Mada za sehemu hiiPerforming safe operation of workshop machinesMada 2
- Performing departmental separation of machines
- Operating footwear machines in the workshop
Operating footwear machines correctly is a core skill in leather goods and footwear making. In a workshop, machines help craftsmen stitch leather pieces together and thin the edges of leather for neat joins. Safe and proper operation protects you from injury and produces quality work.
Before operating any machine, you should know the main machines used in a footwear workshop:
- Sewing machine – joins two or more pieces of leather together using thread
- Skiving machine – thins or trims the edges of leather to make seams flat and neat
- Other machines may include clicking presses and edge-finishing tools
Always follow these safety rules in the workshop:
- Wear a mask to avoid inhaling dust or leather particles
- Wear closed shoes to protect your feet
- Keep the workshop bench clean and free of loose items
- Remove rings, bracelets, and loose clothing, and tie back long hair, before operating machines
- Keep all guards in place, and keep your fingers away from the needle, the knife and the belts
- Read the operation manual for each machine before use
- Never operate a machine if you are feeling tired or distracted
Read the signs on and around each machine before you use it:
- Red circle with a line across — something you must not do, such as "Do not operate without guard".
- Blue circle — something you must do, such as "Wear a mask".
- Yellow triangle — a warning of danger, such as electricity, a sharp knife or moving parts.
- Green rectangle — safety information, such as the first aid kit or the emergency exit.
- Red emergency stop button — press it to stop the machine at once if anything goes wrong.
A machine also gives its own danger signals: a burning smell, smoke, sparks, a new knocking or grinding noise, or strong vibration. If you notice any of these, stop the machine, switch it off at the socket and report it.
- Check that the machine is clean, the guards are in place and nothing is lying on it.
- Check that the cable and plug are not damaged. Connect the machine only to the power supply stated on its rating plate and in the operation manual, using an earthed socket.
- Sit comfortably on the workshop stool, with your foot resting beside the pedal, not on it.
- Switch on at the socket, then at the switch on the machine.
- Let the machine run empty for a moment before you put leather in it.
The speed of a sewing or skiving machine is controlled with the foot pedal: the further you press, the faster the machine runs. Practise pedalling on scrap leather until you can start gently, keep a steady speed and stop exactly where you want. Many motors also have a control that sets the highest speed; keep it low while you are learning.
- Use a slow speed for curves, corners, thick places and the start and end of a seam.
- Use a faster, steady speed only on long straight runs.
- To turn a sharp corner when sewing, stop with the needle down in the leather, lift the presser foot, turn the work, lower the foot and continue.
- On curves, turn the leather a little at a time with your hands flat on the work, well away from the needle or knife. Let the machine feed the leather; do not push or pull it.
The sewing machine is used to stitch leather parts together. Follow these steps carefully:
Step 1: Prepare the Machine
- Place the machine on a stable workshop bench
- With the power switched off, fit a leather needle and a thread of sizes that suit the thickness of the leather, and check that the needle is properly inserted and tightened
- Thread the machine following the threading diagram on the machine or in the operation manual
- Insert a bobbin with thread wound evenly
Step 2: Prepare the Leather
- Cut the leather pieces to the required shape using scissors or a knife
- Align the pieces together on a flat surface
- Hold the pieces in position with clips, tape or a thin line of adhesive. Do not use pins, because they leave permanent holes in leather
Step 3: Sew the Leather
- Place the leather under the presser foot
- Lower the presser foot gently
- Turn the hand wheel slowly to lower the needle into the leather
- Begin sewing by pressing the foot pedal gently
- Guide the leather steadily with both hands, keeping your fingers well away from the needle
- Finish the seam and stop with the needle at its highest position
- Lift the presser foot and remove the work
Step 4: After Sewing
- Cut the threads, leaving tails long enough to pull to the back and tie off, so that the seam cannot come undone
- Inspect the stitch for evenness and tightness
- Record any issues for maintenance review
The skiving machine thins the edges of leather so that seams lie flat. Follow these steps:
Step 1: Set Up the Machine
- Ensure the machine is firmly placed on the workshop bench
- Check that the blade is sharp and properly secured
- Set the presser foot and the edge guide for the thickness and width of skive your leather needs
- Refer to the operation manual for the correct settings, and test them on a scrap of the same leather
Step 2: Prepare the Leather
- Mark the edge of the leather that needs skiving
- Position the leather, grain (smooth) side up, on the machine's feeding table
Step 3: Skive the Leather
- Turn on the machine or engage the drive
- Feed the leather slowly into the machine, with its edge running against the edge guide
- Keep the leather flat and guide it with your fingertips, well away from the knife and the feed roller
- Stop the machine and check the thickness of the skived edge
- Adjust the presser foot if needed and repeat
Step 4: Finishing
- Inspect the skived edge for uniform thickness
- Remove the leather and set it aside for stitching
- Clean leather dust from the machine
Some workshops have a hydraulic cutting (clicking) press, which pushes a shaped press knife through the leather to cut out a part in one stroke. Students use it only under close supervision.
- Lay the leather on the cutting board and place the press knife on it, sharp edge down.
- Set the stroke and pressure as the operation manual says. The pressure is correct when the knife cuts cleanly through the leather and only just marks the cutting board. Too much pressure damages the knife and the board; too little leaves the part uncut.
- Swing the press head over the knife, take both hands away from the knife and press the two start buttons together. There are two buttons so that both hands are out of danger when the head comes down.
- When the head has risen, swing it away and remove the cut part and the knife.
After using any machine, keep it in good working condition:
- Switch off and unplug the machine before cleaning, oiling or changing a needle or knife
- Wipe down the machine with a clean cloth
- Apply a small amount of oil to moving parts as recommended in the manual
- Store spare parts like needles and bobbins in a labelled plastic container
- Report any unusual sounds or vibrations to your instructor
- Keep tools like screwdrivers, hammers, and scissors organised on the bench
- Check that moving parts run freely, without rubbing or rattling. Clearances are adjusted as the operation manual shows, with the power off
- Put leather shavings, thread ends and dust in the waste bin, and oily cloths in a closed metal container
- Know where the first aid kit is. For a small cut or needle prick, stop work, rinse the wound with clean water, cover it with a clean dressing and report it
Situation: A craftsperson needs to join two upper pieces of a shoe, the vamp (front) and the quarter (side), with an overlapping seam.
Step 1: The craftsperson cuts both leather pieces and marks the edges that will overlap.
Step 2: The marked edges are skived thin on the skiving machine, after the setting has been tested on a scrap of the same leather, so that the overlap will not be bulky.
Step 3: The skived edges are overlapped, held with a thin line of adhesive, and placed under the sewing machine presser foot.
Step 4: The machine is run at a slow, steady speed to stitch along the marked line. The seam is checked for even stitches and the thread ends are tied off.
This process shows how the skiving machine and the sewing machine work together to produce quality footwear: skiving comes first, so that the stitched seam sits flat and looks professional.
- Always know the function of each machine before using it
- Follow safety rules and wear protective gear like a mask
- Operate the sewing machine by threading, positioning leather, and guiding the material steadily
- Operate the skiving machine by setting the presser foot and edge guide and feeding leather evenly
- Clean and maintain machines after each use to keep them working properly
In Tanzania, many local cobblers and footwear artisans in places like Arusha or Mwanza use sewing and skiving machines daily to repair shoes and make custom leather sandals for sale in markets. A student who masters these machines can start a small cobbler business, earning income by stitching new soles onto worn shoes, applying the same safe operation skills learned in the workshop.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Start workshop machines
- Read and interpret danger signals and safety signs
- Connect to the recommended electrical power source
- Run safe and smooth operations
- Regulate motor speed
- Regulate the pressure of hydraulic cutting machines
- Set pressure and knife
- Adjust and lubricate machines
- Lubricate the workshop machines
- Adjust moving parts clearance
- Adjust pressure
- Clean tools and machines
Tathmini ya matokeo
Students are able to operate different machines in the workshop related to activities and specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should clearly explain how to:
- Lubricate and care for workshop machines
- Switch on machines
- Pedal skiving and sewing machines
- Maneuver with different shapes of materials
- Balance the machine speed
- Select materials.
Principles: The student should explain the principles involved in:
- Service workshop machines
- Adjust workshop machines
Theories: The student should clearly explain:
- Uses of skiving machines
- Uses of cutting machines
- Uses of sewing machines
- Service and repair of workshop machines
- Regulations on workshop machine operations
Circumstantial knowledge:
Detailed knowledge of:
- Observe safety precautions
- Safe handling of workshop machines.
- First aid
- Waste disposal
Swali
Why must rings, bracelets and loose clothing be removed before operating a sewing or skiving machine?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado