Mada za sehemu hiiErecting trunking and cable traysMada 3
- Erecting PVC trunking
- Installing skirting trunking
- Erecting cable trays
Skirting trunking is a type of protective enclosure installed along the lower part of walls at skirting board level to house and organize electrical, data, and communication cables while keeping them concealed and accessible.
Skirting trunking is a rectangular or square cable management system that runs along the bottom of walls, similar to a traditional skirting board. It has a removable cover that allows easy access to the cables inside for maintenance, repairs, or adding new cables. This makes it a popular choice for both new installations and upgrades to existing electrical systems.
Advantages of Skirting Trunking
- Neat appearance: Cables are hidden while keeping the area clean and tidy
- Easy installation: Located at an accessible height, making installation quick and simple
- Easy maintenance: Cables can be added or removed easily without disturbing the wall
- Versatility: Can house electrical, data, and communication cables together
Skirting trunking is classified according to the material used in its construction:
1. PVC Skirting Trunking
- Made from polyvinyl chloride (PVC) material
- Lightweight and easy to handle
- Resistant to moisture and corrosion
- Commonly used in offices and homes
- Lower cost compared to metal options
2. Metal Skirting Trunking
- Made from steel or aluminium
- Heavier and stronger than PVC
- Fire-resistant and durable
- Suitable for harsh environments such as factories, industries, and commercial buildings
- Provides excellent protection against physical damage
3. Wooden Skirting Trunking
- Made from wood
- Offers attractive interior appearance
- Commonly used in hotels and high-end offices where aesthetics are important
- Provides a premium look but requires careful handling
Step 1: Planning and Preparation
- Study and interpret the wiring diagram to understand cable routes
- Identify the type and size of skirting trunking required
- Gather all necessary tools and materials
Step 2: Marking Out
- Use a measuring tape to measure the length of wall where trunking will be installed
- Use a spirit level to ensure straight and level marking
- Mark positions for fixing points, joints, and corners
Step 3: Cutting the Trunking
- Measure and mark the exact length needed
- Use a junior hacksaw or hacksaw to cut the trunking to size
- Use files to smooth any sharp edges after cutting
Step 4: Installing the Trunking
- Position the trunking against the wall along the marked line
- Fix the trunking using appropriate screws or clips
- Ensure the trunking is level using a spirit level
- Install corner pieces and joints as needed
Step 5: Placing Cables
- Lay the cables inside the trunking carefully
- Ensure cables are not overcrowded (remember the 45% space factor rule)
- Leave enough space for air circulation to prevent overheating
Step 6: Securing and Finishing
- Fix the cover onto the trunking
- Check that all connections are secure
- Perform a visual inspection to ensure neat and proper installation
Before starting installation:
- Wear appropriate PPE: overall, safety boots, safety goggles, and leather gloves
- Check the site for hazards such as flammable materials or unstable surfaces
- Ensure the power supply is turned OFF and locked out
- Use correct tools for the job
During installation:
- Keep the work area clean to avoid accidents
- Handle tools properly to prevent injuries
- Ensure trunking is properly supported and secured
After installation:
- Perform visual inspection to verify everything is correctly in place
- Store tools and clean the working area
A student needs to install skirting trunking for a small office that requires:
- 5 cables of 1.5 mm²
- 3 cables of 2.5 mm²
Solution:
First, calculate the total cross-sectional area of cables:
- Area for 1.5 mm² cables: 5 × 1.5 = 7.5 mm²
- Area for 2.5 mm² cables: 3 × 2.5 = 7.5 mm²
- Total area = 7.5 + 7.5 = 15 mm²
Using the trunking space factor of 45% (0.45): Required trunking area = Total cable area ÷ Space factor Required trunking area = 15 ÷ 0.45 = 33.3 mm²
Therefore, the student should select a skirting trunking with an internal cross-sectional area of at least 35 mm² to accommodate the cables safely without overcrowding.
In Tanzania, skirting trunking is commonly used in modern office buildings in Dar es Salaam and other cities to organize electrical wiring and data cables along walls without having to chase into the walls. A small electrical contractor in Mwanza might use PVC skiring trunking to install cables in a client's newly built shop, providing a neat and professional finish that allows easy future modifications or repairs — this service could earn the contractor between TSh 150,000 to TSh 300,000 depending on the size of the installation.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to explain how to:
- Draw the plan of the work.
- Select tools, equipment and materials required.
- Install skirting trunking
- Observe safety precautions
- Clean the work place.
- Store tools and material remained.
Tathmini ya matokeo
- Installation of skirting trunking is performed as per IET regulations.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The students should be able to explain how to install skirting trunking
Principles: Students should be able to demonstrate the correct procedures for installing skirting trunking Theory: the students should be able to explain
- Skirting trunking
- IET regulation
Swali
What is the primary purpose of skirting trunking in electrical installations?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado