Mada za sehemu hiiConserving pastures and crop residuesMada 3
- Making hay
- Making silage
- Preserving crop residues
What is Hay Making?
Hay making is the process of harvesting, drying and storing grass or other forage plants (such as legumes) to conserve them as animal feed for use during the dry season when fresh pasture is not available. It converts green, perishable forage into a product that can be safely stored for several months without spoilage while retaining most of its nutritional value.
Types of Hay
Standing hay refers to forage that is left standing in the field after reaching maturity, rather than being cut and dried immediately. Farmers may use it later by cutting it when needed for feeding.
Harvested hay is forage that has been cut, dried in the sun, and stored in a barn or shed for later use. This is the most common type of hay used by farmers.
Procedure for Making Hay
1. Selecting the Right Forage Species
Choose forage species that have a high leaf-to-stem ratio because leaves contain more nutrients and are more digestible than stems. Both grasses and legumes can be used for hay making, but grasses are easier to handle due to their lower moisture content and ease of drying. Examples of suitable grasses include Rhodes grass, Guinea grass, and Napier grass.
2. Selecting the Right Time to Harvest
The best time to harvest forage for hay making is during the early to mid-flowering stage:
- For grasses: Harvest at about 10% bloom stage
- For legumes: Harvest during full flowering stage
This is when the forage has maximum nutrient content. After this stage, nutrient content decreases. For grasses, lignin content increases, reducing digestibility. For legumes, leaves may shed as the plant matures.
Important: Plan your hay cutting when you expect at least 3 to 5 sunny days to ensure faster drying and better-quality hay. Avoid cutting on wet fields; if necessary, move the cut grass to a specially prepared shed for drying.
3. Cutting the Forage
For smallholder farmers, forages can be cut using a cutlass, sickle, or scythe. Larger farms may use tractor-driven mowers or forage harvesters. After cutting, spread the forage out in thin layers in the field to allow rapid drying in the sun.
4. Drying
Freshly harvested forage contains about 70–90% moisture. This must be reduced to 15–20% for safe storage. The quicker this moisture is removed, the better the hay quality will be.
- Field drying depends on sunshine, humidity, and wind intensity
- Turn the hay over frequently, especially in the early hours of the morning, to speed up drying
- Properly dried hay should be crisp and brittle, not soft or damp
5. Baling
Baling involves gathering and compressing dried hay into compact units for easier transport, storage, and portioning. On larger farms, machines are used to create standardized bales of about 14–16 kg each. On small-scale farms, hay can be baled using wooden boxes or simple manual presses. At the village level, some farmers store loose hay piled in barns, though this is not ideal because it occupies too much space.
6. Storage
Hay must be stored in dry conditions to prevent molding and nutrient loss:
- Store in a barn or shed
- If kept outside, cover with waterproof canvas or thick plastic sheets, starting from the bottom to prevent groundwater from seeping in
- When well protected, hay can be stored for several months without losing much nutritional value
Example: Calculating Hay for One Cow
A farmer has a 250 kg cow that consumes fresh forage equal to 5% of its body weight daily. If the desirable utilization rate is 50%, how many days can harvested forage last?
Step 1: Calculate daily fresh forage requirement 250 kg×5%=12.5 kg/day
Step 2: Account for utilization rate If only 50% of the forage is usable, the farmer needs to harvest twice the amount: 12.5 kg÷50%=25 kg/day
Step 3: Determine available forage From Activity 3.6 in the textbook, students harvested forage from a 25 m² plot. If the group found, for example, 100 kg of fresh forage from their plot, then: 100 kg÷25 kg/day=4 days
This shows how hay making helps plan feed supply during dry seasons.
Real-life application
In Tanzania, smallholder dairy farmers in areas like Kilimanjaro and Mbeya commonly face feed shortages during the dry season from June to October. By making hay during the rainy season from November to May, a farmer can store enough feed for their 2–3 dairy cows and sell any surplus hay to neighboring farmers for around TSh 5,000–10,000 per bale, generating additional income while ensuring their animals remain healthy and productive throughout the year.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select work tools, equipment, farm machinery and safety gears
- Identify right harvesting stage of grass for hay
- Harvest grasses
- Bail hay
- Keep different records
- Clean tools, equipment used and workplace
- Store tools and equipment
Tathmini ya matokeo
Hay made according to the required standards of pasture conserving.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should be able explain how to make hay
Principles: The student should state principles involved in making hay
Theories: The student should:
- Highlight the importance of preserving hay
- Identify suitable crops for hay making
- Enumerate factors for consideration before harvesting crop for making hay
- Articulate the nutritive value of hay
- Identify types of hay
Circumstantial knowledge: Detailed knowledge about
- Environmental awareness on fire application
Swali
What is the main purpose of making hay?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado