Mada za sehemu hiiPerforming vegetable tanningMada 6
Dipping hides and skins is a crucial step in vegetable tanning where the pre-treated pelt is immersed in a tanning liquor (tannin solution) to transform raw hide into durable leather. This process chemically binds the tannins to the collagen fibers in the hide, preventing decay and giving the leather its characteristic strength and durability.
Dipping is the act of immersing a limed and delimed pelt into a tanning liquor bath. The pelt absorbs tannin molecules that cross-link the collagen fibers, effectively "fixing" the protein structure. Without proper dipping, the hide would eventually rot and decompose.
- To preserve the hide by making it resistant to bacterial attack
- To give the leather its strength and durability
- To create a stable material that can be further processed into leather goods
Step 1: Prepare the Tanning Liquor
The tanning liquor is prepared by dissolving vegetable tannins in water. Common tannin sources in Tanzania include:
- Bark — from trees like acacia or mninga
- Leaves — from certain shrubs
- Fruits — such as myrobalan
The liquor is cooked in a cooking pot over a stove until the tannins are fully dissolved, then allowed to cool to the correct temperature.
Step 2: Prepare the Pelts
Before dipping, the pelts must be properly prepared:
- Remove any remaining flesh and fat using tanning knives
- Ensure the pelt is clean and free from lime (after deliming)
- Soak the pelt in clean water to remove any dirt
Step 3: Dip the Pelts
- Wear protective gear: rubber gloves, overall/over coat, and safety boots
- Place the pelt into the plastic container or tanning vessel filled with the prepared tanning liquor
- Fully immerse the pelt, ensuring all parts are in contact with the liquor
- Allow the pelt to soak — the duration varies depending on the thickness of the hide and the strength of the liquor, typically several hours to overnight
- Stir the pelts occasionally to ensure even tannin absorption
Step 4: Test for Completion
A simple test involves cutting a small strip from the edge of the hide. If the interior shows a uniform tan color (no white or pale spots remain), the tanning process is complete.
Step 5: Remove and Rinse
- Carefully remove the tanned pelt from the liquor
- Rinse thoroughly with clean water to remove excess tannins
- Hang on drying boards or spread on leather horses to dry in a shaded area (working shade)
- Always work in a well-ventilated area or working shade
- Use rubber gloves to protect hands from the tannin solution, which can stain skin
- Wear safety boots to protect feet when working with wet pelts
- Avoid direct contact with tannin solution; wash immediately if spilled on skin
A tanner in Arusha has prepared a goat skin for tanning. He cooks a tannin solution using 2 kg of acacia bark boiled in 10 liters of water. After cooling, he dips the delimed goat skin into the solution for 6 hours, stirring every hour. After 6 hours, he removes the skin, rinses it, and tests the cut edge — it shows a uniform brown color, meaning the skin is fully tanned. He then hangs it on a drying board in the shade to dry.
- Insufficient soaking time — results in "uneven tanning" where some areas remain raw
- Using hot liquor — can cause the hide to shrink and become stiff
- Skipping rinsing — excess tannins left on the surface cause the leather to crack
- Drying in direct sunlight — causes the leather to become hard and brittle
A small-scale tanner in Morogoro uses the dipping technique to process hides collected from local slaughterhouses. By properly dipping the hides in tannin liquor, they produce durable leather that can be sold to crafters making belts, bags, and sandals for the local market, earning an income of approximately TZS 30,000–50,000 per finished hide.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select material
- Identify tanning materials
- Select tools and equipment
- Inspect the pelt for quality
- Wash the pelt
- Handle tanning knives
- Estimate amount of water
- Prepare tanning liquor
- Start tanning process
- Conduct frequent tests
- Take measurement of tanning
- Dip pelt into tanning liquor
- Check for penetration of tanning
- Observe tanning completion
- Clean the pelt
- Observe safety
- Clean work place
- Clean tools and equipment
- Store pelt
- Store tools and equipment
Tathmini ya matokeo
A pelt is completely dipped in tanning liquor as per required specifications.
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain how to:
- Prepare tanning liquor
- Conduct periodic tests
- Take precautions in the tan yard
- Treat tanning pelt in containers
- Prepare pelt
Principles: The student should explain the principles related to:
- Handling tan yard
- Handling vegetable tanned leather
- Handling tools and equipment
- Handling tannery chemicals and materials
- Using tannery beams
Theories: The student should explain:
- Ways of treating vegetable tanned leather
- Importance of precise and detailed work while performing vegetable tanning
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions pertaining to tanning process of vegetable tanning
- Safe handling of tanning materials, tools and equipment
- First aid
- Waste disposal
Swali
What is the purpose of dipping hides and skins in vegetable tanning?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado