Mada za sehemu hiiPerforming vegetable tanningMada 6
- Performing stage beams
- Preparing tanning liquor
- Dipping hides and skins
- Scraping hair side and flesh side
- Washing leather
- Fixing leather
Scraping is a critical step in vegetable tanning that removes unwanted tissues from both sides of the hide, preparing the leather for proper drying and finishing. During this process, the hair side (the outer surface where the animal's hair was) and the flesh side (the inner surface that was next to the animal's body) are treated differently using specific tools and techniques.
The main purposes of scraping are:
- To remove remaining flesh, fat, and connective tissues from the flesh side
- To thin and level the hide to an even thickness
- To open up the leather pores for better absorption of tanning agents
- To create a smooth, uniform surface on both sides
- To facilitate proper drying and prevent future defects
The flesh side is scraped first before the hair side. This side shows the raw, inner tissue that was attached to the animal's muscle.
Tools Used
- Tanning knife (bladesi)
- Curved panga
- Kitchen knife
- Workbench or leather horse
Procedure for Flesh Side
- Secure the hide — Place the wet hide on the workbench or leather horse with the flesh side facing upward.
- Hold the tool correctly — Grip the tanning knife firmly at an angle of about 30-45 degrees to the hide surface.
- Scrape in uniform strokes — Use long, even strokes moving from the center toward the edges of the hide.
- Apply moderate pressure — Enough to remove flesh and fat without tearing the hide.
- Remove all tissue — Continue until no fleshy material remains and the surface appears clean and even.
- Wipe clean — Remove debris with a hand broom or clean cloth.
After completing the flesh side, the hide is turned over so the hair side faces upward. The hair side has already been dehaired during earlier stages of tanning.
Purpose
- To thin the hide to desired thickness
- To remove any remaining loose fibers or superficial defects
- To create a smooth, even surface for finishing
Procedure for Hair Side
- Turn the hide — Place the hide with hair side facing up on the workbench.
- Use light pressure — The hair side is more delicate than the flesh side.
- Scrape gently — Apply short, controlled strokes to level the surface.
- Work systematically — Begin from one edge and move across the entire hide methodically.
- Check thickness — Ensure uniform thickness throughout by feeling with fingers.
- Final cleaning — Remove all loose particles with a hand broom.
- Always wear rubber gloves when handling raw hides
- Use safety boots to protect feet from dropped tools
- Wear overall or over coat to protect clothing
- Keep tools sharp — dull tools require more force and can slip
- Work in a well-ventilated area or working shade
- Handle knives and pangas with care to avoid cuts
- Scraping is done after the hide has been properly prepared through soaking and liming
- Both sides must be scraped evenly for quality leather
- The flesh side requires heavier scraping than the hair side
- Proper scraping ensures the hide dries flat and without curl
- The scraped hide is now ready for the next stage of tanning
- Keep the tanning knife blade at the correct angle throughout scraping
- Replace the blade when it becomes dull to avoid damaging the hide
- Work quickly while the hide is still damp, as dried hides are difficult to scrape
- Check your work by feeling the surface with clean hands
In Tanzania, small-scale tanners in rural areas such as those in Singida, Shinyanga, and Manyara regions use scraping techniques to process hides from local cattle, sheep, and goats. The finished leather is then sold to crafters who make sandals, belts, bags, and other items for sale at local markets like Kariakoo in Dar es Salaam or along roadside stalls in Arusha. A craftsman who understands proper scraping can produce higher-quality leather goods that command better prices, supporting a viable small business livelihood.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select material
- Select tools and equipment
- Inspect the pelt for quality
- Wash the pelt
- Handle tanning knives
- Use scraping knife
- Scrape hair side and flesh side of the pelt
- Observe safety
- Clean work place
- Clean tools and equipment
- Store pelt
- Store tools and equipment
Tathmini ya matokeo
A pelt is scraped hair side and flesh side as per required specifications.
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain how to use the scraping knife.
Principles: The student should explain the principles related to:
- Scraping hair side and flesh side of the pelt
Theories: The student should explain:
- Importance of scraping hair side and flesh side
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions pertaining to scraping hair side and flesh side
- Safe handling of tools and equipment
- First aid
- Waste disposal
Swali
Which side of the hide is scraped first during vegetable tanning?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado