Mada za sehemu hiiHarvesting water for irrigationMada 3
- Performing surface water harvesting
- Performing underground water harvest
- Performing roof tapping
Surface water harvesting is the process of collecting water that flows on the land surface—rainwater runoff, water from rivers or streams, or floodwater—and storing it for later use in irrigation. This collected water can be stored in ponds, tanks, or small dams and used during dry seasons when rainfall is not available.
Surface water harvesting uses different materials and tools to collect, move, clean, and store water. The main ones include:
- Collection channels: Earth, concrete, or plastic channels that guide rainwater into storage areas
- Inlet screens: Metal or plastic mesh covers that stop leaves and debris from entering the system
- Storage tanks or ponds: Structures made of earth, plastic, metal, or concrete that hold collected water
- Lining materials: Clay or plastic sheets placed inside ponds to prevent water from seeping into the soil
- Filters: Gravel and sand filters that clean water by removing dirt and particles
- Pumps: Hand pumps, solar pumps, or electric pumps that lift water from storage to the garden
- Pipes and taps: PVC or metal pipes that carry water to where it is needed
- Maintenance tools: Water testing kits, brushes, and cleaning agents
When harvesting surface water, follow these key principles:
-
Identify good water sources: Choose appropriate sources such as rain runoff from land, small rivers, or floodwater. Use channels to direct water into storage areas.
-
Use proper collection structures: Build simple structures like trenches, bunds (raised barriers), or check dams to slow down water flow and direct it into storage.
-
Store water safely: Build ponds, tanks, or small dams to hold water. Line them with clay or plastic sheets to prevent leakage.
-
Help water soak into the ground: Dig small holes called soak pits or shallow recharge pits near collection points. These allow water to seep slowly into the ground and refill underground water sources.
-
Keep water clean: Ensure the collection area is free from trash and chemicals. Use sand or gravel filters to remove dirt before storing water.
-
Maintain the system regularly: Clean ponds or tanks, remove silt, check for leaks, and repair damaged parts.
-
Work together as a community: Community participation helps protect sources, maintain the system, and share water fairly.
Follow these steps to collect and store surface water for irrigation:
-
Choose a good site: Select a place where water naturally runs off. Consider soil type, land slope, and water quality.
-
Estimate the amount of water: Determine the size of the catchment area (the area that collects and directs water to storage). Larger catchments collect more water.
-
Build a collection channel or storm ditch: Construct a trench or channel to carry water into the storage area using locally available materials like soil, stones, or concrete.
-
Construct a storage pond or tank: Build a pond or tank large enough to hold the estimated water amount. Line it with clay or plastic sheets to prevent leakage.
-
Install filters and screens: Use sand or gravel filters and screens to remove soil, leaves, and dirt before storage.
-
Install pipes or pumps: Set up pipes to carry water from storage to crops. Use pumps to push water through pipes, especially over long distances or uphill.
-
Monitor and maintain the system: Check regularly for leaks, clean filters, and maintain channels and storage structures.
A farmer in Morogoro wants to harvest surface water from a catchment area of 500 m² during the rainy season. The average rainfall during the season is 800 mm (0.8 m). The efficiency of the collection system is 0.85 (85%), and water losses are 3%.
Step 1: Calculate potential water collected
Potential water=Catchment area×Rainfall×Efficiency
Potential water=500 m2×0.8 m×0.85=340 m3
Step 2: Calculate losses
Losses=0.03×340 m3=10.2 m3
Step 3: Calculate actual harvested water
Actual harvested water=340−10.2=329.8 m3
Therefore, the farmer can harvest approximately 329.8 cubic metres (329,800 litres) of water during the rainy season.
Surface water comes from both natural and man-made sources:
Natural sources:
- Rivers and streams – flowing water that can be collected or stored
- Natural lakes and ponds – hold water for harvesting
- Rainwater collected from roads and open ground
- Floodplains – low-lying areas where water gathers after heavy rain
Man-made sources:
- Dams and reservoirs – built across rivers to store large amounts of water
- Man-made ponds – constructed to hold water for irrigation
- Canals and irrigation channels – carry water from rivers or reservoirs to farms
Surface water harvesting provides many benefits:
- Provides water for irrigating crops during dry seasons
- Allows regular watering of seedlings and mature plants, improving growth and yields
- Saves energy and money by reducing the need to pump water from distant sources
- Helps control soil erosion by slowing down fast-moving water that washes away topsoil
- Promotes sustainable horticultural farming with clean water
The quality of harvested water affects crop health and productivity. Good quality water helps plants grow well, while poor-quality water can harm crops and reduce soil fertility.
Before using harvested water, check if it is clean. Contaminated water may contain too much salt, harmful microbes, or chemicals that affect plant growth. Signs of poor water quality include bad smell, abnormal colour, or poor crop performance. Simple testing can be done in water laboratories, or you can use simple water-testing kits to check pH and other properties.
A small-scale vegetable farmer in Mbeya can use surface water harvesting to collect runoff from their 200 m² farm shed and surrounding compacted ground during the rainy season. By digging a 10 m³ lined pond and directing water through a simple sand filter, the farmer can store enough water to irrigate tomatoes and peppers during the dry season, reducing the need to buy water from tankers at approximately TZS 50,000 per delivery and ensuring consistent crop production throughout the year.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools and equipment
- Determine pH, turbidity and amount salinity
- Determine amounts of physical and chemical impurities
- Determine the crop to be grown
- Determine soil types
- Make water storage facilities
- Maintain water storage facilities
- Estimate quantity of water
- Observe safety precaution
- Clean the tools and equipment
- Store the tools
Tathmini ya matokeo
Surface water harvested according to water rules and regulations knowledge evidence
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to harvest surface water
Principles: The student should explain the principles of Harvesting surface water from different sources
Theories: The student should explain:
- Importance of surface water harvesting
- Sources of harvested water
- Methods of harvesting surface water
- Surface runoff water harvesting
- Determination of quality harvested surface water
Circumstantial knowledge:
Detailed knowledge about:
- Suitable methods of harvesting water
- Regulations of water bodies and rules for water harvesting
Swali
Which of the following is NOT a natural source of surface water for harvesting?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado