Mada za sehemu hiiSupervising corrective and preventive maintenanceMada 2
- Performing preventive maintenance of machines and equipment
- Performing corrective maintenance of workshop machines
Preventive maintenance means regularly servicing machines and equipment before they break down or wear out. Instead of waiting for a machine to fail, you clean, adjust, lubricate, and replace worn parts on a schedule. This keeps machines running smoothly, saves money on repairs, and prevents accidents in the workshop.
Maintenance is all the work done to keep tools, equipment and machines in safe, good working condition. There are two main types:
- Preventive maintenance — planned work done at set times before a fault appears, such as cleaning, oiling, adjusting and replacing worn parts
- Corrective (breakdown) maintenance — repair work done after a fault or breakdown has happened
Good preventive maintenance reduces the amount of corrective maintenance needed.
- Prevents costly breakdowns — fixing a small problem early stops it from becoming a big, expensive one
- Extends machine life — well-maintained machines last much longer
- Improves safety — faulty machines can injure workers; regular checks catch hazards early
- Maintains quality — machines in good condition produce better leather goods and footwear
1. Routine (Daily) Maintenance
These tasks are done every day before or after using machines:
- Wiping down machines to remove dust and leather scraps
- Checking for loose bolts or screws
- Removing visible debris from cutting blades and needle plates
- Ensuring the work area is clean and safe
2. Periodic (Scheduled) Maintenance
These tasks are done weekly or monthly:
- Lubricating moving parts such as bearings and gears
- Tightening loose connections
- Replacing worn belts, needles, or cutting edges
- Calibrating machines to maintain accuracy
3. Seasonal or Major Maintenance
These are done less frequently, such as every few months:
- Complete disassembly and deep cleaning by a trained technician
- Replacing major worn components
- Professional inspection and servicing
Follow these steps carefully each time you service a machine:
Step 1: Prepare the workspace and yourself
- Wear safety gear: overalls or apron, safety boots, gloves, safety glasses, and a mask if required
- Clear the work area of clutter
- Place a "Do Not Operate" tag on the machine you are servicing
Step 2: Gather tools and the service manual
- Collect general hand tools from your kit: screwdrivers, spanners, pliers, oil cans, brushes
- Find the machine's service manual — it shows which parts need attention and the correct way to service them
Step 3: Disconnect the machine from power
- Switch off the machine
- Unplug from the electricity supply or disconnect the power source
- This is the most important safety step — never skip it
Step 4: Inspect the machine visually
- Look for cracks, damage, loose parts, or signs of wear
- Check belts and hoses for cracks or fraying
- Examine electrical wires for exposed copper or damage
Step 5: Clean the machine
- Remove dust, leather scraps, and debris using brushes and cloths
- Clean cutting edges and needle plates with the cleaner recommended in the service manual, in a well-ventilated place away from flames
- Never use water near electrical components
Step 6: Lubricate moving parts
- Apply the correct lubricant to bearings, gears, and other moving parts
- Use only the type of oil or grease specified in the service manual
- Wipe away excess oil to avoid attracting dust
Step 7: Tighten and adjust
- Check all bolts, screws, and fittings; tighten any that are loose
- Adjust tension on belts if they are too loose or too tight
- Align blades, needles, or other cutting components as needed
Step 8: Test the machine
- Refit all covers and safety guards, and remove tools and rags from the machine
- Take off gloves and keep sleeves and hair away from moving parts
- Reconnect the power supply and remove the "Do Not Operate" tag
- Run the machine briefly at low speed
- Listen and watch for unusual sounds, vibrations, or movements
Step 9: Record the maintenance done
- Write down the date, what you serviced, and any parts you replaced
- This record helps track when the next service is due
Salum operates a small footwear workshop in Arusha. Every Friday afternoon, he follows a preventive maintenance routine on his band knife cutting machine.
First, Salum puts on his safety boots, gloves, and apron. He switches off the machine and unplugs it. He collects his toolkit and the service manual from the shelf.
Using the manual, he opens the guards and checks the blade tension — the manual says it should be firm but not over-tightened. Without touching the cutting edge, he looks along the blade for nicks, cracks or dull spots, and brushes leather dust from the blade guides and the rubber drive wheels. He does not take the blade off to sharpen it by hand: a band knife is sharpened by the machine's own grinding attachment with the guards closed, and a cracked or badly worn blade is changed by a trained technician.
Next, Salum lubricates the blade's guide and wheel bearings with a few drops of the oil named in the manual. He tightens all visible bolts with a spanner, checks the belt for wear, and finds it is still in good condition.
Finally, he closes the guards, plugs the machine back in, runs it for 30 seconds, and listens — the machine runs smoothly with no unusual noise. He records the date and work done in his maintenance logbook.
Because Salum maintains his machine regularly, it has not broken down in over two years, saving him the cost of repairs and lost working days.
A schedule is a table that says what must be done, how often, and by whom. Take the tasks and intervals from each machine's service manual, display the schedule near the machine, and tick each task when it is done.
| Machine | Task | How often | Done by |
|---|---|---|---|
| Sewing machine | Brush out dust under the needle plate; oil the marked points | Daily | Operator |
| Sewing machine | Check belt, needle bar and stitch settings | Monthly | Supervisor |
| Skiving machine | Clean the feed roll; check the bell knife and sharpening stone | Weekly | Operator |
| Clicking press | Check oil level, guards and two-hand controls | Weekly | Supervisor |
| All machines | Full service | As the manual states | Technician |
A schedule matters because nothing is forgotten, work is shared fairly, spare parts and oil can be bought in advance, and servicing can be planned for quiet times instead of stopping production.
Signs warn everyone while maintenance is going on and remind operators of the rules. Red signs mean stop or "do not" (for example the "Do Not Operate" tag), yellow signs warn of a hazard such as moving parts or a wet floor, blue signs show what must be done or worn, and green signs show safe things such as the first aid kit and exits. Make signs large and clear, fix them where the hazard is, and check during every inspection that they are still in place.
Preventive maintenance only works if every operator does the daily tasks. To plan a short training session, choose one machine and list its daily and weekly tasks from the schedule. Demonstrate each task with the power disconnected, let each person practise while you watch, and record who has been trained.
- Wipe tools clean and return them to the tool kit or rack; store oil cans upright and closed
- Put oily rags in a closed metal bin — a heap of oily rags can catch fire
- Collect used oil in a labelled container for proper disposal; never pour it on the ground or down a drain
- Put worn needles and blades in a strong closed tin
- Always disconnect power before opening or servicing any machine
- Wear the correct protective equipment at all times
- Never use damaged tools — replace worn or broken items immediately
- Keep the workshop floor dry to prevent slipping
- Follow the service manual exactly — do not guess if you are unsure
- General hand kit: screwdrivers, spanners, pliers, wire brushes
- Workshop tools: grinding stone, oil can, cleaning cloths
- Service manuals for each machine
- Safety gear: gloves, overalls/apron, safety boots, safety glasses, mask, ear plugs
In Tanzania, leather goods and footwear workshops are common in cities like Morogoro, Arusha, and Mwanza. A craftsman or woman who performs preventive maintenance on their sewing machines, skiving machines, and cutting equipment can avoid sudden breakdowns that stop production and lose income. For example, a shoemaker in Dar es Salaam who services their double-needle sewing machine weekly spends only a little on oil and replacement needles, but avoids a large repair bill if the machine seizes up due to lack of lubrication. This simple habit protects their investment and keeps their small business running profitably.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret service manuals
- Read and apply rules and regulations
- Prepare and apply workshop inspection report
- Prepare and use safety signs and color code
- Prepare and apply workshop preventive maintenance schedule
- Plan and conduct preventive maintenance training
- Clean tools and equipment
- Store tools and equipment accordingly
Tathmini ya matokeo
Preventive maintenance of tools, equipment, machines are performed as per workshop standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Prepare and apply workshop preventive maintenance schedule
- Plan and conduct preventive maintenance training
- Prepare safety signs and color code
- Correct handle tools and equipment safety
Principles: The student should explain the principles related to:
- Perform preventive maintenance of machines and equipment
Theories: The student should explain:
- The meaning of maintenance
- Types of maintenance
- Importance of preparing and applying preventive maintenance schedule
- Importance of preparing and use safety signs and color code
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions while planning preventive maintenance
- Safe handling of tools and equipment
- Waste disposal
Swali
What is the main purpose of preventive maintenance?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado