Mada za sehemu hiiPerforming forming operationMada 4
- Performing metal cutting
- Performing metal shearing
- Performing metal bending
- Constructing sheet metal box
Performing Metal Cutting
Metal cutting is the process of cutting metals using hand-operated tools or machines. The most common hand tool used is a hacksaw. Selecting the correct blade for the material to be cut is important when setting up a hacksaw. High Speed Steel (HSS) blades are used for tough, resistant materials, while High Carbon Steel blades are for general cutting.

The following tools and equipment are used in metal cutting operations:
Hacksaw – A hand tool with a blade used for cutting metal. The teeth of the blade must point forward when installed. Hacksaws can cut metal, plastic, and wood.
Guillotine metal shear – A machine used for cutting sheet metal. It consists of a shear-table, ram, holding clamps, gauges, a moving blade, and a fixed blade. It is suitable for straight cuts on sheet metal.
Snip shear tool – A hand tool that works like scissors, with dual blades that press against each other to slice metal sheets. It is used for short straight-lined or short curve-shaped cuts on thin sheet metals.
Other essential tools include: steel ruler, scriber, try square, bench vice, vernier caliper, files, wire brush, and personal protective equipment (PPE).
Before cutting metal, always observe the following safety measures:
- Wear appropriate eye, ear, and face protection
- Use leather gloves, overall, and safety boots
- Do not wear loose clothing or have long loose hair
- Ensure the workpiece is firmly clamped in a vice
- Keep fingers away from cutting edges
- Use the correct blade for the material being cut
- Store tools properly after use to prevent rusting
- Keep the work area clean and organized
Using Guillotine Metal Shear
- Select the metal sheet to be cut
- Perform marking out using a steel ruler and scriber
- Clamp the metal sheet with the guillotine ram
- Lower the moving blade across the fixed blade to shear the metal
- Check the cut for accuracy using a try square
Using Snip Shear Tool
- Mark out the cutting line on the sheet metal
- Hold the snips firmly and align the blades with the marked line
- Cut along the marked line following the curve or straight line
- Maximum sheet thickness for snips:
- Steel: 0.7 mm
- Brass: 0.8 mm
- Copper: 1.0 mm
- Aluminium: 1.0 to 2.5 mm
Task: You are given a sheet metal, take the measurement, mark out and cut it using snip metal shear.
Product Specifications:
- Measurement done as per given instructions
- Tools, equipment and materials selected as per given list
- Sheet metal cut as per given specifications
- Tidiness maintained throughout the work
A student needs to cut a piece of aluminium sheet measuring 100 mm × 50 mm using snip shear tool. The steps are:
- Measure 100 mm length and 50 mm width using a steel ruler
- Mark the dimensions on the aluminium sheet using a scriber
- Align the snip shear blades with the marked line
- Cut carefully along the marked lines
- Check the final measurements with the steel ruler
The cut edges should be smooth and without burrs. If burrs exist, use a file to smooth them.
In Tanzania, metal cutting skills are essential for electrical installers who need to cut conduit pipes and trunking when installing wiring in buildings. For example, when installing solar power systems in homes, an electrician may need to cut metal conduit pipes to size using a hacksaw to protect wiring running from the solar panels to the inverter. This practical skill enables proper and safe electrical installations in buildings.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Interpret the drawing.
- Select the material, tools and equipment.
- Mark the workpiece.
- Clamp the workpiece on a vice.
- Mark the start groove with a triangle file.
- Perform metal cutting.
- Remove sharp edges with a file.
- Measure accuracy.
- Apply safety measures.
- Clean the workplace, workpieces and tools
Tathmini ya matokeo
Metal-cutting is performed as per technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The students should explain how to perform metal cutting
Principles: The students should explain principles related to performing metal-cutting
Theories: The students should explain:
- Types of metal cutting tools and their functions.
- Main parts of a metal cutting tool.
- The uses of various tools and equipment.
Swali
What is the main hand-operated tool used for cutting metals?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado