Mada za sehemu hiiDesigning PV solar power systemMada 2
- Designing of solar PV DC system
- Designing solar PV AC system
Designing a Solar PV AC System
A solar PV AC system supplies alternating current (AC) power to run household appliances like lights, fans, and televisions. To design such a system, you must correctly size all major components so that the system meets the daily energy needs of the home.
The first step is to find out how much electrical energy your home uses each day. List all appliances, their power ratings, and how many hours they are used per day.
Formula:
Energy (Wh)=Power (W)×Time (h)
Worked Example 1:
A household has the following appliances:
| Appliance | Power (W) | Quantity | Hours per Day | Daily Energy (Wh) |
|---|---|---|---|---|
| LED Bulb | 10 | 5 | 6 | 300 |
| Television | 100 | 1 | 4 | 400 |
| Fan | 60 | 2 | 5 | 600 |
| Total | 1,300 Wh/day |
This household needs 1,300 watt-hours of energy per day.
In real systems, energy is lost due to dust on panels, wire resistance, panel mismatch, and inefficiencies in components. These losses are approximately 30%. To account for them, multiply the total energy by 1.3.
Formula:
Energy required (Wh/day)=Total daily energy×1.3
From Worked Example 1:
Energy required=1,300×1.3=1,690 Wh/day
Solar panels are rated in watts peak (Wp). To find the total panel size needed, divide the required energy by the peak sun hours (PSH) in your area. In Tanzania, PSH is typically 5 to 6 hours per day.
Formula:
PVsize(Wp)=Peak sun hours (h)Energy required (Wh)
From Worked Example 1 (assuming 5 PSH):
PVsize=51,690=338 Wp
If each panel is 110 Wp, then:
Number of panels=110338=3.07≈3 panels
Batteries store energy for use at night or on cloudy days. You must calculate the capacity in ampere-hours (Ah) needed to supply power for the required number of days (days of autonomy).
Formula:
Capacity (Ah)=System voltage×Battery efficiency×Depth of Discharge (DoD)Energy required×Days of autonomy
From Worked Example 1:
- Days of autonomy = 2
- System voltage = 12 V
- Battery efficiency = 85% (0.85)
- DoD = 50% (0.50)
Capacity=12×0.85×0.501,690×2=5.13,380=662.7 Ah
Use batteries with total capacity of at least 663 Ah (e.g., three 220 Ah batteries connected in parallel).
The charge controller prevents batteries from overcharging. It is rated by the maximum current it can handle.
Formula:
Icontroller=System voltagePVsize×1.25
The 1.25 is a safety factor.
From Worked Example 1:
Icontroller=123×110×1.25=12330×1.25=34.4 A
Use a 40 A charge controller.
An inverter converts DC power from the battery to AC power for household appliances. The inverter must be sized to handle the total wattage of all appliances that may run simultaneously, plus a safety margin.
Formula:
Pinverter=Total peak load (W)×1.25
From Worked Example 1:
Total peak load = 10×5 + 100×1 + 60×2 = 50 + 100 + 120 = 270 W
Pinverter=270×1.25=337.5 W
Use a 400 W inverter (or the next standard size).
| Component | Specification |
|---|---|
| Daily energy requirement | 1,690 Wh |
| Solar PV panels | 3 × 110 Wp |
| Battery bank | 663 Ah at 12V (e.g., 3 × 220 Ah) |
| Charge controller | 40 A |
| Inverter | 400 W |
- Always calculate daily energy consumption first before sizing any component.
- Use a 1.3 factor to account for system losses.
- Choose the inverter size based on the total power of all AC loads that may run at the same time.
- Ensure all components are compatible in terms of voltage (12V, 24V, or 48V).
- Days of autonomy is the number of days the battery should power the load without charging from the sun.
A small shop owner in Arusha wants to power a refrigerator (150W, 24 hours), four LED lights (10W each, 6 hours), and a radio (20W, 8 hours) using a solar PV AC system. By applying these sizing steps, the owner can determine how many panels, batteries, and what inverter size are needed to keep the shop running during frequent power cuts, ensuring business continuity without relying on expensive diesel generators.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to explain how to:
- Estimate load requirement
- Size solar
- Size charge controller
- Size batteries
- Size inverter
- Draw solar PV wiring system
Tathmini ya matokeo
PV solar AC system is designed as per requirement
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The students should explain how to: Design solar PV AC system
Principles: The students should explain procedures to design solar AC system Theory: The students should be able to explain:
- Solar PV AC components
- Principles of load calculation
Swali
What is the formula for calculating daily energy consumption of appliances in a solar PV system?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado