Mada za sehemu hiiDesigning PV solar power systemMada 2
- Designing of solar PV DC system
- Designing solar PV AC system
Designing of Solar PV DC Systems
A solar PV DC system is designed by calculating the size of each component — solar panels, batteries, and charge controller — to meet the daily energy needs of the loads. This process ensures that the system operates efficiently and provides power even when sunlight is not available, such as at night or during cloudy days.
The first step in designing a solar PV system is to find out how much electrical energy the appliances will use in one day. This is calculated using the formula:
Energy (Wh)=Power (W)×Time (h)
Worked Example 5.1: Load Analysis
A small household in Arusha uses the following appliances:
| Appliance | Quantity | Power (W) | Hours per Day | Daily Energy (Wh) |
|---|---|---|---|---|
| LED Bulb | 3 | 10 | 6 | 180 |
| Radio | 1 | 15 | 4 | 60 |
| Phone Charging | 2 | 5 | 3 | 30 |
| Total | 270 Wh/day |
Therefore, the household requires 270 Wh of energy per day.
In practice, solar PV systems experience losses due to dust on panels, wiring resistance, panel mismatch, and inefficiencies in components. These losses are approximately 30%. To account for them, multiply the total energy by 1.3:
Energy required (Wh)=Total energy (Wh)×1.3
From the example above:
Energy required=270×1.3=351 Wh/day
To find the total wattage of solar panels needed, use the formula:
PVsize(Wp)=Peak Sun Hours (PSH)Energy required (Wh)
Peak Sun Hours (PSH) is the average number of hours per day when solar radiation reaches 1,000 W/m². In Tanzania, PSH typically ranges from 4 to 6 hours. Let us assume 5 PSH for this example.
From the worked example:
PVsize=5 h351 Wh=70.2 Wp
If available panels are 50 Wp each, then:
Number of panels=5070.2=1.4≈2 panels
Therefore, the system needs 2 panels of 50 Wp each.
Batteries store energy for use when there is no sunlight. Battery size depends on:
- Energy required per day
- Days of autonomy (number of days the system can operate without sunlight, usually 2–3 days)
- System voltage (12V, 24V, or 48V)
- Depth of Discharge (DoD) — the percentage of battery capacity that can be safely used
- Battery efficiency (typically 85% for lead-acid)
The formula for battery capacity is:
Capacity (Ah)=Voltage (V)×Efficiency×DoDEnergy (Wh)×Days of autonomy
Using the example above, with 2 days of autonomy, 12V system, 85% efficiency, and 50% DoD:
Capacity=12×0.85×0.5351×2=5.1702=137.65 Ah
A battery of 150 Ah at 12V would be suitable for this system.
A charge controller regulates the current from solar panels to the batteries, preventing overcharging. It is rated by the maximum current it can handle.
The formula is:
Icontroller=System voltagePVsize×1.25
The 1.25 is a safety factor to account for high solar irradiance conditions.
From our example, with 2 panels of 50 Wp (total 100 Wp) and 12V system:
Icontroller=12100×1.25=10.42 A
A 15A charge controller would be appropriate.
| Component | Size/Quantity |
|---|---|
| Daily energy consumption | 270 Wh |
| Energy required (with losses) | 351 Wh |
| Solar PV panels | 2 × 50 Wp |
| Battery bank | 150 Ah, 12V |
| Charge controller | 15A |
- Peak Sun Hours (PSH): Average hours of strong sunlight per day
- Days of autonomy: Number of days the battery can supply power without charging
- Depth of Discharge (DoD): Percentage of battery capacity that can be used
- Wp (Watt-peak): Maximum power output of a solar panel under standard test conditions
In Tanzania, a small shop owner in Mwanza can use this sizing method to design a solar PV system for lighting and charging mobile phones. For example, if the shop needs 500 Wh per day, the owner can calculate that about 130 Wp of panels, a 120 Ah battery, and a 15A charge controller are needed — avoiding overspending on unnecessarily large components while ensuring the system runs reliably throughout the night when the grid is unavailable.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to explain how to:
- Estimate load requirement
- Size solar
- Size charge controller
- Size batteries
- Draw solar PV wiring system
Tathmini ya matokeo
PV solar power system is designed as per requirement
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The students should explain how to: Design PV solar power system
Principles: The students should explain steps to design the solar PV DC system Theory: The students should explain:
- Solar PV DC system components
- Principles of load calculation
Swali
What is the formula for calculating daily energy consumption in a solar PV system?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado