Mada za sehemu hiiConstructing ducts and trenchesMada 2
- Constructing ducting system
- Constructing cable trenches
Constructing Ducting System
A duct is a specifically designed channel used to house, route, organize, and protect electrical cables and wiring. Ducts are typically constructed from rigid materials such as concrete, steel, or fibre. They are widely used in multi-story buildings, industrial facilities, factories, underground installations, hospitals, and healthcare facilities. Once a duct is constructed, additional routing systems like conduits, trunking, or cable trays may be used inside the duct to organize and support the electrical wiring.
Ducts can be classified based on the construction material and the installation location.
Classification by Material
Concrete ducts are made from precast or reinforced concrete. They are formed by creating a channel with shuttering, into which a concrete mix is poured and set. Concrete ducts are very durable and provide excellent protection against external forces.
Steel ducts are constructed from steel and are often provided with movable outlets for flexible cable routing. They offer good mechanical strength and can be reused in some cases.
Fibre ducts are made from fibre materials. They offer lightweight and durable cable protection. They are resistant to corrosion and are easier to handle compared to concrete ducts.
Classification by Installation Location
Underfloor ducting systems are installed beneath the floor to route cables in commercial and office spaces. The duct structure is installed prior to the pouring of the concrete floor, forming an integral part of the building's infrastructure.
Underground ducting systems are used for buried cable installations, providing protection from external elements. These ducts are typically made of concrete or PVC, offering durability and resistance to soil pressure and moisture.
Vertical risers (electrical risers) are integrated within walls to distribute power vertically in buildings. They are also called under-wall bus ducts. These are essential in multi-storey buildings, including commercial complexes and apartment buildings, ensuring efficient power distribution while maintaining a neat and secure electrical layout.
The space factor for ducts refers to the ratio of the space occupied by the cables to the total space inside the duct. The space factor for ducts should typically not exceed 35%. This is lower than other cable enclosure systems (conduits at 40%, trunking at 45%, and cable trays at 50%) because the absence of airflow within a fully enclosed duct can lead to overheating and reduced cable efficiency.
Worked Example: Calculating Required Duct Size
Problem: Ten 2.5 mm² single-core PVC cables need to be installed in an underfloor duct. Calculate the minimum internal cross-sectional area required for the duct.
Solution:
- Total cable area = 10 × 2.5 mm² = 25 mm²
- Using the space factor of 35% (or 0.35), the required duct area is calculated as:
Required duct area=Space factorTotal cable area
Required duct area=0.3525=71.43 mm2
Therefore, a duct with an internal cross-sectional area of at least 72 mm² should be selected.
Underfloor ducting systems are constructed beneath the floor and are typically composed of steel or fibre ducts. The construction process follows these steps:
- Plan the layout — Study the specifications, layout, and wiring diagram to understand the routes of the underfloor ducting system.
- Prepare the site — Mark the positions where ducts will be installed according to the layout diagram.
- Install the ducts — Place the duct structure in position before pouring concrete. Ensure ducts are properly supported and aligned.
- Terminate and draw in cables — If included in the design, draw in wires and perform terminations according to the wiring diagram.
- Complete the floor — Pour concrete to embed the ducts permanently.
- Clean up — Clean the working area and store tools and equipment.
An underground ducting system consists of ducts installed beneath the ground to provide a protected pathway for electrical cables. These ducts are typically made of concrete, offering durability and resistance to external forces. The construction steps include:
- Plan and mark — Study the layout and wiring diagrams to understand the routes. Mark the excavation area clearly.
- Excavate — Use appropriate tools such as excavator machines to dig the trench to the required depth.
- Prepare the bed — Create a level and stable base for the ducts.
- Lay the ducts — Place the concrete or PVC ducts in position, ensuring proper alignment and joint sealing.
- Draw in cables — If included, pull cables through the ducts and perform terminations.
- Backfill — Cover the ducts with soil, compacting carefully to avoid damage.
- Test and inspect — Perform continuity and insulation resistance tests before final backfilling.
An under-wall bus duct, also known as an electrical riser, is a concealed duct system integrated within the walls of buildings. It is constructed by creating a vertical shaft that facilitates the organized running of electrical cables from the underground or ground floor to various levels of the building.
Advantages of electrical risers:
- Helps distribute power safely and efficiently in multi-storey buildings
- Reduces clutter by keeping all wiring in one place
- Makes maintenance easier
- Allows the building to be upgraded or expanded without major changes
- Makes troubleshooting easier because electrical faults can be found quickly
The following tools and equipment are needed for constructing ducting systems:
- Electrician's tool kit (screwdrivers, pliers, wire strippers)
- Hammer
- Lock forming machine
- Shrimp bend machines
- Hand drill
- Excavator machines
- Measuring tape
- Spirit level
- Cable plastic protecting cover
To ensure safe construction of ducts, the following safety measures must be observed:
- Wear appropriate PPE: Safety boots, overalls, gloves, safety helmets, and safety goggles must be worn at all times.
- Inspect the site: Check for hazards such as unstable ground or underground utilities (water pipes, gas lines). Mark the work area to prevent accidents.
- Use correct tools: Use the right tools for each task and keep the work area clean.
- Maintain clearances: Keep ducts clear of other underground services and follow guidelines for depth and bending radius.
- Check support and spacing: Ducts must be of the correct size, properly supported, and spaced to avoid structural problems.
- Inspect after installation: Perform a visual check and testing to ensure everything is safe and meets standards.
Advantages
- Protect cables from mechanical damage and harsh weather
- Keep wiring neat by hiding the cables
- Allow many cables to be organised in one place
- Make maintenance easier
- Allow for future expansion of the wiring system
Disadvantages
- Take more time to prepare
- Require skilled workers and careful planning
- Need enough space in the building design
- Can be expensive to construct
In Tanzania, ducting systems are commonly used during the construction of commercial buildings and institutions such as schools and hospitals. For example, when installing solar power systems in a multi-story office building in Dar es Salaam, electricians may construct underfloor or vertical riser ducts to route cables from the solar panel installation on the roof down to the distribution board. This protects the cables from physical damage and weather conditions while maintaining a neat appearance. Understanding how to calculate space factor is practical when determining how many solar cables can safely be housed in a single duct, ensuring the installation remains safe and compliant with standards.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to explain how to:
- Select materials, equipment and tools for constructing ducts
- Interpret drawings
- Prepare site for construction of ducts
- Construct ducts as per requirement
- Observe safety precautions
- Clean the work area
- Store tools, equipment and safety gear
Tathmini ya matokeo
Duct is constructed as per IET Regulations.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The students should explain how to construct ducts Principle: Students should be able to demonstrate the correct procedures for constructing ducts and trenches
Theories: The students should explain:
- Types of Ducts and their applications
- IET regulations
Swali
What is the primary purpose of a duct in electrical installations?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado