Mada za sehemu hiiControlling insect pestsMada 6
Biological Control of Insect Pests
Biological control is a method of managing insect pests using living organisms rather than chemical pesticides. This approach uses natural enemies like predators, parasites, and pathogens to reduce pest populations to manageable levels. Biological control is environmentally friendly, safe for humans, and helps maintain ecological balance in farmland and storage facilities.
Biological control is the use of living organisms (biological agents) to suppress or reduce the population of harmful insect pests. Unlike chemical pesticides, biological control works with nature to keep pest numbers low enough to prevent economic damage to crops.
1. Predators
Predators are organisms that hunt and kill insect pests directly. Examples include:
- Ladybirds (lady beetles) – feed on aphids, whiteflies, and scale insects
- Praying mantises – eat various insects including caterpillars and beetles
- Lacewings – larvae feed on aphids, mealybugs, and thrips
- Ground beetles – hunt soil-dwelling pests like cutworms
2. Parasitoids
Parasitoids are organisms that lay eggs inside or on pest insects. The developing larvae eventually kill the host. Examples include:
- Trichogramma wasps – parasitize eggs of stem borers and other caterpillars
- Aphidius – parasitizes aphids
- Braconid wasps – attack caterpillars and beetle larvae
3. Pathogens
Pathogens are disease-causing microorganisms that infect and kill insect pests. These include:
- Bacteria – Bacillus thuringiensis (Bt) kills caterpillars
- Fungi – Beauveria bassiana infects various insects
- Viruses – nuclear polyhedrosis viruses control caterpillars
The following insect pests commonly affect crops in Tanzania and can be controlled biologically:
| Pest | Crops Affected | Type of Damage |
|---|---|---|
| Stem borers | Maize, sorghum, rice | Internal stem feeding |
| Aphids | Vegetables, cereals | Sucking sap, virus transmission |
| Whiteflies | Tomatoes, beans, cotton | Sucking sap, honeydew |
| Caterpillars (armyworms) | Maize, millet, vegetables | Leaf eating |
| Weevils | Stored grains, maize | Internal grain damage |
| Thrips | Onions, tomatoes, beans | Sucking sap, scarring |
The following equipment is needed for biological control operations:
- Protective gear: Overalls, gum boots, caps, masks
- Biological agents: Predators, parasitoids, or pathogen preparations
- Application tools: Containers, sprayers, dusters
- Measuring equipment: Weighing balance, measuring cylinders
- Carrier materials: Water, cereals bran (for distributing agents)
- Field or storage facility: Crop field or grain store with pest problems
Before applying biological agents, you must calculate the correct amount needed.
Example: Calculating Bt (Bacillus thuringiensis) Dose
Suppose you need to apply Bt to treat a maize field of 1 hectare (10,000 square meters) and the recommended rate is 1 liter of Bt solution per 400 square meters. The concentrate requires dilution at a ratio of 1:10 (1 part concentrate to 10 parts water).
Step 1: Calculate total liters of dilute solution needed
Total solution=400 m2/L10,000 m2=25 L
Step 2: Calculate amount of Bt concentrate needed
Using ratio 1:10, total parts = 11 Bt concentrate=1125 L≈2.27 L
Step 3: Calculate water needed
Water=25 L−2.27 L=22.73 L
So for 1 hectare, you need approximately 2.3 liters of Bt concentrate mixed with about 22.7 liters of water.
Step 1: Identify the Pest
Correctly identify the insect pest affecting the crop. Different pests require different biological control agents.
Step 2: Select the Appropriate Biological Agent
Choose a natural enemy that targets the identified pest. For example, use Trichogramma wasps for stem borer eggs, or ladybirds for aphids.
Step 3: Prepare the Application Material
- If using pathogens (fungi or bacteria), mix with water or carrier materials
- If using predators, prepare containers for release
- If using parasitoids, prepare emergence cards or material for distribution
Step 4: Calculate and Measure the Dose
Determine the correct amount based on field size and agent recommendations.
Step 5: Apply the Biological Agent
- For predators and parasitoids: Release at recommended rates across the affected area
- For pathogens applied as spray: Spray evenly on affected plants
- For stored grain protection: Mix bran-based pathogen preparations with grain
Step 6: Monitor Results
Observe the crop after 7-14 days to check if pest populations are decreasing. Do not apply chemical pesticides after biological agents, as this will kill them.
- Wear protective clothing (overalls, gum boots, caps, masks) when handling biological agents
- Wash hands after handling biological control materials
- Store biological agents properly according to instructions
- Do not eat or smoke while applying biological control agents
- Environmentally friendly – does not harm non-target organisms
- Safe for humans – no toxic chemical residues
- Sustainable – natural enemies establish and provide long-term control
- Cost-effective – reduces dependence on expensive chemical pesticides
- Compatible with organic farming – meets organic certification requirements
In Tanzania, smallholder farmers growing maize in regions like Morogoro or Mbeya can use biological control to manage stem borers, which cause significant crop losses. By releasing Trichogramma wasps in their maize fields, farmers can reduce stem borer damage without spending money on expensive chemical insecticides. This method also protects the quality of stored grain, ensuring better market prices and less post-harvest loss when selling maize at local markets like those in Dodoma or Iringa.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- The student should be able to:
- Select tools, materials, equipment and machines
- Select biological agents
- Identify types of insect pests relevant to biological control
- Apply biological control to insect pests
- Observe safety precaution
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
Biological control of insect pests performed as per crop husbandry practices
Tathmini ya maarifa
Knowledge Evidence
Detailed knowledge of:
Method used: The student should be able to explain how to control of insect pests by biological method
Principles: The student should explain the principles of biological control of insect pests
Theories: The student should explain:
- biological insect pest control method
- Signs of insect pest damage to field crops
- Types of insect pests
- Effects of insect pests on crops
- Importance of insect pests control
Circumstantial knowledge: Detailed knowledge about biological control of insect pests
Swali
What is the main purpose of biological control in crop production?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado