploughs, disc ploughs, chisel ploughs, and subsoilers are the first machines used to break and loosen soil before planting. Regular servicing keeps these implements working effectively, reduces fuel consumption, prevents field breakdowns, and extends the life of expensive equipment. Without proper maintenance, worn blades and loose parts cause poor soil penetration, uneven seedbeds, and higher repair costs.
Before starting any servicing work, gather all the necessary tools and safety gear:
- Spanner set and socket set
- Adjustable wrench and pliers
- Grease gun and oil can
- Hammer, wire brush, and scraper
- Sharpening file
- Torque wrench
- Hydraulic hose connectors
- Safety goggles, gloves, boots, and overall
Always wear personal protective equipment (PPE) before handling tools or working on implements.
Step 1: Clean the Implement
Use a wire brush and scraper to remove all soil, debris, rust, and old plant material from the implement. Pay special attention to the blades, disc edges, and joints where dirt accumulates. Cleaning reveals hidden cracks, excessive wear, and loose parts that cannot be seen when the implement is dirty.
Step 2: Inspect for Damage and Wear
After cleaning, carefully inspect every component:
- Check the ploughshares, disc blades, or chisel points for cracks, excessive wear, or bending
- Look for worn or damaged frame members, hitch points, and pivot arms
- Examine all bolts, nuts, and pins for tightness
- Identify any hydraulic hoses with cracks, leaks, or damaged connectors
Step 3: Tighten Loose Fasteners and Sharpen Cutting Parts
Use spanners, socket sets, and a torque wrench to tighten all loose bolts and nuts. Ensure proper alignment of parts according to the manufacturer's specifications. Inspect the cutting edges of ploughshares and disc blades—dull edges reduce cutting ability and increase tractor workload. Use a sharpening file to restore sharp edges when necessary.
Step 4: Lubricate Moving Parts
Apply grease using a grease gun to all moving joints, pivot points, bearings, and bushings. Lubrication reduces friction, prevents premature wear, and protects against rust. Ensure each grease point receives the correct amount of lubricant as specified in the service manual.
Step 5: Inspect Hydraulic System
Examine all hydraulic hoses, fittings, and connectors for damage, leaks, or wear. Replace any damaged hoses or connectors to prevent hydraulic fluid loss during field operation. Check that hydraulic connections are secure and properly tightened.
Step 6: Reassemble and Test
After completing all maintenance tasks, reassemble any removed parts securely. Check that all components are properly aligned and fasteners are tightened to the correct torque specifications. Finally, conduct a test run at low speed before full field operation to ensure everything functions correctly.
A Form 3 student servicing a mouldboard plough follows this sequence:
-
Cleaning: The student uses a wire brush to remove hardened soil from the mouldboard and ploughshare, then scrapes rust from the leg assembly.
-
Inspection: The student finds one loose bolt on the landside panel and discovers the ploughshare is worn beyond the recommended width.
-
Tightening and sharpening: The student tightens the loose bolt using a spanner and files the worn ploughshare to restore its cutting edge.
-
Lubrication: The student applies grease to the frog pivot, crossbolt, and share point pivot using a grease gun.
-
Hydraulic check: The student inspects the hydraulic lift hose and finds no leaks or damage.
-
Testing: The student reconnects the plough to the tractor, performs a low-speed test in the school compound, and confirms the plough lifts and lowers smoothly.
| Implement | Key Parts to Service |
|---|---|
| Mouldboard plough | Ploughshare, mouldboard, landside, frog,joi pints |
| Disc plough | Disc blades, scrapers, hubs, bearings |
| Chisel plough | Chisel points, shanks, springs, pivot points |
| Subsoiler | Subsoiler points, shanks, frame, lift system |
- Always clean the implement before inspection to avoid missing hidden problems
- Replace worn or damaged parts rather than attempting temporary repairs
- Follow the torque specifications in the service manual to avoid overtightening or loosening
- Store the implement in a dry, sheltered area after servicing to prevent rust
- Keep a record of all servicing activities including date, parts replaced, and observations
A smallholder farmer in Morogoro who owns a mouldboard plough can apply these servicing skills before the planting season begins. By regularly cleaning, sharpening the ploughshare, greasing the joints, and checking for loose bolts, the farmer reduces ploughing time, saves fuel, and avoids expensive breakdowns during critical planting periods—translating directly to better yields and higher income from the harvest.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Interpret drawings.
- Select tools and equipment.
- Conduct inspection on tillage machines.
- Service primary tillage implements.
- Perform relevant adjustments on tillage machines.
- Observe safety precautions.
- Clean tools, equipment and work place.
- Store tools and equipment’s.
Tathmini ya matokeo
Serviced primary tillage machines conform to technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: Students should explain how to:
- Conduct adjustments on tillage machine.
Principles: Students should explain the principle of:
- Servicing different implements.
Theories: Students should explain:
- Identify primary tillage implements
- Functions of primary tillage implements
- Repair of different tillage implements
- Replace worn out parts.
- Service different tillage machines.
Circumstantial knowledge: Detailed knowledge about:
- Safety precautions while servicing primary tillage machinery.
- Safe handling of working tools and equipment.
- Waste disposal.
Swali
Why is regular servicing of primary tillage implements important?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado