Mada za sehemu hiiFabricating farm equipmentMada 4
- Fabricating feeders and water trough
- Fabricating nests and cages
- Fabricating yoke and skey
- Fabricating brooder
Fabricating Yoke and Skey
A yoke and skey are essential tools used in draught animal power systems for farming or transportation. They harness draught animals like oxen to pull ploughs, carts, or other equipment. The yoke fits around the animal's neck to distribute the load comfortably, while the skey is a wooden bar that connects the yoke to the equipment being pulled.
Materials and Tools Required
- Wooden planks or logs (hardwood preferred)
- Metal pins, nails, or bolts
- Leather straps or strong cord
- Saw, plane, drill, and chisels
- Ruler, tape measure, and callipers
- Sandpaper or file
- Varnish or wood sealant
Procedure for Making a Yoke
Step 1: Select suitable wood Choose strong and flexible hardwood such as oak or ash for durability.
Step 2: Measure and shape the yoke The yoke should be approximately 1.3 metres long, depending on the size of the animal. Shape it with a slight curve to match the animal's neck—the ends must curve inward so they sit comfortably against the neck without causing injury.
Step 3: Drill holes for the crossbar Drill holes on both sides of the yoke where the crossbar will attach. The crossbar is typically 30–60 cm in length.
Step 4: Attach the crossbar Fasten the crossbar securely between the two curved ends using wood nails, pins, or large screws.
Step 5: Add leather straps Attach adjustable leather straps or strong cords to the ends of the yoke for securing it around the animal's neck. The straps must allow adjustment for a comfortable fit.
Step 6: Finish the yoke Sand or file all edges to remove rough spots that could injure the animal. Optionally apply varnish or wood sealant for protection.
Procedure for Making a Skey
Step 1: Select suitable wood Use strong and durable wood that can withstand pulling forces.
Step 2: Measure and cut the skey The skey should be approximately 1.8–2.4 metres long—long enough to connect the yoke to the equipment. Cut to the appropriate length and shape.
Step 3: Drill attachment holes Drill holes at both ends of the skey where it will connect to the yoke and to the equipment (plough or cart).
Step 4: Attach to the yoke Fasten one end of the skey to the yoke using a metal pin, bolt, or nail.
Step 5: Connect to equipment Attach the other end of skey to the plough or cart being pulled.
Step 6: Reinforce if necessary Add cross braces or supports for extra strength if needed.
Step 7: Finish the skey Smooth all edges with sandpaper and apply a protective finish.
Worked Example: Yoke Dimensions for Local Oxen
A farmer in Singida needs to make a yoke for two oxen that will pull a plough. Based on the standard requirements:
- Yoke length: 1.3 m (allows both oxen to work together)
- Crossbar length: 45 cm (fits between the two neck curves)
- Curve depth: approximately 10 cm inward (matches neck shape)
The farmer selects hard wood, cuts the main beam to 1.3 m, curves both ends, drills two holes for the 45 cm crossbar, fastens the crossbar firmly, adds adjustable leather straps at both ends, and sands all surfaces smooth. This yoke can now be fitted to the oxen for ploughing.
Real-life application
A small-scale dairy farmer in Mwanza with two oxen can fabricate their own yoke and skey using locally sourced timber instead of buying imported equipment. This saves money—commercial yokes cost around TSh 50,000–80,000 while local materials may cost only TSh 15,000–25,000—and the farmer can adjust the yoke specifically to fit their animals, improving comfort and work efficiency during ploughing or cart transport.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select work tools, equipment, and safety gears
- Design farm equipment
- Fabricate farm equipment as per design
- Keep different records
- Clean tools, equipment used and work place
- Store tools and equipment
Tathmini ya matokeo
Yoke and skey fabricated as per the required standards of livestock keeping.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should elaborate how to fabricate yoke and skey
Principles: The student should state the principles involved in fabricating yoke and skey
Theories: The student should :
- Describe the advantages of using fabricated equipment’s
- Explain how to design yoke and skey
- Elaborate fabricated materials
Swali
What is the approximate length of a yoke used for draught oxen?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado