Mada za sehemu hiiErecting trunking and cable traysMada 3
- Erecting PVC trunking
- Installing skirting trunking
- Erecting cable trays
Erecting PVC Trunking
Trunking is a protective system used to hold and organize electrical cables. It is usually rectangular or square in shape with a removable cover. The main functions of trunking are to keep cables organized, making it easier to install, maintain, or repair the electrical system. Trunking protects cables from physical damage, prevents them from getting tangled, and reduces the risk of accidents. It is commonly used for surface or overhead wiring and is considered an easier-to-access alternative to concealed conduit systems.
Trunking is available in two main types:
Metallic Trunking
Metallic trunking is made from mild steel and is usually painted or galvanized to prevent corrosion. It is strong, durable, fire-resistant, and provides excellent protection for cables. Metallic trunking is used in:
- Industrial facilities with heavy impacts or fire risks
- Commercial buildings like malls and offices
- Hospitals and laboratories where hygiene and safety are important
- High-risk areas such as chemical plants, mines, and oil refineries
Non-metallic (PVC) Trunking
PVC trunking is made from strong polyvinyl chloride (PVC) material. It is lightweight, easy to install, and affordable. PVC trunking is commonly used in:
- Homes and offices (low-risk areas)
- Temporary installations at events
- IT and telecom networks for routing data cables (internet and telephone cables)
- Surface wiring to keep walls neat
- Inside control panels where easy access and cable organization are required
PVC trunking offers several benefits:
- Lightweight – Easy to handle and install
- Cost-effective – Cheaper than metallic trunking
- Corrosion resistant – Does not rust or corrode
- Easy to cut and shape – Can be modified on-site
- Good insulator – Does not conduct electricity
- Lower mechanical strength compared to metal
- Not suitable for high-temperature areas (near boilers or furnaces)
- Can become brittle over time when exposed to direct sunlight
The trunking space factor refers to the ratio of space occupied by all cables inside the trunk to the total internal space of the trunk. The rule of thumb is that this ratio should equal 0.45 (or 45%). This means cables must not fill more than 45% of the available space inside the trunking.
This limit is important because:
- It prevents dangers of mechanical damage caused by overcrowding
- It enhances air circulation for heat dissipation
- It simplifies installation and maintenance
Worked Example: Selecting Trunking Size
Problem: Determine the minimum size of PVC trunking required to house fifteen 1.5 mm² single-core cables and ten 2.5 mm² single-core cables.
Solution:
Step 1: Calculate the total cross-sectional area of all cables
- Total area = (15 × 1.5) + (10 × 2.5)
- Total area = 22.5 + 25 = 47.5 mm²
Step 2: Apply the space factor (0.45)
Required trunking internal area = Total cable area ÷ Space factor Required trunking internal area = 47.5 ÷ 0.45 = 105.6 mm²
Step 3: Select a trunking size with internal area of at least 105.6 mm²
Therefore, a trunking size of 100 mm × 50 mm (giving 5,000 mm²) would be suitable, but a practical size like 75 mm × 25 mm (1,875 mm²) or similar standard size would be selected based on manufacturer specifications.
The following tools and equipment are needed:
- Junior hacksaw or hacksaw (for cutting PVC trunking)
- Set of screwdrivers
- Set of spanners
- Set of files (for smoothing cut edges)
- Measuring tape
- Spirit level (for ensuring straight installation)
- Hammer
- Combination pliers
- PVC trunking pieces and accessories (corners, connectors, caps)
Always wear the following personal protective equipment (PPE):
- Overall
- Safety boots
- Safety goggles
- Leather gloves
Step 1: Planning and Preparation
- Study and interpret the wiring diagram to understand the trunking routes
- Identify the positions where trunking will be installed
- Select appropriate trunking sizes and accessories
Step 2: Marking Out
- Measure and mark the positions on the wall or surface where trunking will be mounted
- Use a spirit level to ensure marks are straight and level
Step 3: Cutting Trunking
- Measure the required lengths accurately
- Cut the PVC trunking using a junior hacksaw
- Use a file to smooth any rough edges after cutting
Step 4: Assembling Trunking
- Connect trunking pieces using appropriate connectors
- Install corner pieces for directional changes
- Ensure all connections are secure and properly aligned
Step 5: Mounting and Securing
- Fix the trunking to the wall or surface using appropriate fasteners
- Maintain proper spacing between supports (usually every 1-1.5 metres)
- Check with spirit level to ensure trunking is straight
Step 6: Installing Cables
- Lay cables inside the trunking, ensuring they are not overcrowded
- Leave enough space for future additions (remember the 45% rule)
- Secure the cover onto the trunking
Step 7: Final Inspection
- Check that all sections are properly connected
- Verify the installation is straight and secure
- Ensure the cover fits properly
- Wear appropriate PPE at all times
- Check the site for hazards such as flammable materials or unstable surfaces
- Ensure power is OFF and locked out before beginning work
- Use correct tools for the job
- Keep the work area clean to avoid accidents
- Install trunks of the right size, properly supported and secured
- Route trunking away from other services like water pipes and communication cables
- After installation, perform a visual inspection to ensure everything is correctly in place
PVC trunking is widely used in:
- Residential buildings for surface wiring
- Schools and office buildings
- Small shops and markets
- Telecommunications installations
- Solar power system installations (for routing DC and AC cables)
In Tanzania, PVC trunking is commonly used during solar panel installations on residential rooftops. For example, when installing a 500W solar system in a house in Dar es Salaam, electricians use PVC trunking to neatly route the DC cables from the solar panels to the charge controller and then to the battery bank. This protects the cables from sunlight, moisture, and physical damage, ensuring the solar system lasts longer and operates safely. A student who learns this skill can start a small electrical wiring business in their community, offering to install PVC trunking for homes, shops, or small solar installations.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to explain how to:
- Draw the plan of the work.
- Select tools, equipment and materials required.
- Install trunking.
- Observe safety precautions
- Clean the work place.
- Store tools and material remained.
Tathmini ya matokeo
PVC trunking is erected as per IET regulations.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The students should be able to explain how to erect PVC truncking
Principles: Students should be able to demonstrate the correct steps for erecting PVC trunking
Theories: The students should explain:
- Types of trunking
- IET regulation
Swali
What is the main purpose of trunking in electrical installations?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado