Mada za sehemu hiiErecting trunking and cable traysMada 3
- Erecting PVC trunking
- Installing skirting trunking
- Erecting cable trays
Erecting Cable
Erecting cable refers to the process of installing cable trays to support, route, and protect electrical cables in buildings and industrial facilities. This method provides a systematic way to organize cables while allowing for easy maintenance and heat dissipation.
A cable tray is a cable management system used to support, route and protect electrical cables and wires. It is commonly used in electrical installations with a large number of cables, such as in industries and factories. Unlike trunking, cable trays are open systems that protect cables without fully enclosing them, offering flexibility and ease of maintenance.
Perforated Cable Trays
These trays have solid bottom construction with holes or slots to enhance ventilation. They are commonly used for data cables and electrical wiring in commercial buildings.
Wire Mesh Cable Trays
Formed by a grid of steel or aluminium wires, these trays are lightweight and highly flexible. They are widely used in IT networks and telecommunication systems.
Solid Bottom Cable Trays
These trays have no holes and provide a continuous solid bottom. They are suitable for harsh environments requiring robust cable protection, such as in factories and industries.
The space factor refers to the percentage of the cable tray's internal area occupied by cables. The rule of thumb is to maintain a space factor of 50% or less.
To calculate the required tray size:
- Determine the total cross-sectional area of all cables
- Divide by the space factor (0.5) to find the required internal area
- Select a tray with internal area equal to or greater than this value
Worked Example
Problem: Determine the size of a cable tray to house ten 1.5 mm² single-core conductors, ten 2.5 mm² single-core conductors, and five 4.0 mm² single-core conductors.
Solution:
- Total cable area = (10 × 1.5) + (10 × 2.5) + (5 × 4.0) mm²
- Total cable area = 15 + 25 + 20 = 60 mm²
Using a space factor of 0.5:
- Required internal area = 60 ÷ 0.5 = 120 mm²
Therefore, select a cable tray with an internal area of 120 mm² or more.
- Allow good airflow, preventing cables from overheating
- Simplify maintenance as cables are easily accessible
- Provide flexibility for adding or removing cables as needed
- Support heavy loads due to steel or aluminium construction
- Cost-effective and easy to install
- Open design exposes cables to dust, which can damage insulation over time
- Cables may be subject to physical damage or tampering
- May appear untidy, making them less suitable for hotels or high-end offices
Required tools: Junior hacksaw, hacksaw, set of screwdrivers, set of spanners, set of files, spirit level, hammer, measuring tape, combination pliers
Safety gear: Overall, safety boots, safety goggles, leather gloves
- Wear appropriate PPE at all times
- Inspect the site for hazards such as flammable materials or unstable surfaces
- Ensure the power supply is switched OFF and locked out before starting work
- Use correct tools and keep the work area clean
- Select cable trays of the correct size
- Ensure trays are properly supported and kept clear of other services
- Follow minimum bending radius standards to prevent cable damage
- Perform a visual inspection after installation
Step 1: Study and interpret the given wiring diagram to identify the layout and required tools and materials.
Step 2: Gather all necessary tools, materials, and equipment.
Step 3: Mark out the routes where the cable trays will be installed using a measuring tape and spirit level to ensure accuracy.
Step 4: Measure the required length of the cable tray and cut it to size using an appropriate saw.
Step 5: If bends are required, measure and mark the points where bends are needed. Use appropriate bending tools to form the desired angles (90° bends, offsets, or saddle bends).
Step 6: Install and mount the cable trays, ensuring they are properly supported and secured.
Step 7: Check and verify the installation for accuracy and stability.
Step 8: Clean the working area and store all tools and equipment properly.
In Tanzania, cable trays are commonly used in institutions like schools, hospitals, and markets to organize electrical wiring safely. For example, when installing solar power systems in rural health clinics, electricians use cable trays to protect and organize the wiring from the solar panels to the inverter and distribution board, ensuring the system remains safe and easy to maintain for many years.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to explain how to:
- Draw the plan of the work.
- Select tools, equipment and materials required.
- Install cable trays.
- Observe safety precautions
- Clean the work place.
- Store tools and material remained.
Tathmini ya matokeo
Cable trays.is erected as per IET regulations.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The students should be able to explain how to erect cable trays.
Principles: Students should be able to demonstrate the correct procedures for erecting cable trays with precision and accuracy. Theory the students should be able to explain
- Cable tray
- IET regulation
Swali
What is the primary purpose of a cable tray in electrical installations?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado