Mada za sehemu hiiCutting out materials using ready-made patternsMada 3
- Performing the cutting of leather
- Performing the cutting of fabric
- Performing the cutting of a reinforcement
Leather cutting is the process of shaping raw leather into pieces that will later be assembled into useful products such as wallets, bags, belts, and shoes. Using ready-made patterns helps students cut leather accurately and consistently, which is the foundation of good leathercraft.
Leather is a strong, flexible material made from animal hides and skins (such as cowhide, goatskin, or sheepskin) that have been treated through a process called tanning. Tanning preserves the hide and prevents it from rotting. In Tanzania, hides and skins come from local slaughterhouses and are turned into leather in tanneries. The leather is used by craftspeople to make footwear, bags, belts, and other goods sold in markets.
- Two sides: the smooth outer side is the grain side; the rough inner side is the flesh side.
- Uneven quality: the back (butt) of a hide is the thickest, firmest and best part. The shoulder is a little looser, and the belly and legs are thin and stretchy.
- Stretch: leather stretches more in one direction than in the other, and this direction changes from one part of the hide to another.
- Flaws: scars, scratches, insect bites, brand marks, holes and knife cuts from flaying are common. They must be kept out of the visible parts of a product.
- Every hide is different in size, shape, thickness and shade, so each one must be examined before patterns are laid on it.
A pattern is a template with the exact shape and size of one part of a product. Patterns make sure that every part is the right size, that the parts fit together, and that the same product can be made again and again.
- Types of patterns: a standard (master) pattern is the original, kept safe and used only for making copies; working (cutting) patterns are the copies used every day at the bench, one for each part of the product.
- Pattern materials: paper (cheap, for trials only), cardboard or pattern board (the usual choice), and plastic sheet or metal-edged board (for patterns used many times, because the knife does not wear down the edge).
- Reading a pattern: before cutting, read what is written or marked on each piece: the name of the part, the size, how many to cut, whether a left and a right are needed (a pair), the notches that show where parts join, and the holes or lines that show stitching, folding or the position of fittings.
Leather is cut in two main ways: hand cutting with a knife around a pattern, which is the method described here, and machine cutting, in which a press pushes a shaped knife through the leather.
Before starting any cutting activity, gather the following:
- Cutting knives – sharp blades used to cut through leather
- Ready-made patterns – paper or cardboard templates that show the exact shape and size of each piece
- Awl – a pointed tool used to mark or pierce holes in leather
- Pen or pencil – for tracing patterns onto leather
- Writing pad – for writing down the pieces to be cut, measurements and other notes
- Cutting blocks – thick boards of wood, rubber or plastic placed under the leather. The knife cuts into the block, so the bench is protected and the blade stays sharp
- Work bench and stools – a sturdy surface to work on
Safety Gear (Always Wear These)
- Safety gloves to protect your hands from cuts
- Safety boots to protect your feet
- Overalls or dust coat to protect your clothes
- Mask to avoid inhaling dust or leather particles
Follow these steps carefully to cut leather properly:
Step 1: Prepare the workplace Set up your work bench with all tools within reach. Place the cutting block on the bench and ensure you are wearing all safety gear.
Step 2: Select and prepare the leather Choose a piece of leather that is clean, dry, and free from cracks or damage. Check that the leather is the correct thickness for your project.
Step 3: Position the pattern Lay the ready-made pattern on the grain (smooth) side of the leather, so that you can see and avoid scars, holes and other flaws. Pull the leather gently to find the direction in which it stretches least, and place the pattern with its length in that direction; then the product keeps its shape. Use the firm leather from the back of the hide for the parts that take the most wear, and the looser belly and leg areas for small or hidden parts. Fit the pattern pieces close together, like a puzzle, to waste as little leather as possible. For parts that come in pairs (left and right), turn the pattern over to mark the second piece, and take both from places next to each other so that they match in colour and thickness. Hold the pattern down with your hand or a weight; do not pin it, because pin holes stay in leather.
Step 4: Trace the pattern Use a pen or the point of the awl to trace lightly around the edges of the pattern onto the leather. Keep the line fine and close to the pattern edge, because ink cannot be removed from the grain side. Then transfer the markings: prick lightly with the awl through the marking holes and notches of the pattern to show stitch lines, fold lines and the positions of holes. Do not prick holes along the outline itself.
Step 5: Cut along the marked line Hold the leather down firmly with your free hand, keeping your fingers behind the blade and out of its path. Hold the cutting knife firmly with the blade upright, so that the cut edge is square, and the handle leaning back towards you. Draw the knife towards you slowly and steadily along the traced line, in one smooth stroke where you can. On curves, turn the leather rather than twisting your wrist. Always cut on the cutting block, never directly on the bench.
Step 6: Check your cut After cutting, compare the leather piece with the pattern to ensure it matches the correct shape and size. Trim any excess material if needed.
Step 7: Pair and label the pieces Put left and right pieces together in pairs. Use a pen to label each cut piece on the flesh (rough) side (e.g., "upper," "sole," "heel") so you know where each piece belongs during assembly.
- Clean the materials: brush dust and scraps off the cut pieces and the remaining leather with a clean, dry cloth or soft brush.
- Store the materials: keep cut pieces flat, in sets, in a labelled tray or bag. Lay the remaining leather flat or roll it loosely; never fold it, because folds leave permanent creases. Keep it in a cool, dry place, off the floor and out of direct sunlight.
- Clean and store tools: wipe the knife, cover its blade, and return the knives, awl and cutting block to their places. Hang the patterns up or keep them flat so that they do not bend.
- Dispose of waste: sort the offcuts. Keep larger ones for small parts such as key holders and straps, and put small scraps in the waste bin. Do not burn leather scraps, because the smoke is harmful.
- First aid: if you cut yourself, stop work, press on the cut with a clean dressing from the first aid kit, then rinse and cover it, and report it. Get medical help if the cut is deep or keeps bleeding.
A student is making a simple cardholder wallet. They have a pattern for two identical rectangular pieces each measuring 10 cm by 7 cm.
- The student examines the grain side of the leather, finds a small scar, and pulls the leather gently to find the direction in which it stretches least.
- They lay the pattern clear of the scar, with its long side in the direction of least stretch, and trace around it with a pen. Then they move the pattern along and trace the second piece right beside the first, to save leather.
- Using a cutting knife, the student cuts along both traced outlines carefully.
- After cutting, both pieces match the pattern exactly. The student labels one piece "front" and one "back."
- Always cut on a cutting block or protective surface to avoid damaging your work bench.
- Keep the knife blade sharp — a dull blade requires more force and increases the risk of slipping and injury.
- Cut exactly along the traced line, on its inner edge, so that the piece is the same size as the pattern and not bigger.
- Keep your free hand behind the blade and out of its path.
- Work in a well-ventilated area and wear your mask to avoid inhaling leather dust.
- Never rush the cutting process; slow, steady cuts produce cleaner edges.
- Laying patterns without checking the direction of stretch or looking for flaws
- Skipping safety gear
- Using a dull or damaged knife
- Cutting without first securing the leather in place
A street vendor in Arusha who repairs shoes uses leather cutting skills daily. When a customer brings in worn-out shoes with damaged soles, the vendor carefully cuts new leather soles from a hide using a pattern, ensuring the new sole fits perfectly before stitching it onto the shoe. This skilled work earns the vendor an income that helps him support his family.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret patterns
- Select and prepare tools and equipment
- Select pattern pieces as per designs
- Layout patterns on leather
- Pin and cut out
- Transfer markings
- Trace leather
- Trace fabrics
- Cut leather
- Assemble in pairs
- Observe workshop safety
- Clean materials
- Clean tools and equipment
- Store materials
- Store tools and equipment
Tathmini ya matokeo
A piece of leather cut according to the required specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should clearly explain how to:
- Interpret patterns
- Select tools and equipment
- Select leather
- Layout patterns
- Cut leather
- Select materials
Principles: The student should explain the principles involved in:
- Cutting leather
- Laying patterns
- Tracing
Theories: The student should clearly explain:
- Types of patterns
- Characteristics of leather
- Cutting styles
- Types of pattern materials
- Uses of patterns
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions on cutting
- Safe handling of tools and equipment
- First aid
- Waste disposal
Swali
What is the smooth outer side of a piece of leather called?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado