Mada za sehemu hiiCutting out materials using ready-made patternsMada 3
- Performing the cutting of leather
- Performing the cutting of fabric
- Performing the cutting of a reinforcement
Cutting of fabric is the process of shaping flat pieces of fabric to follow the outline of a pattern. In leather goods and footwear making, accurate cutting ensures that all parts of a product fit together properly and look professional.
Fabric is a material made by weaving or knitting together fibres such as cotton, wool, silk, or synthetic materials. In the leather goods and footwear workshop, fabric is used for linings, for the uppers of canvas shoes, for bags, and for backing leather parts to strengthen them.
- Woven fabric has two sets of threads: the warp runs along the length and the weft runs across. The firm, finished edge along each side is the selvedge.
- Grain: fabric is firmest along the warp (the straight grain), gives a little across the weft, and stretches most on the bias (diagonally). Pattern pieces are normally laid with their length along the straight grain so that the parts keep their shape.
- Right and wrong side: the right side is the one that will show. Marking is done on the wrong side.
- Fraying: the cut edges of woven fabric lose threads, so cut pieces must be handled gently.
- Weight: canvas and drill are heavy and strong, good for shoe uppers and bags; thin cotton and synthetic fabrics are used for linings.
A pattern is a template with the exact shape and size of one part of a product. Using patterns means that every part is the right size, the parts fit together, and the same product can be made again and again.
- Types: the standard (master) pattern is kept as the original; working patterns are the copies used for cutting.
- Materials: paper, cardboard or pattern board, and plastic sheet for patterns that are used many times.
- Reading a pattern: look for the name of the part, the size, the number of pieces to cut, whether a left and right pair is needed, the arrow that shows the straight grain, and the notches and marks that show where parts join or fold.
Fabric can be cut by hand, with a knife or scissors around a pattern, or by machine, where a press knife cuts through several layers at once.
Before starting, gather all the following tools:
- Cutting knives – for cutting fabric along pattern lines on the cutting block; soft fabrics are also cut with sharp fabric scissors where these are available
- Cutting blocks – protective surface to cut on
- Patterns – paper templates showing the shape to cut
- Awl – a pointed tool for marking notches and small holes
- Pen or marker – for tracing patterns onto fabric
- Work bench – sturdy table for working
- Work stools – seating while working
- Writing pad – for noting the pieces to be cut and how many of each
Always wear protective equipment before cutting:
- Safety gloves to protect hands from cuts
- Safety boots to protect feet
- Overalls or dust coat to protect clothing
- Mask to avoid inhaling dust or fibres
Step 1: Prepare Your Work Area
Set up your work bench in a well-lit area. Place the cutting block on the bench to protect its surface.
Step 2: Select and Prepare the Pattern and the Fabric
Choose the correct pattern pieces for the item you want to make. Choose a fabric of the right type and weight, check it for flaws and stains, and smooth out any creases. Lay it flat on the bench, wrong side up, without stretching it. Place each pattern piece with its length along the straight grain (parallel to the selvedge), fit the pieces close together to save fabric, and secure them with pins or weights so they do not move.
Step 3: Trace the Pattern
Using tailor's chalk or a pen, carefully trace around the edges of the pattern onto the wrong side of the fabric. Mark any notches or special points indicated on the pattern.
Step 4: Check Your Traced Lines
Before cutting, double-check that all lines are drawn correctly and that you have marked all necessary notches. Mistakes at this stage are difficult to fix after cutting.
Step 5: Cut Along the Lines
Hold the fabric flat with your free hand, keeping your fingers behind the blade. Hold the cutting knife firmly. Cut along the traced lines, following the pattern outline exactly. Keep the blade perpendicular to the fabric for clean, straight edges. Use the cutting block to protect your work surface.
Step 6: Finish the Cut Pieces
After cutting, inspect each piece. Trim loose threads, put left and right pieces together in pairs, and stack the cut pieces in sets for the next stage of production.
- Assemble in pairs: match left and right pieces, check them against the pattern, label them on the wrong side and clip or tie each set together.
- Clean and store materials: shake or brush off loose threads. Fold the remaining fabric neatly, or roll it, and store it on a clean, dry shelf away from sunlight and damp. Keep useful offcuts for small parts.
- Clean and store tools: wipe the knife and cover its blade, collect every pin into its box, and return the patterns, awl and cutting block to their places.
- Dispose of waste: sweep up threads and scraps and put them in the waste bin. Do not burn synthetic fabric, because it gives off harmful smoke.
- First aid: for a small cut or pin prick, stop work, rinse the wound with clean water, press on it with a clean dressing from the first aid kit, cover it and report it.
A Form 1 student needs to cut out a simple shoe upper pattern.
- The student lays the shoe upper pattern on a piece of canvas, along the straight grain, and pins it securely.
- Using a pen, the student traces around the pattern edges and marks the heel notch.
- The student puts on safety gloves and mask.
- Carefully cutting along the traced line, the student produces a fabric piece shaped exactly like a shoe upper.
- The student turns the pattern over and cuts a second piece in the same way, so that there is a left and a right, then inspects the pair and sets it aside for assembly.
- Always cut on a cutting block to protect your work bench and keep your knife sharp.
- Cut slowly along curved lines rather than rushing — this gives better results.
- Never run with cutting knives or point them toward yourself or others.
- Keep your fingers away from the cutting line to avoid injury.
- Cutting without securing the pattern first, causing it to shift.
- Forgetting to wear safety gloves, leading to cuts.
- Rushing the cutting process and going off the traced line.
- Cutting without a protective cutting block, damaging the work bench.
In Tanzania, many tailors and craftspeople in local markets use fabric cutting skills to make bags, school backpacks, and simple shoes for sale. For example, a young entrepreneur in Arusha might cut fabric pieces using patterns to sew school bags, earning money by selling the bags. Learning to cut fabric accurately helps students develop skills they can use to start small businesses or assist in family craft enterprises.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Interpret patterns
- Select and prepare tools and equipment
- Select pattern pieces according to the designs
- Select and prepare fabric
- Layout patterns on fabrics
- Pin and cut out
- Transfer markings
- Trace fabrics
- Cut fabrics
- Assemble in pairs
- Observe workshop safety
- Clean materials
- Clean tools and equipment
- Store materials
- Store tools and equipment
Tathmini ya matokeo
A piece of fabric is cut according to required specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Interpret patterns
- Select tools and equipment
- Select fabric
- Layout patterns
- Cut fabric
- Select materials
Principles: The student should explain the principles involved in:
- Cutting fabric
- Laying patterns
- Tracing
Theories: The student should clearly explain:
- Types of patterns
- Characteristics of fabric
- Cutting styles
- Types of pattern materials
- Uses of patterns
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions on cutting.
- Safe handling of tools and equipment
- First aid
- Waste disposal
Swali
What is the main purpose of using a cutting block when cutting fabric?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado