Mada za sehemu hiiPerforming post-harvest treatmentsMada 3
- Conducting traditional treatments
- Conducting chemical treatments
- Performing packing of field crop produce
Traditional treatment refers to the use of locally available materials and methods to improve the physical and chemical condition of crop produce before storage. These methods help control storage pests, reduce moisture, and extend the shelf life of harvested crops without relying on synthetic chemicals.
Botanicals are natural materials derived from plants that have pesticidal properties. They are biodegradable and safer for human health compared to synthetic chemicals. Common examples include neem (Azadirachta indica), chilli pepper (Capsicum annum), and pyrethrum.
1.1 Powdered Plant-Based Materials
Powdered botanicals are prepared by drying and grinding plant parts (leaves, flowers, seeds, or bark) into a fine powder that is mixed with stored grains.
Steps to prepare powdered botanical treatment:
- Collect plant parts (leaves, seeds, or flowers) – avoid materials that are too young or too old
- Dry completely under sunlight or in a shaded, open area
- Grind dried materials into a fine powder using a mortar and pestle or blender
- Store the powder in an airtight container
- Apply the powder to stored grains at the recommended rate
Example: To treat 5 kg of maize grain, mix 250 g of wood ash thoroughly with the grains and store in a labeled container. After five weeks, observe the condition of the grains to assess the treatment effectiveness.
1.2 Liquid Plant-Based Materials
Liquid botanicals include edible oils (cottonseed, coconut, groundnut, maize, soybean) and non-edible oils (caster-bean oil). These oils affect egg-laying and larval development of storage pests, particularly in legumes.
Application rate: Use 5 ml of vegetable oil per 1 kg of grain or seed. Ensure all seeds are properly coated by mixing thoroughly. Note that oil treatment effectiveness decreases over time, so retreatment may be necessary if pest signs reappear.
Example: For 5 kg of bean seeds, measure 25 ml of vegetable oil, pour it over the seeds, and mix thoroughly by rubbing with hands until all seeds are coated. Store in a container labeled "oil treatment" and compare with untreated seeds after five weeks.
Inert materials are chemically unreactive substances that manage storage pests through physical means. Common inert materials include fine sand, clay dust, kaolin, wood ash, and lime.
How they work:
- Fill spaces between grains, making it difficult for pests to move and respire
- Cause physical injury and dehydration to soft-bodied larvae
- Create unfavorable conditions for pest survival
Example: Mix 5 kg of maize grain with 1 kg of sandy soil, or combine 250 g wood ash + 250 g powdered chilli pepper + 5 kg grains for enhanced protection. Wood ash from mango, tamarind, or derris trees works best.
Note: Some inert materials may alter the taste of treated produce.
Solarization is the practice of exposing harvested crops to direct sunlight before storage to:
- Reduce moisture content
- Kill or weaken adult insects, eggs, and larvae
- Prevent fungal and mould development
Solarization facilities: Raised wooden platforms, concrete floors, tarpaulins, mats, simple solar dryers, or open courtyards.
Procedure: Spread grains thinly on a clean, sun-exposed surface and expose to direct sunlight for several hours, stirring periodically to ensure even drying.
Smoking is a traditional treatment that uses smoke heat to:
- Repel or kill storage insects
- Suppress fungal growth
- Further dry the grains
Smoking facilities: Clay or mud silos, granaries, cribs, or huts with smoke channels designed to release and retain smoke around stored crops.
Advantages:
- Biodegradable and environmentally friendly
- Readily available and inexpensive
- Maintains food quality without harmful residues
- Culturally relevant and easily adopted by local farmers
- Suitable for both seed and grain storage
Challenges:
- Provides less protection compared to synthetic chemicals
- Works slowly due to lower active ingredient levels
- May require larger quantities of material
- Can affect the natural taste of produce in some cases
A small-scale farmer in Mwanza who harvests 10 bags of maize can use traditional treatments like mixing 250 g of wood ash with each 5 kg portion of grain before storage in a polypropylene bag. This low-cost method, which uses locally available materials like wood ash from cooking fires, helps protect the harvest from weevils and larger grain borers for several months, reducing post-harvest losses without spending money on expensive synthetic insecticides.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, materials, equipment and safety gears
- Perform traditional treatments to different field crop produce
- Observe safety precautions
- Clean tools and equipment
- Store equipment and tools
Tathmini ya matokeo
Traditional treatments performed as per recommended standards
Tathmini ya maarifa
Knowledge Evidence
Detailed knowledge of:
Method used: The student should be able to explain how to carry out traditional treatment practices for field crop produce before storage
Principles: The student should explain the principles for traditional treatment of field crop produce before storage
Theories: The student should explain: Traditional field crop produces treatments
Circumstantial knowledge: Detailed knowledge about different requirements for traditional treatment for different field crop produce
Swali
Traditional treatment in post-harvest handling refers to the use of:
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado