Mada za sehemu hiiFatliquoring of leatherMada 3
- Making fat oil
- Applying fat liquor
- Performing conditioning of the pelt
Fat oil, also called fatliquor, is a special mixture of oils, fats, and water that is emulsified together to form a milky liquid. In leather making, fat oil is used to lubricate leather fibres, making the leather soft and flexible and a little more resistant to water. The names fat oil, fat liquor and fatliquor all mean the same thing.
During soaking, liming and tanning a skin loses most of its natural oils. If the tanned leather is then left to dry without oil, its fibres stick together and the leather becomes stiff and hard. Fat oil is worked into the damp tanned leather to:
- Lubricate the leather fibres so they move smoothly against each other
- Make the leather soft, pliable, and comfortable to use
- Prevent the leather from cracking or becoming brittle
- Add some degree of water resistance to the finished leather
- Improve the durability and lifespan of leather goods
Traditional fat oil in rural Tanzania can be made from locally available materials:
- Animal fats – such as sheep tail fat, goat fat, or cattle fat
- Vegetable oils – such as castor oil, palm oil, or coconut oil
- Emulsifying agents – such as soap (made from ash and oil) that helps mix oil and water
- Water – clean, warm water to create the emulsion. Rain water is best: hard or salty water makes the soap form scum and the emulsion breaks
- Soap-and-oil fat liquor – raw oil or melted fat beaten into warm soapy water. This is the type made by rural tanners.
- Egg-yolk fat liquor – egg yolk contains a natural oil and its own emulsifier. It is used for fine, soft skins.
- Factory-made fat liquors – oils that have been treated in a factory (sulphated or sulphited oils, such as sulphated castor oil) so that they mix with water without any soap.
- Fat liquors are also named after the oil they contain: animal (tallow, neatsfoot oil, fish oil), vegetable (castor, palm, coconut) or mineral.
- It is a smooth, milky emulsion with no oil floating on top
- It stays mixed long enough to be used
- Its oil droplets are fine enough to soak into the leather instead of lying on the surface
- It smells fresh, not rancid
- It leaves the leather soft but not greasy, with no dark, oily patches
- Working shade and a firm workbench
- Cooking pot and a source of heat for melting fat and warming water
- Plastic containers and buckets for measuring and mixing
- Cooking pestle or wooden stirring stick
- Kitchen knife or curved panga
- A scale or measuring jug, and a clean cloth for straining
- Rubber gloves, mask, overall or overcoat, and safety boots
Choose containers that are clean and free from rust. Rust (iron) makes black stains on vegetable-tanned leather, so plastic containers are best for mixing.
The amounts are estimated from the weight of the leather to be treated.
- Weigh the damp tanned leather.
- Oil: allow about 3 to 6 parts of oil or melted fat for every 100 parts of leather by weight. Use less for firm leather such as belt and sole leather, and more for soft leather for shoe uppers and bags.
- Water: allow about four times as much warm water as oil.
- Soap: allow about one part of soap to three parts of oil as a starting point.
Too little oil leaves the leather hard and likely to crack. Too much makes it greasy and dark, and glue and finishes will not hold on it. This is why careful measuring matters more than guessing.
Step 1: Gather and Prepare Ingredients
Collect fresh animal fat or obtain vegetable oil. If using animal fat, clean it by removing any meat or skin particles. Cut the fat into small pieces using a clean kitchen knife or curved panga.
Step 2: Render the Fat
Place the cut fat pieces in a clean container. The safest way to melt it is to stand the container in a larger pot of hot water. If the pot is heated directly, keep the heat low, never leave it unattended and keep water away from it: hot fat spits when water drops into it and can catch fire if it gets too hot. Stir continuously until the fat melts completely into a clear liquid. This process is called rendering. Let the melted fat cool a little, then strain it through a clean cloth to remove bits of skin. It should be warm but still liquid when it is used. Vegetable oil does not need rendering; simply warm it gently.
Step 3: Prepare the Emulsifier (Soap Solution)
Dissolve soap shavings or grated soap in warm water to make a soapy solution. The soap acts as an emulsifier that helps oil and water mix together properly. Use the amount of water you estimated, about four times as much water as fat. The water should be warm, about as hot as your hand can comfortably bear, and never boiling: a liquor that is too hot damages vegetable-tanned leather.
Step 4: Mix the Fat and Emulsifier
While the fat is still warm (liquid), slowly pour it into the soap solution while stirring vigorously. Keep stirring steadily until all the fat has been added. This creates an emulsion where tiny oil droplets are suspended in the water, forming a milky liquid.
Step 5: Process the Mixture
Beat the mixture hard with the cooking pestle or a wooden stirring stick for several minutes. Beating breaks large oil droplets into very small ones and gives a smoother, more stable emulsion. The mixture should become white and creamy like milk.
Step 6: Test the Fat Oil
A good fat oil should be:
- White or creamy white in colour
- Smooth with no visible oil separation
- Easy to spread on leather
To test it, stir a spoonful into a cup of clean warm water. It should spread into an even milky cloud. If oily drops float on top, add a little more warm soap solution and beat again.
Use the fat oil the same day, while it is still warm. Animal fat turns rancid quickly, so do not keep the mixture for long; put any small amount left over in a covered, labelled container in a cool place.
- Wear rubber gloves when handling fat liquor and tanned leather, and a mask when the work is smoky or dusty
- Thin rubber gloves do not protect against heat: lift hot pots with thick, dry cloths
- Wear safety boots and an overall or overcoat to protect clothing
- Work in a well-ventilated area or outside under a working shade
- Carry hot liquids slowly, in containers that are not too full, to avoid burns
- If fat catches fire, never throw water on it: cover the pot with a lid, or smother the flames with sand or a damp gunny bag
- Keep children and animals away from the fire and the hot pot
- Keep buckets and containers stable on a workbench or water horse
- Wash hands thoroughly with soap after handling animal fats
- Wipe up spilled fat at once; a greasy floor is slippery
- Burns and scalds: cool the burn under clean, cool running water for about 20 minutes. Remove rings or tight items near the burn and cover it loosely with a clean cloth. Do not put oil, butter, toothpaste or ash on it. Take the person to a health facility if the burn is large, deep or blistered.
- Cuts: wash with clean water, press with a clean cloth until the bleeding stops and cover with a dressing.
- Splashes in the eye: rinse with plenty of clean water for at least 15 minutes and get medical help.
- Report every injury to the person in charge.
- Wash pots, buckets, the pestle and knives with hot soapy water to remove all grease, then rinse and dry them
- Dry the knife and panga well, oil the blades lightly and store them in their place, out of reach of children
- Store containers upside down on a rack so they stay clean and dry
- Sprinkle ash or sawdust on greasy patches on the floor or bench, then sweep and scrub
- Do not pour leftover fat oil or greasy wash water into a stream, near a well or into an open drain. Soak it up with sawdust or ash and put it in the waste pit
- Bury scraps of skin and meat in the waste pit so they do not attract flies, dogs and rats
- Fat oil is an emulsion of oil, water, and emulsifier
- It makes leather soft and flexible
- The soap or emulsifier is essential to bind oil and water together
- Adding the warm fat slowly to warm soapy water while beating hard gives a stable emulsion
- Estimate the oil from the weight of the leather, and use about four times as much water as oil
- Always observe safety when making and using fat oil
A craftsman in Arusha wants to make fat oil for a batch of tanned goat skins that weighs 10 kg when damp.
- Oil: he decides on 4 parts of fat for every 100 parts of leather: 10 kg × 4 ÷ 100 = 0.4 kg, so he needs 400 g of goat fat.
- Water: four times the fat is 4 × 400 g = 1,600 g of water, so he warms about 1.6 litres of clean water.
- Soap: one part of soap to three parts of fat is about 130 g of soap shavings, which he dissolves in the warm water.
- He renders the fat, strains it and lets it cool until it is warm but still liquid.
- He pours the warm fat slowly into the soap solution, beating all the time with a cooking pestle, and carries on for about 10 minutes until the mixture is white and creamy.
- He stirs a spoonful into a cup of warm water. It spreads as a milky cloud with no oily drops, so the fat oil is ready to be worked into the leather to make it soft and supple for making shoes.
A small leather workshop in Mwanza can use homemade fat oil to treat leather before sewing it into sandals or bags for sale at local markets. By making their own fat oil from goat fat collected from local butcheries, they save money that would otherwise be spent buying commercial leather softeners. A pair of sandals treated with quality fat oil lasts longer and commands a better price, helping the artisan earn more income from their craft.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select material
- Select tools and equipment
- Estimate the amount of water
- Estimate the amount of liquid oil
- Prepare fat liquor
- Observe safety
- Clean work place
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
Fat oil with quality as per required standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Prepare fat liquor
Principles: The student should explain the principles of:
- Preparing fat oil
Theories: The student should explain:
- Types of fat liquor
- Characteristics of fat liquor oil
- Importance of precise and detailed work while preparing fat oil
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions pertaining to fat liquoring
- Safe handling of tanning materials, tools and equipment
- First Aid
- Waste disposal
Swali
Fat oil (also called fatliquor) is best described as:
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado