Mada za sehemu hiiPerforming irrigationMada 5
- Performing surface irrigation
- Performing sprinkler irrigation
- Performing drip irrigation
- Performing furrow irrigation
- Performing basin/flooding irrigation
Basin and flooding irrigation are traditional methods of applying water to crops by letting water flow over the soil surface and soak into the ground. These methods are commonly used in Tanzania, especially in areas with flat land and abundant water supply. In this study note, you will learn what basin and flooding irrigation are, how to set them up, and the advantages and challenges of each method.
Basin irrigation is a method where water is held in a shallow, enclosed area (basin) around the crop or a group of plants. The basin is usually formed by making low earth walls (ridges) around a plot. Water is let into the basin and allowed to stand until the soil absorbs enough moisture. This method works well for crops that need plenty of water, such as rice and vegetables.
Flooding irrigation involves covering the field with a layer of water. Water is released from a channel or pipe and flows freely over the field. The depth of the water can be controlled by the amount and speed of water released. This method is often used for rice paddies and pastures.
Step 1: Prepare the Field
- Clear the field of weeds, stones, and debris.
- Level the soil surface using a hand hoe or machine to ensure water spreads evenly.
- Mark out the basin areas or flooding plots according to the crop spacing.
Step 2: Construct Basins or Furrows
- Build low ridges (bunds) around each basin using soil and a hand hoe.
- For flooding irrigation, create small channels (furrows) that will carry water into the field.
- Ensure the ridges are firm and tall enough to hold water without leaking.
Step 3: Connect Water Source
- Set up the water pump and irrigation pipes.
- Connect the pipes to the water source (such as a river, dam, or borehole).
- Position the outlet so water can flow into the basins or channels easily.
Step 4: Apply Water
- Start the pump and let water flow into the basins or across the field.
- Fill each basin or cover the field with the desired water depth.
- Monitor the water level and stop the flow when the soil is thoroughly moistened.
Step 5: Drain Excess Water (if needed)
- After irrigation, open drainage channels to remove excess water.
- This prevents waterlogging, which can damage plant roots.
These irrigation methods are best for:
- Rice (paddy rice is grown in flooded fields)
- Vegetables (tomatoes, cabbages, onions, spinach)
- Maize and wheat (in some areas)
- Pasture grasses and fodder crops
- Simple and inexpensive to set up
- Uses locally available materials (soil, hand hoes)
- Suitable for flat lands common in many parts of Tanzania
- Provides good water coverage for crops that need high moisture
- Water can be wasted through runoff or evaporation
- Not suitable for sloping land (water flows away)
- May lead to waterlogging if drainage is poor
- Requires regular maintenance of ridges and channels
A farmer in Morogoro has a flat field of 20 metres by 30 metres (area = 600 m²) and wants to grow rice using basin irrigation. The farmer constructs basins, each covering 10 m². How many basins can be created, and if each basin requires 50 litres of water to fill, how many litres of water are needed in total?
Solution:
-
Total field area = 600 m²
-
Area of one basin = 10 m²
-
Number of basins = 600 ÷ 10 = 60 basins
-
Water needed per basin = 50 litres
-
Total water needed = 60 × 50 = 3,000 litres
Therefore, the farmer needs 60 basins and 3,000 litres of water for one irrigation cycle.
When performing basin or flooding irrigation, always wear protective gear:
- Overalls and gloves to protect clothing and skin
- Gum boots to keep feet dry and protected from wet soil
- Caps to protect from the sun
Also, check that the water source is clean and free from contamination to avoid spreading diseases to the crops.
In many villages across Tanzania, smallholder farmers use basin irrigation to grow vegetables like tomatoes and onions during the dry season. For example, a farmer in Dodoma may set up small basins around onion seedlings, applying water from a nearby river using a pump. This method helps the farmer produce crops for sale at the local market, earning an income to support their family and pay for school fees.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select crop for basin / flood irrigation,
- Select tools, materials and equipment to perform basin /flooding irrigation,
- Determine the amount of water required,
- Make a trench or other ways to convey water for basin / flooding irrigation, Convey and guide water for basin / flooding irrigation, observe safety precaution,
- Clean the tools,
- Store tools
Tathmini ya matokeo
Basin / flooding / irrigation performed as per laid down crop husbandry practices
Tathmini ya maarifa
Knowledge Evidence
Detailed knowledge of:
Method used: The student should be able to explain how to apply water to the plants through basin / flooding irrigation
Principles: The student should explain the principles of performing basin / flooding irrigation technique
Theories: The student should explain: Basin/Flooding irrigation,
- Quality of irrigation water,
- Crop water requirement,
- Irrigation frequency
- Importance of irrigation
Swali
What is basin irrigation?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado