Mada za sehemu hiiDressing bled animalsMada 8
Perform Dehairing of Pigs
Dehairing (also called scraping) is the process of removing hair from a bled and scalded pig. This is an important step in pig dressing because hair left on the carcass makes the meat unsuitable for consumption. In Tanzania, dehairing is done both manually and using machines, depending on the size of the slaughter facility.
Dehairing (scraping): It is the process of removing hair from a bled and scalded pig. After scalding, the hair becomes loose and can be scraped off using special tools.
Stubble: This means short hair that remains on the scraped surface of pigs after the initial scraping. Stubble must be removed to achieve a clean carcass.
Singeing: It means passing a flame lightly over the surface of the pig's body to burn the remaining hair and stubble. This can be done using a gaseous torch or a singeing machine.
Advantages
- Cost-effective and affordable for small-scale farmers
- Does not require expensive machines or electricity
- Can remove hair from difficult areas such as the head, feet, and tail
- Suitable for both urban and remote locations where electricity may be unreliable
Disadvantages
- Labour intensive and time consuming
- Requires significant physical effort, especially when processing many pigs
- May result in uneven appearance if not done carefully
- Can cause cuts or abrasions on the pig's skin if tools are sharp or handling is rough
Before performing dehairing, prepare the following:
- Protective gear: Cap or helmet, gum boots, plastic overall/gown, white coat/t-shirt/shirt, plastic apron, iron gloves
- Dehairing tools: Oval pig scraper, round pig scraper, electric toe scraper, knives, panga, razor blade, brush
- Other equipment: Sterilizer, large container, working table, thermometer, hooks, hot water (60°C to 65°C)
- For singeing: Singeing machine, gas cylinder, torch
Follow these steps carefully:
-
Prepare the working area by putting on appropriate protective gear and ensuring all tools are clean and ready.
-
Scald the pig by heating water to a temperature between 60°C and 65°C. Submerge the bled pig in hot water for about 3 to 5 minutes. The hot water helps loosen the hair follicles. If submerging is difficult, cover the pig with a sack and pour hot water over it.
-
Test readiness by gently pulling a few hairs. If they come out easily, the pig is ready for scraping. If not, dip it in the water for another 3 minutes.
-
Start scraping by withdrawing the pig from the scalding water. Use a scraping tool or dull knife to scrape small sections at a time, working from the head towards the back. This direction follows the natural lay of the hair and ensures complete removal.
-
Remove stubble by using a razor blade to scrape any remaining short hair on the surface.
-
Singe remaining hair by using a torch or singeing device to burn off any leftover hair and stubble.
-
Rinse the pig by scrubbing with a brush and clean water to wash away loose hair, dirt, or residues.
-
Submit the de-haired pig for evisceration.
In larger slaughterhouses, singeing machines are used instead of manual scraping. The process involves passing the scalded pig through a flame chamber where any remaining hair is burned off. This method is faster and produces a cleaner finish, but requires equipment and gas supply.
A student at Mbeya Vocational Training Centre visited a local pig slaughter slab. After scalding a pig at 62°C for 4 minutes, the student tested by pulling hair from the leg — it came out easily. Using an oval scraper, the student worked from the head toward the back, scraping in small sections. After removing most hair, the student used a torch to singe stubble, then rinsed the carcass with clean water. The clean carcass was then submitted for evisceration.
In Tanzania, small-scale pig farmers in regions like Mbeya, Iringa, and Mwanza often sell their pigs at local markets or slaughter slabs. Knowing how to properly dehair a pig ensures the meat meets hygiene standards and can be sold at market. A farmer who dehairs pigs correctly can demand a better price because buyers prefer clean, hair-free carcasses. Additionally, individuals running small meat businesses in town markets use these skills to prepare pork for sale to customers.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Organize work tools, equipment, utensils and safety gear
- Stun and bleed pig
- Prepare scalding water
- Immerse bled pigs in scalding
- Perform dehairing
- Perform singeing
- Observe health precautions
- Clean tools, equipment, and workplace
- Store tools and equipment
- Keep record
Tathmini ya matokeo
Dehairing of pi performed as per the required standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The students should explain how to perform dehairing of pigs
Principles: The explain the principles related to the dehairing process
Theories: The explain:
- Procedure of dehairing pigs
- Methods of
- Types of dehairing machines
- Benefits of machine dehairing Circumstantial knowledge about:
- Anatomy of the gastrointestinal tract
- Temperatures required for scalding of different species
Swali
What is the recommended water temperature range for scalding pigs before dehairing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado