Mada za sehemu hiiConserving pastures and crop residuesMada 3
- Making hay
- Making silage
- Preserving crop residues
Silage is fermented, high-moisture fodder made from crops like maize, grasses and legumes. It is used as animal feed during times when fresh pasture is unavailable, such as the dry season. The process involves preserving plant material through fermentation in an oxygen-free (anaerobic) environment, typically in a silo or similar structure. This fermentation retains the nutritional value of the plants while reducing spoilage, making silage an effective way to store forage for later use.
Silage making is important because:
- It provides nutritious feed for livestock during dry seasons when fresh pasture is scarce
- It preserves the nutritional value of forages that would otherwise be lost
- It reduces waste of surplus forage crops
- Fermented silage is palatable and digestible for ruminants
- It allows farmers to store large amounts of feed in a small space
The quality of silage depends on selecting the right forage crops. The forage must contain:
- Adequate carbohydrates in the form of readily available sugars
- Moisture content of 55-70% (dry matter content of 30-45%)
Common Fodders Used for Silage in Tanzania
Grasses:
- Maize
- Sorghum bicolor (grain sorghum)
- Sorghum sudanense (Sudan grass)
- Pennisetum purpureum (Napier grass/elephant grass)
- Panicum maxima (Guinea grass)
- Tripsacum laxum (Guatemala grass)
Legumes:
- Alfalfa
- Desmodium
- Stylosanthes
- Caliandra
Legumes can be used alone or combined with grasses to make good quality silage. Desmodium, Stylosanthes and Caliandra are particularly valuable because they tolerate drought and establish easily in semi-arid areas.
Harvesting at the correct growth stage is essential for good quality silage. The forage should contain about 55-70% moisture.
Maize
Harvest when seeds are at the "milk stage" going towards the "dough stage" of maturity. This stage has 65-70% moisture (30-35% dry matter). Under proper growth conditions, this occurs about 2-3 weeks after the black layer forms on the kernel.
Sorghum
Harvest at the soft-dough point of maturity, about 15-25 days after flowering has started. At this point, sorghum has 25-30% dry matter. To test readiness, squeeze the grain between your fingers — no milky liquid should come out. The plant would have lost several lower leaves at this stage.
Napier Grass
Harvest about 70-90 days after planting or 45-65 days after re-growth from previous cutting. Key indicators include:
- Height of 0.6-1.2 meters
- High leaf to stem ratio
- Initial stages of flowering
Desmodium
Harvest when the crop is between vegetative and flowering stage, around 6-12 weeks after planting. Cutting is best when flowering has reached 50-70%. Key indicators include:
- Height 60-90 cm tall
- High leaf to stem ratio
- Just before full flowering bloom
A simple field test to determine correct moisture level is the grab-n-squeeze technique:
- Grab a handful of freshly chopped forage and squeeze it for about 30 seconds to form a ball
- Release the ball and observe:
- If the ball remains rounded and your palm feels wet → too wet, needs more wilting
- If the ball crumbles immediately → too dry, may need additives like molasses
- If the ball holds briefly and then falls apart slowly → ready for ensiling
- Harvest using hand tools (sickle, scythe, cutlass) or tractor-powered forage harvesters for large-scale operations
- Leave harvested materials in the field to wilt for 2-4 days depending on weather conditions
- Turn the materials over frequently to shorten wilting time
- Cut in late morning and early afternoon for higher sugar content
The forage should be chopped into small pieces approximately 2.5-5 cm long. Chopping makes it easier to compact the materials, helps remove air pockets and increases surface area for fermentation.
Key Principles
- The silo must be fully sealed, not allowing air or moisture to enter
- Forage materials must be well compacted as they are filled into the silo
- Effective compaction is critical to achieve anaerobic conditions for successful fermentation
Additives That Can Be Used
- Molasses (to add sugars for fermentation)
- Toxin binder (anti-fungal)
- Urea (for nitrogen enrichment)
- Multi-mineral powder
Method 1: Small Pits or Trenches
This is common for small to medium-scale operations.
- Choose a site with easy drainage
- The pit can be lined with plastic sheeting or plastered with cement
- Line the pit floor and sides with plastic sheet, extending sides about three-quarters of the width for overlap wrapping
- Spread forage in thin layers of no more than 15 cm
- Compact thoroughly before adding each new layer
- Add silage additives as needed
- After filling, cover with plastic sheet and seal with soil
- Shape the top like a dome to allow rainwater to run off
- Place heavy objects on top to prevent wind from blowing away the covering
A general guideline is to project about 400 kg of dry matter per cubic meter of silo volume.
Method 2: Plastic Barrels or Buckets
This is popular among smallholders keeping less than 10 cows.
- Chop materials and mix with additives
- Fill into barrels or plastic buckets
- Compact by foot pressing or using heavy objects
- Punch a small hole at the bottom for drainage of excess silage effluent
- Keep the hole plugged most of the time, unplug occasionally to release effluent
Well-fermented silage should have:
- pH of 3.8-4.2
- Pleasant, appetizing fruity smell
Poor quality silage will have:
- pH higher than 4.5
- Putrid smell above pH 5.0
Causes of Poor Quality Silage
- Low soluble sugar content
- Poor compaction
- Dry matter content beyond 45%
If you have a dairy cow weighing 250 kg and you want to prepare silage for the dry season:
Step 1: Estimate daily feed requirement A dairy cow consumes fresh forage equivalent to about 5% of its live weight. Daily fresh forage = 250 kg × 5% = 12.5 kg
Step 2: Estimate silage needed If you want to feed for 90 days (dry season): Total silage needed = 12.5 kg × 90 days = 1,125 kg of fresh silage
Step 3: Estimate land needed Average maize yields about 10 tons of silage from 20 tons of crop per hectare. To get 1,125 kg, you would need approximately 0.01 hectares of maize for silage.
A smallholder dairy farmer in Morogoro can make silage from Napier grass or maize to feed their 5 cows during the June-August dry season when pastures are scarce. By preparing silage in a simple pit or plastic barrels, the farmer can maintain milk production throughout the year rather than experiencing the usual drop in yield during the dry months. This practice directly supports food security and income generation, as a dairy cow producing 15 liters of milk daily can earn around TSh 30,000 per day at TSh 2,000 per liter.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select work tools, equipment, farm machinery and safety gears
- Identify right harvesting stage of grass for silage making
- Identify suitable crop residues
- Harvest grasses
- Make trench
- Make silage
- Keep different records
- Clean tools, equipment used and workplace
- Store tools and equipment
Tathmini ya matokeo
Silage made according to the required standards of pasture conserving.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should be able explain how to make silage
- Principles: The student should explain principles involved in making silage
- Theories: The student should :
- Describe the importance of preserving silage
- Identify suitable crops for silage making
- Numerate factors for consideration before harvesting crop for silage
- Elaborate the nutritive value of silage
- Explain the fermentation process in silage making
Swali
What is the primary purpose of making silage for livestock?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado