Mada za sehemu hiiHandling fire accidentsMada 3
- Performing fire classification
- Performing firefighting
- Performing fire protection
Fire Classification
Fire classification is the process of categorizing fires based on the type of material that is burning. Knowing the correct class of fire helps you choose the right firefighting equipment and respond safely to fire accidents. In a solar power installation workplace, fires can start from electrical equipment, flammable liquids, or ordinary materials, so understanding fire classification is essential for every technician.

Fires are classified into five main classes, each identified by a letter and a specific type of burning material. Each class requires a different approach to extinguish safely.
Class A Fires
Class A fires involve ordinary combustible materials such as wood, paper, cardboard, cloth, trash, and other organic materials that leave ash when burned.
These fires are common in workshops where wood, paper documentation, or packaging materials are present. Class A fires are usually put out using water, foam, or dry chemical extinguishers.
Class B Fires
Class B fires involve flammable liquids and gases such as gasoline, diesel fuel, oil, grease, paint, solvents, and propane.
In solar power installation, Class B fires can occur when handling fuel for generators, cleaning solvents, or oil from equipment. These fires should never be extinguished with water, as water can spread the flames. Use foam, dry chemical, or carbon dioxide extinguishers instead.
Class C Fires
Class C fires involve electrical equipment that is energized, such as wiring, circuit breakers, outlets, solar panels, inverters, transformers, and motors.
Since the electricity makes water dangerous, Class C fires require non-conductive extinguishing agents like dry chemical or carbon dioxide. Always disconnect the power source before attempting to extinguish an electrical fire if it is safe to do so.
Class D Fires
Class D fires involve combustible metals such as magnesium, titanium, aluminum, sodium, and potassium.
These fires are less common in typical solar installation work but can occur when working with metal components or batteries. Special dry powder extinguishers designed for specific metals are required.
Class K Fires
Class K fires involve cooking oils and fats, typically found in kitchen areas. While less common in solar installation workplaces, Class K fires may occur in mess or cooking areas at remote installation sites.
Scenario: During a solar panel installation at a workshop in Arusha, a technician accidentally knocks over a container of diesel fuel near a running generator. The fuel catches fire.
Question: What class of fire is this, and what fire extinguisher should be used?
Answer: This is a Class B fire because it involves flammable liquid (diesel fuel). The technician should use a foam extinguisher or dry chemical extinguisher. Water should NOT be used because it will spread the burning fuel and make the fire worse.
In Tanzania, fire extinguishers are colour-coded to help identify their contents:
| Colour | Type of Extinguisher |
|---|---|
| Red | Water |
| Cream | Foam |
| Blue | Dry powder |
| Black | Carbon dioxide (CO₂) |
| Yellow | Wet chemical |
Using the wrong extinguisher on a fire can be dangerous and make the situation worse. The table below shows which extinguishers are safe for each fire class:
| Fire Class | Suitable Extinguisher |
|---|---|
| Class A | Water, Foam, Dry powder |
| Class B | Foam, Dry powder, CO₂ |
| Class C | Dry powder, CO₂ |
| Class D | Special dry powder (for specific metals) |
| Class K | Wet chemical |
- Alert others – Raise the alarm immediately
- Evacuate – Leave the area if the fire is too large
- Use the correct extinguisher – Match the extinguisher to the fire class
- Stay low – Smoke rises, so stay below it
- Know your exit routes – Plan escape routes before fire occurs
- Call the fire brigade – Report all fires to emergency services
Fire classification helps technicians respond correctly to fire emergencies. Class A covers ordinary combustibles, Class B covers flammable liquids, Class C covers electrical fires, Class D covers metal fires, and Class K covers cooking oils. Always match the extinguisher type to the fire class, and never use water on electrical or flammable liquid fires.
In Tanzania, a solar technician working in Mbeya might encounter a Class B fire when refueling a backup generator at a rural health clinic. Knowing that diesel fuel fires require foam or dry chemical extinguishers—not water—could prevent the fire from spreading and protect the solar installation equipment worth millions of shillings. This knowledge is also tested in the TIE examination for Trade Grade A in Solar Power Installation.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Identify classes of fire
Tathmini ya matokeo
Fire accident is handled as per rules and regulations.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The students should be able to explain how to perform fire classification
Principles: The students should explain how to perform fire classification
Theories: The students should discuss: -
- Causes of fire
- Classification of fire
- Responsible authorities
Swali
What does fire classification mean?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado