Mada za sehemu hiiCarrying out corrective maintenance of work toolsMada 4
- Refurbishing damaged work tools
- Servicing the workshop and work tools
- Replacing worn out parts of the tools
- Fabricating the cutting dies
Servicing the workshop and work tools means regularly cleaning, oiling, checking, and repairing them so they stay in good working condition. When tools are well maintained, they last longer, work better, and are safer to use. A poorly maintained workshop can cause accidents, produce low-quality work, and cost more money because tools must be replaced often.
Maintenance is all the work done to keep tools, machines and the workshop in good working condition, or to bring them back to that condition after a fault. It is different from manufacturing, which is making a new product, such as a belt or a shoe, from raw materials. Manufacturing produces goods for sale; maintenance keeps the tools used in manufacturing able to do their work.
There are two main kinds of maintenance:
- Preventive maintenance — regular cleaning, oiling and checking, done before anything goes wrong.
- Corrective maintenance — finding and repairing a fault after a tool has been damaged or has stopped working properly.
1. Preparation
Before servicing anything, gather all the materials you need:
- Cleaning materials (rags, brushes, soap)
- Lubricants (oil, grease)
- Service manuals (instruction books for tools)
- Personal protective equipment (gloves)
- Cupboards and shelves (for storing tools safely)
Always put on your gloves first to protect your hands.
2. Cleaning
Remove dust, dirt, and old leather scraps from:
- Your work bench surface
- Tool handles and metal parts
- Shelves and storage areas
- Floor around the work station
Use a brush to remove loose dirt, then wipe surfaces with a damp cloth. Dry metal tools straight away so that they do not rust.
3. Inspection
Check each tool carefully for:
- Cracks or breaks in handles
- Rust on metal parts
- Loose screws or fittings
- Dull or damaged blades and needles
This step helps you find problems early before they become dangerous.
4. Lubrication
Apply lubricant to moving parts such as:
- Hinges on tool boxes
- Joints and springs of revolving punches, pliers and scissors
- Threads of adjusting screws
A small drop of oil keeps metal parts working smoothly and prevents rust. Wipe off any excess so that it cannot stain leather.
5. Repair and Replacement
When a tool does not work well, first find the cause of the fault (this is called troubleshooting), then choose the right maintenance tool and repair it:
| Fault found | Likely cause | Repair | Maintenance tool or material |
|---|---|---|---|
| Knife tears the leather | Blunt or chipped edge | Sharpen the blade; replace it if it is badly chipped | Sharpening stone, oil |
| Hammer head moves on the handle | Handle has dried and shrunk, or the wedge is loose | Drive the wedge in again or fit a new handle | Hammer, wedge |
| Punch or pliers are stiff | Rust or dirt in the joint | Clean the joint, rub off the rust and oil it | Wire brush or fine abrasive paper, oil |
| Screw or bolt keeps coming loose | Vibration, or a worn thread | Tighten it; replace it if the thread is worn | Screwdriver or spanner of the correct size |
| Rust on metal parts | Tool stored damp or without oil | Rub the rust off, wipe clean and apply a thin film of oil | Abrasive paper, cloth, oil |
Work carefully and check the result: a repaired tool must work as well and as safely as before. Follow the service manual where there is one. If a tool is badly damaged and cannot be repaired safely, label it, keep it apart from the good tools and report it to your teacher so it can be replaced.
6. Storage
After servicing:
- Return all tools to their proper places on shelves
- Cover the edges of sharp tools and keep them in the cupboard
- Keep the work bench clean and organised
- Make sure the workshop floor is clear of scraps
- Always work in a well-ventilated area
- Never use damaged tools — report them immediately
- Wash your hands after handling lubricants and cleaning chemicals
- Keep lubricants away from open flames
- Put oily rags in a closed metal bin, and never pour used oil onto the ground or into a drain
Maria is a Form 1 student learning leatherwork. At the end of the week, she services her workstation:
- She sweeps leather scraps from the floor and wipes her work bench.
- She inspects her stitching needle — it is slightly bent, so she marks it to be replaced.
- She finds that her revolving punch is stiff. The cause is dirt and a little rust in the joint, so she cleans the joint, rubs off the rust and oils it with a drop of machine oil until it moves freely.
- She covers the edges of her sharp tools and places them in the cupboard.
- She records in her notebook which tools need replacement next week.
By servicing her tools regularly, Maria's tools will last the whole term and her workstation stays safe and organised.
Servicing the workshop and work tools involves cleaning, inspecting, lubricating, repairing, and storing tools properly. Doing this regularly keeps tools working well, prevents accidents, saves money, and helps you produce high-quality leather goods.
A shoemaker in Arusha uses the same servicing skills learned in the workshop to maintain his tools at home. Every Saturday morning, he cleans his cutting knives, oils his sewing machines, and organises his workbench before starting the week's orders. This regular maintenance helps him complete orders on time and avoids the cost of buying new tools often, saving him money that he can reinvest in buying leather for his small business.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Identify damaged work tools
- Troubleshoot and identify the source of tools breakdown
- Select the right work (maintenance) tools
- Repair the tools to their working state
- Store tools correctly
Tathmini ya matokeo
A workshop and work tools are serviced according to their specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Define maintenance correctly
- Distinguish manufacturing from maintenance
Principles: The student should clearly explain the principles involved in:
- The arrangement of tools in their right place
- Maintenance of tools
Theories: The student should clearly explain:
- The importance of maintenance
- The advantages of performing maintenance
- Different parts of tools and their functions
- Handling of tools in the workshop
- The importance of maintaining a clean and safe work environment
- The importance of precise and detailed work while maintaining tools
Circumstantial knowledge:
Detailed knowledge of:
- Proper handling of workshop tools
- Work safety health and environment
Swali
What is the purpose of servicing workshop tools?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado