Mada za sehemu hiiDeveloping solar parabolic concentratorMada 2
- Making stationary concentrating collectors
- Making sun tracking concentrating collectors
Sun tracking concentrating collectors are solar thermal devices that follow the sun's movement across the sky to maximize the amount of solar energy captured. Unlike static solar panels, these collectors use a curved (parabolic) mirror to focus sunlight onto a receiver pipe containing water or another heat-absorbing fluid. The tracking mechanism ensures the curved surface always faces the sun directly, increasing efficiency by up to 30-40% compared to fixed collectors.
Before constructing a sun tracking concentrating collector, several factors must be considered:
Water Demand
The size of the absorber pipe and the storage tank must match the amount of hot water required. A household of 5 people typically needs 80-100 litres of hot water per day, which influences the collector's length and width.
Panel Size
Larger collector surfaces capture more solar energy. However, larger panels require stronger support structures and more material, increasing cost. For most household systems in Tanzania, a collector aperture width of 1.2 to 1.5 metres is practical.
Location and Orientation
The collector must be mounted where there is no shading from trees or buildings. In Tanzania (located south of the equator), the collector should face north to receive maximum sunlight throughout the year. The tilt angle should roughly equal the local latitude (approximately 6-10° for most of Tanzania).
Tracking Mechanism Type
- Single-axis tracking: Follows the sun from east to west only
- Dual-axis tracking: Follows both east-west and seasonal north-south movement
Step 1: Constructing the Frame
The frame supports the parabolic dish and the tracking mechanism.
- Cut steel or aluminium angle bars to the required dimensions using a handsaw
- Weld or bolt the frame pieces together to form a rigid rectangular base
- Attach the tracking motor or manual adjustment mechanism to the frame
- Ensure the frame can rotate smoothly on its axis
Step 2: Forming the Parabolic Dish
- Cut sheet metal or aluminium to the curved shape
- Shape the metal over a wooden or steel parabolic template
- Secure the curved surface to the frame using rivets or screws
- Check that the curve is uniform across the entire surface
Step 3: Installing the Absorber Plate
The absorber plate is the black surface that absorbs concentrated sunlight.
- Clean the copper or steel absorber pipe thoroughly
- Apply a high-absorption black coating (selective coating) to the pipe
- Mount the absorber pipe at the focal point of the parabolic dish
- The focal point is where reflected rays converge; this is usually located along the central axis of the parabola
Step 4: Connecting Pipes and Glazing
- Connect the absorber inlet and outlet pipes using appropriate fittings
- Insulate the pipes to minimize heat loss
- Install a glass cover (glazing) over the front of the collector to create a greenhouse effect
- Seal all joints with heat-resistant sealant
Step 5: Installing the Tracking System
- Attach the tracking drive mechanism to the frame
- Connect the motor or manual crank to the rotation axis
- Test that the collector can move smoothly from east to west
- Install limit stops to prevent over-rotation
Always wear appropriate PPE during construction:
- Safety gloves when handling sharp metal edges
- Safety goggles when cutting or welding
- Heat-resistant gloves when working with burner and soldering equipment
- Steel-toed boots for foot protection
A family in Arusha wants to install a sun tracking concentrating collector. They need 100 litres of hot water daily. The average solar radiation in Arusha is 5.5 kWh/m²/day.
Calculation: Determining Required Collector Area
The energy required to heat 100 litres of water from 20°C to 60°C:
Q=mcΔT
Where:
- m = mass of water = 100 kg
- c = specific heat capacity of water = 4,186 J/kg·°C
- ΔT = temperature rise = 60 - 20 = 40°C
Q=100×4186×40=16,744,000 J=4.65 kWh
accounting for 60% efficiency:
Required energy=0.604.65=7.75 kWh
Collector area needed:
Area=5.5 kWh/m2/day7.75 kWh=1.41 m2
Therefore, the family should construct a collector with an aperture area of approximately 1.5 m².
After assembly, test the system using:
- Pyranometer: Measures incoming solar radiation (should be above 800 W/m² for good performance)
- Infrared thermometer: Measures the absorber temperature (should reach 60-80°C on sunny days)
- Multimeter: Checks electrical connections for the tracking motor
In Tanzania, small-scale solar businesses in places like Mwanza or Shinyanga use sun tracking concentrating collectors to provide hot water for guesthouses and small hotels. A guesthouse owner in Mwanza might install a tracking collector to heat water for 10 guest rooms, reducing electricity costs from approximately TZS 150,000 per month for electric geysers to near-zero for water heating. This saves money while providing reliable hot water for tourists, especially in areas where grid electricity is unreliable or expensive.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to explain how to:
- Choose proper material.
- Perform curving a
- Make cooking supporting structure.
- Fabricate the parts of sun tracking concentrating collectors
- Perform welding
- Assemble sun tracking concentrating collectors
- Observe safety rules
- Store tools, equipment and materials
- Clean working area
Tathmini ya matokeo
Sun tracking concentrating collectors is made as per required standards and procedures.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The students should explain how to:
- Interpret drawings
- Fabricate parts of sun tracking concentrating collectors
- Assemble sun collectors.
Principles: The students should explain principles of :
- Light reflection
- Light absorption.
Theories: The explain:
- Operation of sun tracking concentrating
- Materials used to make sun tracking concentrating
- Application of sun tracking concentrating
Swali
What is the primary advantage of sun tracking concentrating collectors compared to static solar collectors?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado