Mada za sehemu hiiDrafting basic traditional blocks patternsMada 4
- Constructing bodice front and back block patterns
- Constructing sleeve block patterns
- Constructing skirt front and back block patterns
- Constructing trousers/shorts front and back block patterns
Constructing Skirt Front and Back Block Patterns
A skirt block pattern is a basic template that shows the shape of the front and back panels of a skirt. It is drafted using body measurements and serves as the foundation for creating many different skirt styles, from simple straight skirts to flared and gathered designs.
Before drafting, you need to take the following body measurements:
- Waist circumference – around the narrowest part of the waist
- Hip circumference – around the fullest part of the hips
- Waist to hip length – vertical distance from waist to hips
- Skirt length – from waist to where you want the hem to fall
You also need to add ease (extra fabric) to ensure the skirt is comfortable. Standard ease allowances are:
- Hip ease: 1.5 cm
- Dart allowance: 2–2.5 cm
Step 1: Draw the Basic Framework
- Draw a vertical line from point 1 at the top and square across to create the foundation.
- Mark the centre front line:
- Point 1 to Point 2 = (Hip measurement ÷ 2) + 1.5 cm ease
- Mark the hemline:
- Point 1 to Point 3 = Skirt length
- Square across from Point 3 to Point 4 on the centre front line
- Mark the hipline:
- Point 1 to Point 5 = Waist to hip measurement
- Square across from Point 5 to Point 6 on the centre front line
Step 2: Complete the Back Panel
- From Point 5, measure to Point 7 = (¼ hip measurement) + 1.5 cm ease
- Square down from Point 7 to Point 8 on the hemline
- From Point 1, measure to Point 9 = (¼ waist measurement) + 4 cm (dart allowance)
- From Point 9, measure 1.25 cm to Point 10
- Join Point 10 to Points 1 and 7 with dotted lines to shape the side seam
- Divide the line from Point 1 to Point 10 into three equal parts and mark Points 11 and 12
- From Points 11 and 12, square down dotted lines about 12–14 cm
- Point 11 to Point 13 = 14 cm
- Point 12 to Point 14 = 13 cm
- Construct two darts, each 2 cm wide on these lines
- Redraw the waistline with a gentle curve and shape the side seam, curving outward by 0.5 cm
The front panel is drafted similarly but with slight differences:
- From Point 2 on the centre front, measure to Point 15 = (¼ waist measurement) + 2.5 cm dart allowance
- From Point 15, measure 1.25 cm to Point 16
- Join Point 16 to Points 2 and 7 with dotted lines for the side seam
- Divide the line from Point 2 to Point 16 by three and mark Point 17 from Point 16
- From Point 17, square down a dotted line about 10–12 cm
- Construct a 2.5 cm wide dart on this line
- Draw the waistline with a slight curve and shape the side seam, curving outward by 0.5 cm
Given measurements for a student:
- Waist: 68 cm
- Hip: 92 cm
- Waist to hip: 18 cm
- Skirt length: 55 cm
Calculating the pattern points:
| Measurement | Calculation | Result |
|---|---|---|
| Hip ÷ 2 + 1.5 cm | (92 ÷ 2) + 1.5 | 47.5 cm (Point 2) |
| ¼ hip + 1.5 cm | (92 ÷ 4) + 1.5 | 24.5 cm (Point 7) |
| ¼ waist + 4 cm | (68 ÷ 4) + 4 | 21 cm (Point 9) |
| ¼ waist + 2.5 cm | (68 ÷ 4) + 2.5 | 19.5 cm (Point 15) |
Dart positions:
- Back darts: 14 cm and 13 cm long from waist
- Front dart: 10–12 cm long from waist
- Always add ease allowances to hip and waist measurements for comfort
- Darts shape the skirt to fit body curves at the waist and hips
- The back panel is usually slightly wider than the front at the hip for proper fit
- Mark grainlines parallel to the centre front and centre back for accurate cutting
- Add seam allowances (usually 1–1.5 cm) after completing the pattern
- Label each pattern piece clearly: "Skirt Front" and "Skirt Back"
After drafting, verify your pattern by:
- Checking that waist and hip measurements match your calculated values
- Ensuring darts are evenly spaced and properly sized
- Confirming the grainlines are straight and parallel to centre lines
- Testing the pattern with muslin (test fabric) before cutting the final fabric
In Tanzania, tailors and dressmakers in local markets like Mwembe Tayari in Zanzibar or Kariakoo in Dar es Salaam use skirt block patterns to create custom skirts for customers. A tailor measuring a customer with a 70 cm waist and 94 cm hip would draft a block pattern, add appropriate ease, and then adapt it into styles like a straight pencil skirt for office wear or a flared Kitenge skirt for cultural events, ensuring a good fit without expensive commercial patterns.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Identify block patterns to be made.
- Select tools.
- Take actual body measurements.
- Calculate actual body
- measurements into working measurements.
- Prepare paper for pattern drafting.
- Draw skirt block patterns on the draft paper.
- Trace drafted block patterns onto hard (Manila) paper.
- Mark and label pattern pieces.
- Cut out pattern pieces.
- Group and pack pattern pieces together.
- Store patterns safely.
- Clean the workplace.
- Store tools.
Tathmini ya matokeo
Construction of skirt front and back block patterns done as per the given technical specification.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of: Method used: The student should explain how to:
- Make skirt block pattern as per
- standard Principles
- The student should explain the principles involved in:
- patterns categories
- Caring of patterns drafting tools
- Maintain cleanliness.
- Theories: The student should explain:
- Types of patterns
- importance of each pattern category
Circumstantial knowledge: Detailed knowledge about:
- Safety procedures while using pattern drafting tools.
- First aid. Environmental issues.
Swali
What is the purpose of adding 1.5 cm ease to the hip measurement when drafting a skirt block pattern?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado