Mada za sehemu hiiMaking simple designs of footwearMada 4
- Designing a simple derby shoe
- Designing a simple Oxford shoe
- Designing simple sandal
- Designing a simple training shoe
Designing Simple Sandals
A sandal is a light shoe with either an openwork upper or straps that attach the sole to the foot. It is considered the oldest and original type of shoe, with evidence of sandals found in various continents and cultures throughout history. The word "sandal" comes from the Greek word sandalon. Sandals are worn to protect the feet from environmental hazards and as a fashion item.
Designing sandals is less complicated than designing closed shoes like derby or oxford shoes. This makes sandals an excellent starting point for learners studying footwear design. Additionally, sandals are widely used in Tanzania for both everyday wear and cultural events, making this a practical skill.
The same tools used for designing derby and oxford shoes are used for designing sandals:
- Shoe last (sandal last is wider at the toe)
- Manila sheet (soft and hard)
- Masking tape
- Cutting knife
- Pencil and eraser
- Scissors
- Steel ruler (50 cm and 30 cm)
- Divider
- Awl
- Hammer
- Cutting board
- Workbench
- Measuring tape
- Marker pen
A sandal last is specifically designed to be wider at the toe than other shoe lasts. This allows flexibility for the feet because sandals are open-toe shoes. The wider design ensures comfort when walking and accommodates the natural spread of toes.
Step 1: Select the Sandal Last
Choose a sandal last of the appropriate size. Remember that the sandal last should be wider at the front to allow foot flexibility.
Step 2: Cover the Shoe Last with Masking Tape
Cover the shoe last according to your design. Important: Do not cover the entire shoe last if the sandal upper part consists of straps. Only cover the areas where the straps will actually cover. This prevents unnecessary use of materials.
Step 3: Remove Excess Materials
Carefully remove any excess materials found on the shoe last, leaving only the covered areas that form your design.
Step 4: Design the Sandal
Draw or sketch your sandal design on the covered last. Consider the strap placement and overall style according to the specifications provided.
Step 5: Cut the Pattern
Remove the masking tape from the shoe last and attach it to a manila sheet, or cut directly from the shoe last and add the required allowances. Cut the master pattern from a hard manila sheet.
Step 6: Grade and Label the Pattern
If needed, grade your pattern to create different sizes. Label the pattern with the article number and size, then store it in an envelope or designated place for future use.
Suppose you want to design a simple two-strap sandal for a size 42 shoe:
- Select a sandal last (size 42, wider at toe)
- Apply masking tape only where the heel strap and toe strap will sit — do not cover the entire foot area
- Remove excess tape from between the strap positions
- Draw the strap lines connecting the heel to the toe area on both sides
- Transfer to manila sheet by pressing the tape onto the sheet
- Cut the pattern adding 5mm allowance around all edges
- Label: "Sandal Pattern — Size 42 — Two-strap design"
From what you have learned, you can now answer these questions:
- Why is a sandal last wider at the front? To allow flexibility of the toes because sandals are open-toe shoes.
- What accessories can decorate a sandals? Buckles, studs, decorative buttons, or embroidered patterns.
- Why should you only cover the strap areas when applying masking tape? To avoid unnecessary usage of materials and ensure accurate pattern creation.
- Sandals are the oldest type of footwear, featuring openwork uppers or straps
- The sandal last is wider at the toe for foot flexibility
- The design process follows six main steps: select last, cover with tape, remove excess, design, cut pattern, and grade/label
- Only cover areas where straps will actually sit, not the entire last
In Tanzania, sandals are commonly worn for everyday activities, religious gatherings, and cultural ceremonies. A small-scale shoe maker in Arusha or Dar es Salaam can use these design skills to create custom sandals for local markets, selling pairs at prices ranging from TZS 15,000 to TZS 50,000 depending on materials and design complexity. This skill also helps tailors and craftspersons add footwear design to their service offerings, increasing their income potential.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret different designs correctly
- Select appropriate tools and equipment
- Take measurements of sandal designs correctly
- Select the right materials
- Produce basic sketches correctly
- Transfer sketches into soft manilla sheets
- Cut master pattern from hard manilla sheets
- Grade patterns
- Label patterns
- Identify marking points
- Analyse the patterns and sort them out
- Store patterns
- Clean tools, equipment and machines
- Observe safety precautions
- Store tools and equipment
Tathmini ya matokeo
Sandals are designed to meet the standards specified
Tathmini ya maarifa
Knowledge Evidence:
Detailed knowledge of:
Method used: The student should correctly explain:
- The concept of open shoe design
- Make patterns for simple sandals
- Interpret measurements correctly
Principles: The student should explain correctly the principles of:
- Taking measurements
- Sketching and making patterns
- Cutting patterns
- Grading patterns
- Labeling patterns
Theories: The student should correctly explain:
- Types of pattern materials
Circumstantial knowledge: Detailed knowledge of:
- Safe handling of work tools and equipment
- Safety precautions when making simple shoes
Swali
Why is a sandal last designed to be wider at the front (toe) than other shoe lasts?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado