Mada za sehemu hiiPerforming irrigationMada 3
- Performing furrow/surface irrigation
- Performing sprinkler irrigation
- Performing drip irrigation
Furrow and surface irrigation are methods of applying water to crops by spreading it over the soil surface. These techniques rely on gravity and the natural flow of water to moisten the root zone of plants. Farmers in Tanzania use these methods to supply water to horticultural crops when rainfall is insufficient.
Furrow irrigation involves creating small, parallel channels (furrows) between crop rows. Water flows along these channels and soaks into the soil laterally, wetting the plant roots. This method works well for crops planted in rows such as tomatoes, cabbages, and peppers.
Surface irrigation is a broader method where water is applied directly to the soil surface and flows across the field by gravity. It includes:
- Border irrigation – Water flows between raised borders or strips
- Basin irrigation – Water is held in flat, enclosed areas around plants
- Flood irrigation – Water is released to cover the entire field surface
- It is cheap to set up: the main needs are a water source, hand tools and labour.
- It needs no pump or fuel where the water source is higher than the field.
- It is simple to operate and repair with local skills.
- Furrow irrigation keeps water off the leaves and fruit, which helps to reduce leaf diseases in crops such as tomatoes.
Its limits are that it uses more water than drip irrigation, needs land that is fairly level or evenly sloping, takes much labour, and can cause erosion or waterlogging if the flow is not controlled.
Before performing furrow or surface irrigation, gather these tools and materials:
- Water storage facilities (tanks, ponds, or reservoirs)
- Hose pipes or PVC pipes for transporting water
- Hand hoes for shaping furrows and levelling the soil
- Watering cans for small-scale application
- Furrow or irrigation canals for directing water flow
- Filters to prevent blockage of pipes
- Screwdriver and spanner for pipe maintenance
- Safety gear: gum boots and overalls
Step 1: Prepare the Land
Use a hand hoe to create furrows between crop rows. The furrows should be shallow, about 10–15 cm deep, and should run down a gentle, even slope so that water flows steadily without washing soil away. Make the ridges between the furrows the same height, and keep each furrow short enough for water to reach its end.
Step 2: Set Up Water Source and Channels
Connect hose pipes or PVC pipes from the water storage facility to the field. Install filters at the pipe openings to prevent soil and debris from causing blockages. Use a screwdriver and spanner to secure pipe connections properly.
Step 3: Pre-Soak the Soil
Before planting or during dry periods, apply an initial amount of water to moisten the soil. This helps the soil absorb water more evenly during irrigation.
Step 4: Apply Water to Furrows
Open the valve to allow water to flow through the hose pipes into the furrows. Monitor the water as it moves along the channels. Let the water run until it has almost reached the lower end of the furrow, then reduce or stop the flow so that it soaks in without overflowing. Plants at the far end must receive as much water as those near the inlet. Block the lower end of the furrow with soil so that water is not lost.
Step 5: Control Water Flow
Regulate the water flow using the valve or by creating small earthen embankments in the furrows. This prevents water from flowing too fast (which washes soil away and causes runoff and uneven wetting) or too slowly (so that the water soaks in near the inlet and never reaches the plants at the far end).
Step 6: Monitor and Adjust
Check the soil moisture around the plant roots regularly. Adjust the frequency and duration of irrigation based on crop needs, weather conditions, and soil type.
Step 1: Create Basin Areas
Use a hand hoe to form flat, circular or rectangular basins around individual plants or groups of plants. Each basin should be surrounded by a small earthen wall about 10 cm high.
Step 2: Connect Water Supply
Direct water from a hose pipe or watering can into each basin. The basin holds the water, allowing it to soak slowly into the root zone.
Step 3: Fill and Allow Infiltration
Fill the basin with water until it reaches about two-thirds of the basin wall height. Allow the water to stand until it fully infiltrates into the soil.
Step 4: Repeat as Needed
Feel the soil a few centimetres below the surface and water again when it begins to dry. How often this is depends on the weather, the crop and the soil: sandy soils need water more often than clay soils.
Water for surface irrigation is usually stored before use. Common storage facilities are:
- Dams and ponds – earth structures that collect river or rain water
- Tanks – plastic, concrete or metal tanks, often raised so that water flows out by gravity
- Wells and boreholes – water is lifted from underground and held in a tank
- Night-storage reservoirs – small reservoirs that fill at night and are emptied onto the field by day
A canal carries water from the source to the field. To construct a simple earth canal:
- Choose a route from the source to the top of the field that falls gently and evenly all the way.
- Mark the route with pegs and string.
- Dig the channel with sloping sides, wider at the top than at the bottom, so that the sides do not collapse.
- Use the dug soil to build up and compact the banks.
- Where the soil is sandy and water seeps away, line the canal with clay, stones and mortar, concrete or a plastic sheet.
- Make small openings where water turns into each furrow or basin, and close them with soil, a board or a sandbag.
- Canals and furrows: remove weeds, silt and rubbish regularly; repair leaks, cracks and broken banks as soon as they are seen; reshape furrows that have filled with soil.
- Storage facilities: check tanks, ponds and dam walls for leaks and cracks and repair them; clean silt, leaves and algae out of tanks; keep tanks covered and ponds fenced.
- Pipes and fittings: take out and wash filters; flush hose pipes and PVC pipes with clean water; tighten loose joints with the screwdriver and spanner and replace worn washers.
- Tools: wash soil off hand hoes and watering cans, dry them and oil the metal parts.
- Storing: drain hose pipes, coil them without kinks and hang them up; stack PVC pipes flat on racks in the shade, because sunlight makes them brittle; keep small fittings together in a box; lock everything in a dry store.
Irrigation water is usually shared, so every user must follow the rules of the scheme or water users' group:
- Take water only on your turn and for the agreed time, then close your inlet.
- Do not block, break or divert a canal that serves other farmers.
- Do not wash sprayers, pesticide containers, clothes or animals in canals or storage ponds.
- Join in the shared work of cleaning and repairing the canals.
- Taking water from a river or other natural source needs permission from the relevant water authority.
- Always wear gum boots and overalls when working with water and soil
- Check that all pipe connections are secure before opening water valves
- Avoid working in waterlogged areas to prevent slipping
- Handle tools like hoes carefully to avoid injury
- Do not wade barefoot in canals, ponds or standing water; such water can carry diseases such as bilharzia, so wear gum boots and wash with clean water and soap after work
- Never drink irrigation water
- Take care near deep ponds, tanks and dams, and keep small children away from them
A farmer in Morogoro grows tomatoes in rows spaced 60 cm apart. During a dry season, the farmer decides to use furrow irrigation. He uses a hand hoe to create furrows 12 cm deep between each row. He connects a hose pipe from his water tank to the field and filters the water before allowing it to flow into the furrows. The water flows along the furrows and soaks into the soil, providing moisture to the tomato roots. By checking the soil moisture every two days, the farmer finds that on his soil he needs to irrigate about every five days to keep his crops healthy.
- Furrow and surface irrigation rely on gravity to distribute water
- Proper land preparation ensures even water distribution
- Water flow must be controlled to prevent runoff and ensure deep soaking
- Regular monitoring helps determine the right irrigation schedule
- Safety gear protects the farmer during irrigation work
A small-scale vegetable farmer in Arusha growing cabbages and carrots uses furrow irrigation during the dry season to supplement rainfall. By shaping furrows between the crop rows and directing water from a nearby storage tank, the farmer ensures his crops receive adequate moisture to grow well and reach the market on time. This method is affordable because it uses minimal equipment and relies on natural gravity rather than expensive pumps.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Organise working tools, equipment and machineries
- Perform furrows/surface irrigation
- Maintain irrigation tools, equipment and machineries
- Maintain water storage facilities
- Maintain irrigation canals
- Observe safety precautions in handling tools and equipment
- Clean irrigation facilities
- Store irrigation facilities
Tathmini ya matokeo
Furrow/surface irrigation are designed according to the required horticultural crop practices
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to carry out furrow/surface irrigation
Principles: The student should explain the principles of Irrigating field/farms.
Theories: The student should explain:
- Importance of furrow/surface irrigation method
- Type of water storage facilities
- How to construct irrigation canals
Circumstantial knowledge: Detailed knowledge about observing farm/field irrigation facilities rules and regulations
Swali
What is furrow irrigation?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado