Mada za sehemu hiiHarvesting water for irrigationMada 3
- Performing surface water harvesting
- Performing underground water harvest
- Performing roof tapping
Performing Underground Water Harvest
Underground water harvesting is the process of collecting and using water that is stored beneath the ground surface. This water, called groundwater, seeps into the soil through layers of sand, gravel, or rock and collects in underground reservoirs called aquifers. Harvesting groundwater helps horticultural farmers get a reliable water supply during dry seasons when rainfall is low or unreliable.
Groundwater forms when rainwater or surface water slowly soaks into the ground. It moves downward through soil particles until it reaches a layer of permeable rock or gravel where it collects. This saturated underground layer is called an aquifer. Aquifers can hold large amounts of water that can be brought to the surface through wells, boreholes, or springs.
Natural springs occur where underground water naturally flows out onto the surface through cracks in rocks or soil. Springs are common in hilly or mountainous areas and usually flow without needing pumps.
Before harvesting groundwater, farmers must follow important principles to ensure the water remains safe, reliable, and sustainable.
-
Protect the environment during harvesting – Wells and boreholes should be dug carefully to prevent erosion, protect vegetation, and avoid polluting nearby water sources.
-
Balance extraction with natural recharge – Water should not be taken out faster than it can be replaced by rainfall. If too much water is extracted, aquifers can dry up and wells may stop producing water.
-
Prevent water contamination – Underground water must be kept clean. Wells should be covered, and dirty water, chemicals, and waste should be kept away from water sources.
-
Choose proper location – Wells and boreholes should be placed far from toilets, animal sheds, rubbish pits, or areas where harmful waste is dumped. This reduces the risk of contamination.
-
Ensure safety and easy maintenance – Wells should be covered or fenced to prevent accidents, especially for children. The system should be simple enough to maintain using locally available tools.
-
Check water quality before use – Test the water for pH and contamination before using it for irrigation. This ensures the water does not harm crops, soil, or people.
There are four main methods used to harvest groundwater for horticultural purposes.
Shallow Wells
Shallow wells are hand-dug wells that collect water from aquifers close to the surface. They are commonly used in rural areas where the water table is high, such as near rivers or low-lying areas.
Steps for constructing a shallow well:
- Choose a location where the water table is shallow, such as near a river or low-lying area.
- Dig a wide hole straight down until you reach water. The depth depends on the season and water table level.
- Build a lining inside the well using bricks or stones to prevent walls from collapsing and to reduce contamination.
- Install a lid or cover at the surface to keep out animals, dirt, and rubbish.
- Use a rope and bucket or a simple hand pump to draw water.
Materials and tools needed: spade, shovel, rope, bucket, bricks or stones, cover lid, and optionally a hand pump.
Borehole Wells
Boreholes are deep, narrow wells drilled using machines to reach water stored in deep aquifers. They are suitable where the water table is too low for hand-dug wells and provide a reliable water supply during long dry periods.
Steps for constructing a borehole:
- Hire professionals to survey the land and locate suitable underground water sources.
- Use a drilling machine to make a deep hole until the aquifer is reached.
- Insert casing pipes (PVC or metal) to prevent the borehole from collapsing and to keep the water clean.
- Fix a pump (manual or electric) to draw water to the surface.
- Test the water for pH and contaminants before using it for irrigation.
Materials and tools needed: drilling rig, casing pipes, hand pump or electric pump, water testing kit.
Springs
Springs occur where underground water naturally flows out onto the surface. The water usually flows without pumping, making it an easy source to harvest.
Steps for harvesting water from springs:
- Find a clean and reliable spring that flows all year round.
- Use pipes to direct water into a tank or container.
- Fence the area around the spring to prevent animals and unauthorized people from entering.
- Maintain cleanliness – do not farm, build toilets, or dump rubbish near the spring.
Materials and tools needed: plastic or metal pipes, storage tank, fencing materials.
Infiltration Galleries
Infiltration galleries are underground channels built near rivers or lakes to collect water that seeps through soil, sand, and gravel. The water is naturally filtered as it passes through these layers.
Steps for constructing an infiltration gallery:
- Dig a shallow trench along the riverbank or near the lake.
- Fill the trench with sand and gravel to filter the water.
- Place perforated pipes inside the trench to collect and carry filtered water.
- Direct the collected water into a clean storage tank for farming use.
- Perform regular maintenance by checking pipes and cleaning sand and gravel if blocked.
Materials and tools needed: spade, hand hoe, sand, gravel, perforated pipes, storage tank.
Groundwater harvesting provides many benefits for horticultural farming in Tanzania:
- Reliable supply during dry periods – Groundwater is available even when rainfall is low or irregular.
- Supports irrigation – Provides water for crops when surface water sources are limited or unavailable.
- Reduces pressure on surface water – Less demand on rivers, ponds, and lakes.
- Clean and safe water – When properly constructed and protected, underground water is usually clean and safe for irrigation.
- Improves food security – Helps maintain crop production throughout the year.
A farmer digs a shallow well with a diameter of 1.2 meters and a depth of 4 meters. The well is filled with water up to 3 meters. Calculate the approximate volume of water in the well.
Solution:
The well is cylindrical in shape. The volume of water is calculated using the formula:
Volume=π×r2×h
Where:
- r = radius = diameter ÷ 2 = 1.2 ÷ 2 = 0.6 m
- h = height of water = 3 m
Volume=3.14×(0.6)2×3 Volume=3.14×0.36×3 Volume=3.39 cubic metres
To convert to litres: 3.39×1000=3,390 litres
Therefore, the well contains approximately 3,390 litres of water that can be used for irrigation.
During a field visit, students should:
- Measure the depth of the well using a plumb bob and tape measure.
- Identify the possible water source by observing nearby features like rivers or vegetation.
- Note the method used to draw water (bucket, rope, pump).
- Record any protective structures (fence, cover) that help keep water clean.
- Observe the surrounding environment for potential contamination sources.
Reflection questions:
- How does the depth of the well affect water quality and reliability?
- What clues in the surrounding environment helped identify the water source?
- How effective are the protective structures in preventing contamination?
In many Tanzanian villages, smallholder farmers rely on shallow wells to irrigate their vegetable gardens during the dry season. For example, a farmer in Morogoro Region who grows tomatoes and onions can use water from a hand-dug well to keep crops alive when rains stop. By following proper well-construction steps and protecting the water source from contamination, the farmer can maintain vegetable production throughout the year and sell the harvest at local markets to earn income.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools and equipment
- Determine pH, turbidity and salinity levels
- Determine amounts of physical and chemical impurities
- Determine the crop to be grown
- Determine soil types
- Make water storage facilities
- Maintain water storage facilities
- Estimate quantity of water
- Observe safety precaution
- Clean the tools and equipment
- Store the tools and equipment
Tathmini ya matokeo
Underground water harvest performed according to water rules and regulations knowledge evidence
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should be able to explain how to harvest underground water
Principles: The student should explain the principles of harvesting underground water from different sources
Theories: The student should explain:
- Importance of underground water
- Sources of harvested water
- Methods of harvesting underground water
- Determination of quality of harvested water
Circumstantial knowledge:
Detailed knowledge about:
- Suitable methods of harvesting water
- Regulations of water bodies and rules for water harvesting
Swali
What is groundwater?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado