Mada za sehemu hiiErecting conduitsMada 2
- Erecting PVC conduits
- Erecting galvanized conduits
Erecting Galvanized Conduits
A galvanized conduit is a metal conduit made from steel that has been coated with zinc through a process called galvanization. This coating protects the steel from rust and corrosion, making the conduit durable and long-lasting. Galvanized conduits are used in electrical installations to protect wires and cables from physical damage, moisture, and harsh environmental conditions. This topic covers how to erect, or install, galvanized conduits safely and correctly.
A galvanized conduit is a type of metal conduit. Metal conduits are typically made from steel, but they can also be made from galvanized steel or aluminium. The galvanization process involves coating the steel with a layer of zinc, which acts as a protective barrier against moisture and rust.
Galvanized conduits are available in two main types:
- Rigid galvanized conduits – These are straight, inflexible pipes that provide strong protection. They are commonly used in industrial and commercial buildings where durability is essential.
- Flexible galvanized conduits – These are made by spirally winding a metal strip and applying a flexible PVC coating. They can be bent easily and are used in areas with curves or tight spaces.
Why Galvanized Conduits are Used
Galvanized conduits have several important applications in electrical installations:
- They protect cables from physical damage, such as impact or crushing.
- They resist corrosion, making them suitable for damp or outdoor environments.
- They provide fire resistance, which is important in buildings where safety is a priority.
- They are used in industrial areas like factories and warehouses where cables face heavy mechanical stress.
- They are also used in commercial buildings, basements, and outdoor installations where extra protection is needed.
Advantages of Galvanized Conduits
- High mechanical strength and durability
- Fire-resistant
- Resistant to corrosion due to zinc coating
- Long lifespan, even in harsh environments
- Provide excellent protection for cables
Disadvantages of Galvanized Conduits
- More expensive than PVC conduits
- Heavier and more difficult to handle
- Can corrode if the galvanization is damaged
- Installation is more complex compared to PVC conduits
Before starting any conduit installation, you must have the right tools. The following tools and safety gear are needed for erecting galvanized conduits:
Cutting and Preparation Tools:
- Pipe cutter or hacksaw – for cutting conduits to the required length
- Reamer – for removing sharp edges after cutting
- Round files – for smoothing rough edges
- Bench vice – for holding conduits securely while working
Bending Tools:
- Bending machine – for cold bending metal conduits
- Bending block – for manual bending
- Spring bender – inserted inside the conduit to prevent collapsing during bending
Measuring and Marking Tools:
- Measuring tape – for measuring lengths
- Spirit level – for ensuring conduits are straight and level
- Marker or chalk – for marking cutting and bending points
General Tools:
- Combination pliers
- Diagonal cutting pliers
- Long nose pliers
- Ball peen hammer and claw hammer
- Set of screwdrivers
- Pipe vice
Safety Gear (PPE):
- Leather gloves
- Safety boots
- Safety goggles
- Overall or work clothes
Step 1: Planning and Measurement
Before installing, study the wiring diagram to understand the route the conduit will follow. Plan the path to avoid obstacles like water pipes, gas lines, or structural beams.
- Measure the required length of conduit using a measuring tape.
- Mark the measurement clearly on the conduit with a marker.
- Ensure you add extra length for any bends or offsets.
Step 2: Cutting the Conduit
- Secure the conduit firmly in a bench vice or pipe vice.
- Mark the exact point where you need to cut.
- Use a pipe cutter or hacksaw to cut the conduit at the marked point.
- Use a reamer or round file to remove burrs and sharp edges from the inside and outside of the cut end. This prevents damage to cable insulation during installation.
Step 3: Bending the Conduit
In electrical installations, you often need to navigate around obstacles or corners. This requires bending the conduit. There are several types of bends:
- 90° Stub-up bend – Used to run conduits up or down through floors or walls, or to make L-shaped turns.
- Offset bend – Used to navigate around obstacles while changing elevation. It forms an S-shape.
- Saddle bend – Used to cross over existing conduits, beams, or pipes.
For galvanized (metal) conduits, cold bending is the preferred method. Cold bending is done at room temperature without applying heat.
How to Perform Cold Bending:
- Secure the metal conduit firmly in a pipe vice.
- Insert a spring bender inside the conduit at the point where the bend is required. This prevents the conduit from collapsing or kinking.
- Apply steady pressure by hand or using a bending machine to bend the conduit to the required angle.
- Remove the spring bender and check the bend for accuracy.
- Ensure the bend is smooth and free from wrinkles or kinks.
Step 4: Joining and Mounting
- Use appropriate fittings, such as couplings or elbows, to join sections of conduit together.
- Ensure all joints are tight and secure to prevent moisture or dust entering.
- Mount the conduit along the planned route using suitable supports, clamps, or brackets.
- Use a spirit level to ensure the conduit is straight and properly aligned.
Step 5: Drawing in Wires (Optional)
After the conduit system is installed, you can draw wires through the conduit using draw wire (also called fish wire or snake wire).
- Attach the wires to the draw wire using cable pulling socks or tape.
- Push the draw wire through one end of the conduit and pull the wires through to the other end.
- Ensure the wires are not damaged during this process.
Safety is essential when installing conduits. Always follow these safety measures:
Before Starting Work:
- Wear appropriate PPE: gloves, safety boots, safety goggles, and overalls.
- Check the work area for hazards such as flammable materials or unstable surfaces.
- Ensure the power supply is switched off and locked out if working near existing electrical installations.
- Inspect all tools to ensure they are in good working condition.
During Installation:
- Secure conduits properly in the vice when cutting or bending to prevent them from slipping.
- Handle sharp tools carefully to avoid injuries.
- Keep the work area clean and free of debris.
- Ensure conduits are supported at regular intervals to prevent sagging.
After Installation:
- Check all bends and joints to ensure they are properly formed and secure.
- Perform a visual inspection to confirm the installation meets standards.
- Clean the workspace and store tools properly.
The space factor refers to how much of the conduit's internal cross-sectional area is occupied by cables. According to standards, the space factor for conduits should not exceed 40%. This means that cables must occupy no more than 40% of the conduit's interior space.
This limit is important because:
- Overfilling makes it difficult to pull cables through without damaging insulation.
- Crowded cables generate more heat, which can cause overheating.
- It allows space for future additions or modifications.
Worked Example:
If you have a conduit with an internal cross-sectional area of 200 mm², what is the maximum area that cables can occupy?
Solution:
Maximum cable area = 40% × 200 mm² = 0.40 × 200 mm² = 80 mm²
Therefore, the cables must not occupy more than 80 mm² of the conduit's interior space.
- Galvanized conduits are metal conduits coated with zinc to prevent corrosion.
- They are strong, durable, and fire-resistant, making them suitable for industrial and commercial use.
- The installation process involves planning, measuring, cutting, bending, joining, and mounting.
- Cold bending is used for metal conduits, while hot bending is used for PVC.
- The space factor must not exceed 40% to prevent damage and overheating.
- Safety measures, including wearing PPE and securing tools, must be followed at all times.
In Tanzania, galvanized conduits are commonly used in commercial buildings, factories, and markets such as those in Kariakoo or Mwanza, where electrical cables need strong protection from moisture and physical damage. For example, when wiring a small hardware shop in Arusha, an electrician might use galvanized conduits to protect the wiring running along the walls, ensuring the electrical system lasts longer even during the rainy season. This helps business owners avoid frequent repairs and costs, making the installation a smart long-term investment.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Interpret architectural drawing.
- Draw electrical diagrams.
- Select tools, equipment and materials required.
- Mount the conduit.
- Clean work area.
- Store tools, equipment and safety gear.
Tathmini ya matokeo
Galvanized conduit is erected as per the IET regulations.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The students should explain how to erect galvanized conduit.
Principles: Students should be able to state the correct procedures for erecting galvanized conduits
Theories: The students should explain:
- Types and size of galvanized conduits.
- Types of bends and joints.
- IET regulations
Swali
What is a galvanized conduit?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado