Sonzaschool
Rudi

Sekondari ya Kawaida · Kidato cha Pili · Amali · Electrical Engineering

Solar Power Installation

Building series resistive circuit

takriban dakika 4 kusoma

Majadiliano
Mada za sehemu hiiConstructing resistive circuitsMada 4

A series resistive circuit is a simple DC circuit where two or more resistors are connected one after another along a single path, so the same electric current flows through each component in turn.

When resistors are connected in series, they form a single continuous loop. The current that leaves the power source must pass through each resistor before returning to the source. This is different from parallel circuits, where each resistor has its own separate path to the power source.

Key Characteristics

  • Same current flows through all components — The electric current has only one path to take, so the amount of current is identical at every point in the circuit.
  • Total resistance is the sum of individual resistances — If you connect resistors in series, their resistance values add together. The formula is:

Rtotal=R1+R2+R3+…R_{total} = R_1 + R_2 + R_3 + \dots

  • Voltage divides among the resistors — The total voltage from the power source is shared among the resistors. The voltage drop across each resistor can be calculated using Ohm's Law:

V=I×RV = I \times R

where VV is voltage (volts), II is current (amperes), and RR is resistance (ohms).

Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa

Tathmini ya mchakato

The students should be able to:

  • Design a circuit diagram of the resistive circuit.
  • Select tools, equipment and materials required.
  • Prepare resistors and cables for termination.
  • Build a series resistive circuit.
  • Solder the built circuits.
  • Observe safety precautions.
  • Clean work area, tools and equipment.
  • Store tools, equipment and remained materials.

Tathmini ya matokeo

The series resistive circuit is built as per IET regulation

Tathmini ya maarifa

Knowledge evidence:

Detailed knowledge of:

Methods used: The students should explain how to build a series of resistive circuits.

Principles: The students should explain how to:

  • Construct series resistive circuit.
  • Carry out measurements in series resistive circuits.

Theories: The students should explain how to:

  • Connect resistors in series
  • Calculate total resistance
  • Calculate circuit current

Swali

What is a key characteristic of resistors connected in series?

Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.

Ingia ili kufanya mazoezi

Mwalimu

Umekwama? Niulize chochote kuhusu mada hii.

Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.

Ingia ili kuuliza

Majadiliano

Hakuna maswali bado

Ingia ili kuuliza
Inapakia majadiliano…