Mada za sehemu hiiPerforming filingMada 3
- Performing flat filing
- Performing radii filing
- Performing angle filing
Performing Angle Filing
Angle filing is a bench work process that involves removing excess material from a workpiece to create precise angles or corners using a file — a handheld tool with abrasive teeth. This skill is essential for shaping metal parts used in agricultural equipment repair and fabrication.
Angle filing is the process of manually scraping a workpiece with a file to create specific angles or corners. Unlike flat filing, which produces flat surfaces, angle filing is used to form V-shaped grooves, chamfers, and internal angles. The file's abrasive teeth cut into the metal, gradually removing material until the desired angle is achieved according to technical drawings.
Tools and equipment required:
- Work bench
- Angle file (triangular or three-square file is commonly used)
- Bench vice
- Try square
- Steel rule
- Scriber
- Marker or pencil
Materials:
- Workpiece (metal to be filed, e.g., mild steel flat bar)
- Cotton waste (for cleaning)
Safety gears (PPE):
- Safety boots
- Overall (protective clothing)
- Leather gloves
- Safety goggles
Follow these steps in order to perform angle filing correctly:
-
Wear PPE — Put on safety boots, overall, gloves, and safety goggles before starting.
-
Interpret the drawing — Read the technical drawing to understand the required angle, dimensions, and tolerances.
-
Mark the angle — Use a scriber and steel rule to mark the angle on the workpiece. A try square can help transfer accurate lines.
-
Select the right file — Choose an appropriate file for the angle. A triangular (three-square) file is ideal for internal angles, while a flat file works for chamfers.
-
Clamp the workpiece — Secure the workpiece firmly in the bench vice, ensuring the marked area is accessible and elevated above the vice jaws.
-
Perform angle filing — Hold the file firmly with both hands. Push the file forward along the marked angle line, applying even pressure. Lift the file on the return stroke. Work gradually to avoid removing too much material.
-
Check angle according to drawing — Use a try square or protractor to check if the filed angle matches the specification. File further if necessary.
-
Clean the tools and return to store — Use a file card to clean the file, wipe the workpiece with cotton waste, and return all tools to their proper storage.
A student is given a mild steel workpiece measuring 150mm × 50mm × 12mm and asked to create a V-shaped angle (a 60-degree V-groove) on one end.
Procedure followed:
- The student first puts on PPE and studies the drawing showing a 60° angle.
- Using a scriber and steel rule, the student marks two lines forming a 60° angle on the workpiece.
- The workpiece is clamped securely in the vice.
- A triangular file is selected and used to file between the two marked lines.
- After each few strokes, the student checks the angle with a protractor.
- When the angle matches 60°, the student cleans the workpiece and stores the file.
Proper file maintenance ensures long life and effective cutting:
- Cleaning: Remove metal filings from the file teeth using a file card or wire brush after each use.
- Storage: Store files in a dry place to prevent rusting. Use a file rack or drawer.
- Handling: Always handle files with clean hands; oil from skin causes the file to slide instead of cutting.
- Inspection: Check files regularly for wear, damage, or dull teeth. Replace when necessary.
- Rust removal: If rust appears, use a wire brush to remove it, then apply a rust inhibitor.
- Never use a file without a proper handle — the tang can cause serious injury.
- Use a file card to clean the file, not your hands — metal chips can cause infection.
- Do not use files as hammers — they may shatter and cause injury.
- Wear safety goggles when cleaning files to protect eyes from flying metal particles.
In Tanzanian agro-mechanics workshops, angle filing is used when repairing or fabricating farm equipment such as plow shares, harrow tines, and mower blades. For example, a farmer in Morogoro may need to sharpen a worn-out plow share by filing a precise angle on the cutting edge, ensuring the tool works efficiently during plowing season and reduces the cost of buying new equipment.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Interpret technical drawings.
- Select tools and equipment
- Take measurements and marking.
- File work piece.
- Grind work piece.
- Check for accuracy.
- Observe safety precautions
- Clean tools, work piece and work place.
- Store tools, equipment and work piece.
Tathmini ya matokeo
Filed work piece conforms to technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: Students should explain how to:
- Mark work piece.
- File work piece.
- Grind work piece.
Principles: Students should explain the principles of:
- Filing and grinding work piece.
Theories: Students should:
- Explain procedures for performing angle filing
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions pertaining to filling/grinding.
- Safe handling of working tools and equipment.
- Waste disposal.
Swali
What is angle filing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado