Step 1: Visit and Prepare
Under the guidance of your teacher, visit a nearby abattoir or slaughter facility where bled cattle, sheep, or goats are available for practical work. Put on all required protective gear before handling any animals.
Step 2: Prepare Tools
Sharpen the scalping knife using the sharpener. A sharp knife makes clean cuts and reduces physical effort. Ensure all other equipment is ready and in good condition.
Step 3: Position the Animal
Position the bled animal in a way that makes the head easily accessible. Use the hoisting device to lift the animal if necessary so that you can work on the head comfortably without straining.
Step 4: Scalp the Head
Make a thorough cut around the neck, severing the muscles, connective tissues, and the first cervical vertebra (the atlas bone). This completely separates the head from the body. After cutting, submit the head for further processing, which may include removing the tongue, cheek meat, and brains, depending on market demands and cultural practices.
Step 5: Cut Front Legs
Cut the front legs (shanks) at the knee joint. This separates the lower part of the front leg from the rest of the carcass.
Step 6: Cut Hind Legs
Partially skin the hind legs, then cut them at the hock or ankle joint. This removes the lower part of the hind legs along with any remaining hair or dirt.
Step 7: Submit Parts for Processing
Place the detached heads, legs, and removed skins in the designated area or room for further processing. These by-products may be collected separately for commercial use.
Step 8: Clean and Store Tools
After completing the scalping work, wash all tools and equipment thoroughly using clean water. Sterilize the knives and other implements to prevent contamination. Store them properly in a safe, dry place.