Mada za sehemu hiiCarrying out corrective maintenance of work toolsMada 4
- Refurbishing damaged work tools
- Servicing the workshop and work tools
- Replacing worn out parts of the tools
- Fabricating the cutting dies
Replacing Worn Out Parts of the Tools
Worn out parts in workshop tools can cause accidents, reduce work quality, and damage expensive equipment. When tools are not properly maintained, they become unsafe to use and may produce poor results in leather goods and footwear work. Regular replacement of worn parts ensures that tools work efficiently and safely.
Before replacing any part, you must first identify which part is worn. Common signs of worn parts include:
- Physical damage: Cracks, chips, or broken pieces on cutting edges, needles, or blades
- Reduced performance: Tools that were once sharp now tear or damage materials
- Unusual sounds: Grinding, squeaking, or clicking noises during operation
- Excessive vibration: Tools shaking more than normal during use
- Visible wear: Smoothing of textured surfaces or thinning of material
1. Prepare the Work Area
- Clear the work bench of unnecessary items
- Ensure good lighting to see small parts clearly
- Place a clean cloth or cap board to hold small parts
2. Gather Necessary Tools and Materials
- Service manual for the tool
- Replacement parts (needles, blades, belts, or other worn components)
- Cleaning materials to clean the tool before and after replacement
- Lubricating oil if required
- Protective gloves
3. Ensure Safety First
- Disconnect power source before working on any tool
- Allow heated parts to cool if the tool has been in use
- Wear gloves to protect hands from sharp edges
4. Remove the Worn Part
- Follow instructions in the service manual
- Use appropriate tools to unscrew, unclip, or pull out the worn component
- Handle delicate parts carefully to avoid damaging surrounding areas
5. Inspect the Area
- Check for any damage to surrounding parts
- Clean the area where the new part will be installed
- Remove any debris or old lubricant
6. Install the New Part
- Place the new part in the correct position
- Secure it firmly using screws, clips, or appropriate fasteners
- Ensure proper alignment as shown in the service manual
7. Lubricate if Required
- Apply appropriate lubricant to moving parts
- Use only recommended lubricants from the service manual
8. Test the Tool
- Reconnect the power source
- Test the tool on scrap material first
- Check that it operates smoothly and safely
A Form 1 student notices their sewing machine is skipping stitches and leaving visible thread damage on leather pieces. Upon inspection, the needle has a visible bend and the tip is dull.
Step 1: The student disconnects the sewing machine from power and removes the presser foot.
Step 2: Using the needle clamp screw, the student loosens the screw and removes the worn needle.
Step 3: The student inserts a new needle, ensuring the long groove faces the thread spool correctly.
Step 4: The student tightens the needle clamp screw securely.
Step 5: The student reconnects power and tests the machine on a scrap piece of leather.
- Sewing machines: Needles, belts, bobbin case, feed dogs
- Skiving machines: Blades, rollers
- Roughing machines: Brushes, sanding discs
- Edge trimming tools: Replacement blades
- Cutting dies: Blades become dull over time
- Keep replacement parts in a clean, dry place on shelves
- Store small parts like needles in labeled containers
- Keep service manuals accessible for reference
In Tanzania, leather workers at markets like Mwenge in Dar es Salaam or along the Arusha-Moshi road regularly repair shoes and bags. When their sewing machines break down due to worn needles or belts, knowing how to replace these parts themselves saves time and money. A small shoe repair shop in Mwanza can continue serving customers quickly by replacing a dull skiving machine blade instead of waiting days for a technician or buying a completely new machine.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Identify the damaged work tools
- Troubleshot and identify the source of tools breakdown
- Select the right work (maintenance) tools
- Repair the tools to their working state
- Store tools correctly
Tathmini ya matokeo
Worn-out parts of the tools are replaced in their specific places
Tathmini ya maarifa
Knowledge Evidence: Detailed knowledge of:
Method used: The student should explain how to:
- Define maintenance
- Distinguish manufacturing from maintenance
Principles: The student should explain the principles involved in:
- Arranging tools in their right place
- Maintenance of tools.
Theories: The student should correctly explain:
- The importance of maintenance
- The advantages of performing maintenance
- Different parts of tools and their functions
- Handling of tools in the workshop
- The importance of maintaining a clean and safe work environment
- The importance of precise and detailed work while maintaining tools
Circumstantial knowledge:
Detailed knowledge of:
- Proper handling of workshop tools
- Work safety health and environment
Swali
Which of the following is a sign that indicates a tool part needs to be replaced?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado