Mada za sehemu hiiControlling insect pestsMada 6
Chemical Control of Insect Pests
Chemical control involves using synthetic or natural substances (agrochemicals) to kill or suppress insect pests that damage crops. This method is one of the most effective ways to protect field crops when used correctly and safely.
Chemical control of insect pests is the use of pesticides (insecticides) to prevent, reduce, or eliminate insect pests from damaging crops. These chemicals work by poisoning, suffocating, or disrupting the pests' nervous systems.
Insect pests are grouped based on how they feed and where they attack:
- Chewing pests — eat plant leaves, stems, and roots (caterpillars, grasshoppers, beetles)
- Sucking pests — pierce plant tissues and suck sap (aphids, whiteflies, mealybugs, scale insects)
- Boring pests — tunnel into stems, fruits, or grains (stem borers, fruit flies)
- Soil pests — attack roots and underground parts (termites, wireworms)
Different tools are used depending on the size of the field and the type of pest:
| Equipment | Use |
|---|---|
| Knapsack sprayer | Small to medium fields, spot spraying |
| Boom sprayer | Large fields, uniform application |
| Duster | Applying dust formulations |
| Granular applicator | Applying granule pesticides to soil |
| Measuring cylinder | Measuring liquid chemicals accurately |
| Weighing balance | Measuring dry chemical formulations |
| Water container | Mixing and diluting chemicals |
By Mode of Action
- Contact insecticides — kill pests on direct contact (e.g., permethrin, cypermethrin)
- Systemic insecticides — are absorbed by the plant and kill pests that feed on it (e.g., imidacloprid, carbofuran)
- Stomach poisons — are ingested by chewing pests and kill them (e.g., carbaryl)
By Chemical Group
- Organophosphates (e.g., malathion)
- Pyrethroids (e.g., cypermethrin, deltamethrin)
- Carbamates (e.g., carbaryl)
- Neonicotinoids (e.g., imidacloprid)
Always wear the following before handling chemicals:
- Overalls or long-sleeved clothing
- Gum boots
- Caps or hats
- Masks or respirators
- Gloves
Step 1: Identify the Pest
Correct identification ensures the right pesticide is chosen. Look at the type of damage and the insect present.
Step 2: Select the Right Pesticide
Choose a pesticide labeled for the specific pest and crop. Consider:
- Effectiveness against the target pest
- Safety to humans and beneficial insects
- Waiting period (time before harvest)
Step 3: Calculate the Dose
Follow the label instructions. The dose is usually given as:
- Litres per hectare (L/ha) for liquids
- Kilograms per hectare (kg/ha) for solids
Example: If the label says apply 2 L/ha and you have a 0.5 hectare field, you need:
2 L/ha×0.5 ha=1 L of pesticide
Step 4: Calibrate the Sprayer
Calibration ensures the correct amount is applied. A simple method:
- Fill the sprayer with clean water
- Spray a known area (e.g., 10 m × 10 m = 100 m²)
- Measure the water used
- Compare with the recommended rate
Step 5: Mix the Chemical
- Fill the sprayer tank half with clean water
- Add the measured pesticide
- Stir well
- Fill to the required level
- Agitate before spraying
Step 6: Apply the Pesticide
- Spray during calm, cloudy weather (not hot sun or rain)
- Apply evenly, covering both upper and lower leaf surfaces
- Walk at a steady pace
- Use the correct nozzle for the job
Step 7: Clean Up
- Wash all equipment with soap and water
- Dispose of leftover mixture safely
- Wash PPE separately from household clothes
- Take a shower after application
- Never eat, drink, or smoke while handling chemicals
- Do not spray against the wind
- Keep chemicals in their original containers
- Store chemicals in a secure, dry place away from children
- Observe the waiting period — the days between application and harvest
A smallholder farmer in Morogoro growing maize can use chemical control to protect their crop from stem borers. After identifying the pest and selecting an appropriate insecticide like cypermethrin, the farmer calculates the dose based on the field size (e.g., 1 hectare), calibrates their knapsack sprayer, and applies the chemical following all safety precautions. This helps prevent yield loss and secures the family's food supply and income from selling the harvest.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Identify signs/symptoms of crop pests
- Identify type of crop pests
- Select appropriate chemical
- Select tools and equipment
- Observe safety precautions
- Clean tools and equipment
- Store tools
Tathmini ya matokeo
Chemical insect pest control performed as per crop husbandry practices
Tathmini ya maarifa
Knowledge Evidence
Detailed knowledge of:
Method used: The student should be able to explain how to control insect pests by using the chemical
Principles: The student should explain the principles of chemical insect pest control
Theories: The student should explain:
- Signs/symptoms of insect pest attack
- Type of insect pests
- Effects of insect pests on crops
- Importance of insect pest control
- Chemically insect pests control Circumstantial Detailed knowledge about chemical insect pests control in field crops
Swali
Which group of insect pests feeds by piercing plant tissues and sucking sap?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado